ZEBRONICS ZEB-PIXAPLAY 18 Smart LED Vertical Projector User Manual

ZEBRONICS ZEB-PIXAPLAY 18 Smart LED Vertical Projector

Dear Customer,
Thank you for purchasing the ZEB-Pixaplay 18 Smart LED Vertical Projector. Please read the user manual carefully before usage & save it for future reference.
Note:

• To provide a stable power supply, kindly use the cable provided with the product and connect to a AC 100-240V, 50/60Hz power source.
• Avoid the self-disassembly of the product as it results in the failure of Warranty.
• Avoid looking directly at the projector lens while it is active.
• Make sure that the projector’s air vents are not blocked while in use. The device must be kept in a well ventilated surrounding for proper functioning.
• It is recommended to power OFF the projector after a continuous usage of 6 hours.
• Place the projector away from water or other liquids. Avoid water accumulation and ensure good ventilation.
• In case of enquiry regarding the projector, email us at enquiry zebronics.com or contact us at 044 4000 0004.

Features

• Home Theater Projectors for Movies, TV & Gaming etc ..
• Projector comes with AUX OUT, USB , HDMI IN
• Built in Speaker
• Wide Compatibility
• Ceiling Mountable
• Carry Strap
• Remote Control
• Electronics Focus (via remote)
• Miracast
• Dual band Connectivity (2.4GHz & 5GHz)
• FHD 1080p (Native)
• 30,000h lifelong LED lamp
• APP Support

• Quad Core Processor

Specification

• Screen size : 124 – 508cm
• Native Resolution : 1920 x 1080 FHD
• Max. Supported : 1080p (max)
• Resolution : 1 GB
• RAM : Quad Core Processor
• Core Processor Storage :8 GB
• (ROM) Android Version : 9.0
• (2.4GHz & 5GHz): Dual band Connectivity : Dual band Connectivity (2.4GHz & 5GHz)
• Bluetooth Version : v5.1
• Display technology : LED
• Lifespan : 30,000h
• Brightness : 1000:1
• Contrast ratio : 1000:1
• Projection Distance : 1.Sm – 5.9m
• Port Interface : USB x 1,HDMI IN x 1, AUX OUT
• Video file format : AVI, MP4, MPG, MPEG1, MPEG2, MKV, WMV , MOV, H.264
• Input Voltage : AC 100-240V, 50/60Hz Product Dimension : 15 x 16.3 x 23.2 cm (W x D x H)
• Net. weight : 1.8 kg

Package Contents

• Projector : 1 U
• Remote Control : 1 U
• Power Cord : 1 U
• Cotton Swab : 1 U
• Fabric Cloth : 1 U
• HDMI Cable : 1 U
• QR Code Guide : 1 U

Product Description

Remote Control

NOTE:

1.  To avoid power shortage, please do not mix and use the old and new battery.
2.  To avoid battery leakage corrosion, if do not use remote control for a long time, please take the battery out.

Projector Interface

Setting Up the Projector

1. Connect the power cord to the projector and turn it ON, You’ll be indicated with the blue color LED on the power button.
2. Before turning ON, make sure to place it in a flat surface for a proper projection then Press the power button/ turn it on by using the remote.
3. Align the projector as shown in the image below to ensure proper projection.
   

Focus & Keystone Adjustment

Note: There is no manual focus, it has only electronic focus. Do not rotate the lens or it will be damaged.

Once the projector turns ON, wait till it gets loaded. Only after boot-up you’ll be able to adjust the focus lens using the remote as shown in the image above.

Projection

The Projection adjustments like keystone adjustment, Zoom Out can be done using the projection tabs in the settings.

1.  Digital 4D keystone: While most of the Projectors comes with only manual vertical trapezoid correction, resulting in blurred corners, ZEB-Pixa Play 18 has digital horizontal as well as vertical keystone correction, giving you sharp & clear corners.
2. Digital Zoom: With a click of Remote, you can zoom in or zoom out the image to perfectly fit within your screen frame.

Android Home

1. Once the projector is turned on you’ll be directed to the home screen.
2. The home screen displays list of pre-installed apps, Play store, Setting menu, File Manager, lnput source-HDMI etc.
   

Android Settings

Open the homepage, select settings, you can select network settings, Bluetooth settings, projection settings, language settings, date settings, application management, system update, other settings and you can modify related setting options on this projector.

USB Connections

Connect the USB Drive with the content to the projector. You can access the USB drive by either clicking on the USB icon that pops up on the home page or by using the file menu next to the setting icon. The above mentioned screen will pop-up. You can easily access the media either category wise -videos I photos or from the folder itself and play them.

HDMI Interface

Once the HDMI interface is connected to the projector, you will need to select the specific signal source as the input. After connected the content played on the source will be streamed on the projector.

Settings

The settings menu is available at the bottom of the home screen as shown in the image below. This menu contains the settings for Wi­fi, BT, Projection image, Language, Date, System Update, etc.,

Projector distance & size

Note:
Due to optical device error of about 3%, the above data is for reference only, Please use actual measurement when installing the device.

ISO 9001:2015 Certified Company

www.zebronics.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>