LIGHTPRO Avior 181S Dimmable 16W Flood Light User Manual

June 9, 2024
LiGHTPRO

LIGHTPRO

LIGHTPRO Avior 181S Dimmable 16W Flood Light

PRODUCT DESCRIPTION

The Lightpro Avior is an LED spot for outdoor use. The fixture can be installed on a fixed underground with the included screws, or be placed in the ground with the included spike. This product may only be used as outdoor lighting in combination with the Lightpro 12- volt system. Any alterations made to the product may have consequences for the safety, warranty, and correct functioning of the product and/or other parts of the system.

SPECIFICATIONS

  • Product Avior
  • Article number 181S
  • Light source LED 16W AC/DC 12V
  • Power (max) 16W
  • Luminous flux (max) 150 – 1500 lm
  • Light colour 3.000K
  • Average lifetime 25.000
  • Dimensions (H x B x W) 125 x 180 x 68 mm
  • Protection class IP44
  • Ambient temperature -20 °C to 50 °C
  • Cable length 1m
  • Dimmable Yes, with built-in dimmer
  • Light source Not replaceable
  • On/off 10.000

PACKAGING CONTENT

LIGHTPRO Avior 181S Dimmable 16W Flood Light \(1\)

  1. Fixture Oberon Lo/Oberon Hi
  2.  Ground spike
  3. Screw
  4. Plug
  5. Lightpro connector
  6. Hex key

Check if all parts are present in the packaging. For questions about parts, service, and any complaints or other remarks, you can always contact us. E-mail: info@lightpro.nl.

INSTALLATION

Option 1: placement on a fixed underground or mounting to a wall

LIGHTPRO Avior 181S Dimmable 16W Flood Light \(2\)

  1. Remove the screw from the base using the included hex key.
  2. Remove the fixture from the base.

Install the base onto the underground with the included screws. If necessary, drill a hole in the underground and use the included plugs.

LIGHTPRO Avior 181S Dimmable 16W Flood Light \(3\)

  1. Place the fixture in the base.
  2. Place the screw in the base.
  3. Put the fixture in the desired position.
  4. Fasten the screw using the included hex key

Option 2: placement in the ground

  1. Place the spike underneath the base.
  2. Properly fasten the spike.
  3. Put the fixture in the desired position.
  4. Fasten the screw using the included hex key.
  5. Place the fixture in the ground.

DIMMER FUNCTION

The fixture is equipped with a built-in dimmer. The light output can be set to 6 different levels. Push the button to set the desired light output.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals