iDOO ID-IG302S Smart LED Hydroponics System User Manual

iDOO ID-IG302S Smart LED Hydroponics System

Smart Indoor LED Hydroponic System

• Model: ID-IG302S

Important Safety Instructions

1. Please use the power adapter with output voltage of 12V and current of 3A to charge.
2. To reduce the risk of electrical shock, do not alter or change the plug adapter in any way.
3. Always unplug the Gardening Kit from the outlet before performing any routine maintenance.
4. Never use the Gardening Kit if it has a damaged cord or plug adapter. Do not use the Garden­ing Kit if it is malfunctioning or has sustained any type of water damage. For questions regarding a damaged product, contact us via email: support@idooworld.com
5. Keep the cord away from any heated surfaces to prevent damage.
6. Do not use this product outdoors. It is intended for indoor household use only.
7. Do not allow water to touch the hot LED lights.
8. Do not submerge the electrical outlet, cord, plug adapter, or lampshade in water during cleaning.
9. To prevent any water from damaging the machine, always ensure the electrical parts are never submerged in water. If water is spilled over any electrical components, quickly and thoroughly dry all cables and electrical parts immediately.
10. Do not assemble the equipment when it is switched on.
11. It is strictly forbidden to dismantle or refit the equipment on your own.
12. This device is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lacking of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure they do not play with the appliance. This appliance is not a toy.
13. Please keep the water tank clean to avoid bacteria breeding.
14. The max height of the lamp tube is 14.5 inches. Please choose seeds that will grow suitably within these dimensions.
15. Water needs to touch the seedling sponge in the early stage.
16. The heat dissipation temperature of the aluminum shell of the lamp board is less than 122°F, touch carefully to avoid any burns or accidental injuries.
17. After plugging in, do not shake it, which will damage the terminal and cause poor contact.
18. If there are dead or unhealthy plants, they should be removed in time to avoid root erosion and/or bacteria breeding, which may affect the growth of other plants. If rotten roots have occurred, it is recommended to clean the water tank to avoid affecting the surrounding plants.

Product Introduction

0verview

Notice – Please ensure that all seeds have a total growth within the rod height.

Specifications

• Model: ID-IG302S
• Power Adapter: 100-240V~ 50/60Hz
• Input: 12V=3A
• Working Temperature: 39° F-122° F / 4-50°C Water tank capacity: 6.5L
• Material: ABS
• Fan Noise: 40 dB
• Pump input: DC 5V 300mA
• Pump Flow: 140L/h
• Light Panel: NOT Waterproof
• Package Size: 15 12 7.Sinch/39 x 30 x 20cm
• Gross Weight: 5.7Ib/2.58kg

Included in Package

installation

• Step 1: Insert the extendable rod into the planting box.
• Step 2: Press the lamp panel tightly on the extendable rod.
• Step 3: Insert the power cord into the corresponding port on the lamp panel. (One for water pump and one for power source)
• Step 4: Lay the water tank top cover on the machine.

How to Raise and Lower the Lampshade

To raise or lower the Lampshade, rotate the knob on the back of the pod to adjust its height. Tip: When planting a new seed pod, set the lampshade to the lowest possible position.

• Max height: 14.5 inches
• Min height: 7.5 inches

Standard Operation Procedures

Step 1: Add Water

• Rotate the cap of the water tank. Pour tap water or bottled distilled water through the hole.
• Do not use well water which may interfere with our nutrients, or softened water, as it contains levels of sodium, which is usually harmful to plants.
• If the water level is below 1L, the Fan & Water light will flash blue. The light will stop flashing after topping off the water. For best results, keep the water level between 5L-6.5L.

Note: When adding water, always remember to add nutrition in proportion.

Step 2: Add Nutrients

• Fill A nutrient bottle with room-temperature tap water or bottled distilled water. Shake it until it’s well mixed.
• Fill B nutrient bottle with room temperature tap water or bottled distilled water. Shake it until it’s well mixed.
• Add 30 milliliters A solution and 30 milliliters B solution when adding 6-liter water to the tank.

Ratio of Water and Nutrition

Nutrient Feeding Tip:

1. Too much nutrient may be harmful to your plants.
2. Always top off water level when adding Liquid Nutrients. 1-Liter water needs to add into 5 milliliters A solution and 5 milliliter B solution. For best results, top off the water level in your garden regularly.
3. Do not use well water or softened water. Most well water contains a high amount of dissolved solids that upset the balance of our nutrients, and softened water adds sodium. This can result in the phenomenons that plants suddenly brown, or just not grow well.
4. Shelf life: Nutrient particles have a storage life of 2 years in unopened bottles if stored at the ambient temperature without exposure to sunlight.
5. Well-mixed nutrient solutions have storage life of 5 months if stored without exposure to sunlight.

Step 3: Plug-In

1. Do not plug the adapter when there is no water in tank.
2. You will see the power indicator light turn red and flash yellow after plugging the adapter, indicating that light panel can be controlled.
3. Press the power button to turn it on, and run on Vegetables Mode (16h-on-and-8h-off-cycle).
4. In the meanwhile, the water pump and the fan will turn on by default (30mins-on-and-30mins­ off-cycle).

Method of Planting Seedlings

1. The garden kit does not include the seed. Choose the seed of a well-known brand at local. Add 3-4 seeds to per sponges to improve germination rate. Some seeds germinate in less than 24 hours, Some take 1-4 weeks. Please be patient. Choose one seedling when the seeds grow into seedlings. More seedlings probably result in poor growth due to insufficient nutrients.

Step1

1. Take out the small planting basket and the sponges, put the sponge into the small planting basket. Put 3-4 seeds into the wet sponge.
   • Tip 1: The seedling cover is to help the seeds germinate. Tip 2: Use the soaking method to eliminate bad seeds. It is recommended to soak the seeds in water for 2 hours, and then choose the seeds that sink to the bottom. The germination rate of these seeds will be higher.
   • Tip 3: The basket label is to prevent the sponge from getting moldy/algae.

Step2

1. Place the small planting basket on the planting cover plate. Add water through the water inlet till the water level go up to the bottom of the planting basket.
2. Choose the vegetables mode or flowers and fruits mode according to the actual needs.

Step3

• After the seeds germinate, keep one seedling only.
  • Tip 1: Observe the water level, keep the water level on 5L-6.5L.
  • Tip 2: 1-Liter water needs to add into 5 milliliters A solution and 5 milliliter B solution.
  • Tip 3: When the Fan&Water light flashes blue, it indicates it’s short of water. Please add water. Tip 4: When you plant large plants, some pots are not in use, put the cactus cover on.

Control Panel Settings

Power:

• After plugging in, the power indicator light will turn red and flash yellow.
• Press the power button to turn on the device. The device has memory function, it will enter into last selected mode. If you press the power button to turn it off, it will not be automatically turned on.

Fan/Water mode:

• Long press the button for 3 seconds: Turn on/off the fan only
• Short press the button: Turn on/off both the fan and the pump
• When the fan and the pump are on:
  • Short press the button: The pump & fan will enter sleeping mode and automatically turn on with the light, running in the cycle of 30mins-on and 30mins-off.
  • Short press the button again: The pump & fan will turn on.

Note:

• If you have turned off the fan only, the fan will not automatically turn on with the light. You should press and hold the button to turn on the fan.
• If you have turned off the fan only and pressed the button again, only the pump enters the sleeping mode.
• The pump automatically turns on with the light and runs in the cycle of 30mins-on and 30mins-off.

Tip:

• When the Fan&Water pump is on, the indicator light is Blue.
• When the water is below about 1L, the fan&Water light flashes, please add water and nutrient in proportion. (If the pump is not turned on, there will be no prompt.)

Vegetables Mode & Flower/Fruits Mode:

• Runs on a 16h-on-and-8h-off-cycle. Press either of the mode button, and the corresponding indicator lights will turn Blue.
• Press it again to turn it off, after 10 hours of shut-off, the selected mode will be automatically turned on.
• Under Vegetables Mode, the LED lights contain far-red/red/white/blue light.
• Under Flower/Fruits Mode, the LED lights contain far-red/red/white light.

LED Light Mode Switch

1. You can switch two modes freely, when it’s on Vegetable mode, press the Flower & Fruits button to switch it to Flower & Fruits mode, vice versa. The cycle will re-timing after each switch.
2. If you feel that the light affects your sleep, you can turn off the light by pressing the current mode button, and the light will be automatically activated after 10 hours. This design is to prevent the user from forgetting to turn it on after turning it off.

Note:

1. DO NOT turn off the power, otherwise, it will not start automatically.
2. Memory function: The product has a memory function (only for two modes), whether it is powered off or in standby mode, the next time it is turned on, it will return to the last selected mode.

Important Notes about LED Light

1. Once you choose a light mode, the light will automatically turn on and off to provide your plants with “sunshine” needed. There is no need to manually turn the lights on or off.

APP Operations

Note: Due to continuous updates and improvements, the Gennec app may appear slightly different.

Download the APP

Search and download the “Gennec” APP from the Apple Store / Google Play, or scan the QR code below to download the APP.

Register/Log in

Open the “Gennec” APP. To create a new account, tap Register. If you already have an account, tap Log in.

Add Device

Notes: Please check the following before starting.

• • Make sure your phone is connected to a secure 2.4 GHZ Wi-Fi network. The device can only be set up on a secure 2.4 GHZ network.
• • Make sure your Smart Garden is close to the router.
• • Make sure the Wi-Fi signal is strong enough while connecting.
• • Authorize the location information and open Bluetooth before using the device.

Add Device through EZ Mode (Recommended)

• Plug in the device: the power indicator light flashes yellow, open the “Gennec” app on your phone and start pairing the device with the app.
• A solid green light indicates that the connection is successful.
• There are three ways to connect the Smart Garden through EZ mode.

Method 1

• When you open the Gennec APP, a pop-up window will appear. Tap “Go to add’; then select the device.

Tip: if no window pops up, you can slide down to refresh the page.

• Input the Wi-Fi password and click “Next” to add the device. Wait a few seconds for the device to be added and tap “Done”.

Method 2

• Tap “Add Device” or”+” in the upper right corner, then tap “12 Pods Smart Garden” under the Smart Home category. Input the Wi-Fi password and click “Next” to add the device.

• Wait a few seconds for the device to be added and tap “Done”.

Method 3

• Tap “Add Device” or”+” in the upper right corner, then tap “Auto Scan”.

• Wait a few seconds for the device to be detected, and then tap “Next”.

Configuration in AP Mode

If the Default Configuration Mode (EZ Mode) fails to connect, you can use AP (Access Point) Mode. First, check that the indicator is blinking rapidly. If it is, press and hold the “Power” button on the device for 3-5 seconds to enter AP Mode; the indicator light will blink green slowly.

• Follow the following steps.

• Tap the upper right corner and switch to AP Mode, then follow the instructions step-by-step to reset the device.

• Tap “Go to Connect” to connect your phone to the device’s hotspot. Choose “Smartlife_XXXX” and connect. “XXXX” is a code consisting of numbers and letters. The code for each Smart Garden is different.

• When Smartlife_XXXX is connected (no internet access), go back to Gennec and wait for the device to be added. Once it shows “Done”, this indicates that it has been successfully added. The Power indicator light will then display solid green.

Operating Instructions

Home Page

• Tap “12 Pods Smart Garden” to access the Home Page (the first time the device is successfully added, it will directly access the home page).

• After entering the APP interface, it will display the current status of the product. You can turn the device off and on by pressing the Power button.

• You can choose either mode by simply tapping “Flowers & Fruits; or “Vegetables”. Flowers & Fruits mode is suitable for plants like dwarf tomatoes, peppers, strawberries, daffodils, etc.), and vegetables mode is suitable for plants like basil, lettuce, rosemary, cabbage, parsley, coriander, etc.)

• You can also power the “Light’; “Pump’; or “Fan” on or off by pressing the corresponding switch key on the home page.

Settings

For more detailed settings, tap the corresponding module directly, or tap “Settings” on the home page.

Light Settings

• Tap “Lights” to enter the Light Settings. Then tap “Custom Settings” to customize the light time for different growing stages.
• Tap or click “Save” to complete the time setting. The default timer is 16 hours on and 8 hours off.

Collection function:

• If you find certain time settings more practical, tap ‘Collection’ to add it to the Collection List and assign a name to it so you can apply it to the same plant next time.

Note:

• If you turn off the lights manually, the device will go to sleep for 10 hours. Sleep time is deducted from the light cycle.
• For example, the default light time is 16 hours on and 8 hours off. If you turn the light off after it has been on for 5 hours, the light will resume with 1 hour remaining.
• If you turn the light off after it has been on for 10 hours, the light will automatically turn on after 14 hours.

Water Pump Setting

• Tap “Water Pump” to enter the Water Pump Setting. You can customize the pump runtime for different plants or for your own routine. The default timer is 30 min-on and 30 min-off.
• If you turn off the pump on the app, the pump will enter sleeping mode and automatically turn on with the light.

Note: When the device is short of water, the pump section on the home page will indicate as shown below. Please add water in time.

Fan Setting

• Tap “Fan” to enter the Fan Setting. You can simply turn the Fan on or off, which you can do directly on the Home Page as well.
• If you turn off the fan on the app, the fan will never automatically turn on.
• If you turn on the fan on the app, the fan will be on and serve the same running cycle as the pump’s next running cycle.

Days Planted Setting

Tap “Days Planted” to enter Days Planted setting. You can manually modify or reset the Days Granted by inputting a specific number of days.

Plant Diary

Tap “Plant Diary” on the Home Page, then you can add your plant diary. You can set the name, date, and time to start recording different stages of growth. Tap “Save” to save the settings. To delete the Diary, simply tap the bin icon.

Select the new Plant Diary entry, then you can edit the content. Tap “Add Content” to upload content and pictures to record the growth of the plants at different stages. Tap “Save” to save the contents. Tap the bin icon to delete the content of this record.

Remove device

• Tap the pen icon at the upper-right corner of the Home Page to enter the interface shown below, slide down, and tap “Remove Device” to remove and reset the device. This will help troubleshoot issues you may encounter, including if your planter has gone offline.

Tip: If you want to connect this device to another phone, you can either remove the device, or press and hold the Power button until the Power indicator light flashes, so that the product can enter network configuration mode.

• We have prepared a detailed FAQ for each function setting: “Light Settings” for example. Tap “Information about Light” ➔”FAQ about Light” to enter.
• We also offer some planting tips for your reference. Go to Settings and tap “Planting Tips” to view the details.

Gardening Tips for Maximum Harvests

Germination

• Check the seed information regarding the optimal temperature and days to germinate. Plant 3-5 seeds per sponge. Some seeds germinate in less than 24 hours, while take 1-7 days, others require 1-4 weeks.
  • Note: Plants have seasonal, periodic, and regional characteristics. Characteristics of different plants (temperature, light, and atmospheric humidity) are all related to plant growth. Planting crops suitable for local growth in the current season is the best.
• If there are plants that have sprouted, turn on the Light Panel. Do not wait for all the plants to sprout, otherwise those sprouted plants will grow excessively. You do not need to turn the light on when you first place them and had better wait until the seeds have finished germinating.
• The basket lid helps regulate moisture and temperature for optimal seed germination. Leave them on until plants are nearly touching the lid, then take it off to allow for normal growth.
• For larger plants, it is recommended to plant them at a separate distance to allow for better overall growth. Cover the empty holes to prevent the Water Tank from being exposed to light, which could potentially allow for mold and bacteria growth and affect plant roots.

Transplant

• Only when you see rhizome (plant stems) around the sponge, may you transplant the seedling.
• Split the sponge to take one seedling out and move it to another pot.
• Put the sponge back, only keep one seedling in the sponge to allow sufficient nutrition.

Pruning

• Prune your plants to maintain their height, rather than continuing to raise the Light Panel. Pruning ensures your plants stay compact and healthily distanced from the Light Panel, which will provide you with a bigger harvest!

• Pruning the plant just above a new leaf set while maintaining the Light Panel height will ensure that slow-growing plants in your garden get all the light they need to flourish.

• Prune often to maintain a healthy garden, but never take more than 1/3 of each plant at a time.

• Plants compete for light. Left untended, faster-growing plants can even begin to block enough light to suppress the growth of their slower-growing neighbors. Spreading leaves must be trimmed to ensure slow growers continue to receive enough light to thrive and produce big yields.

• Finally … pruning can also mean harvesting. Each time you prune you get to enjoy fresh herbs in a salad, soup on pizza, or a sandwich. A full, healthy garden will look much better than a giant, uncontrolled mess. Pruning keeps control of your Gardening Kit!

Pollinating

• Because most people do not have bees in their homes, you will need to start manually pollinating your fruiting plants (tomatoes, peppers, etc.) once they begin to flower (approximately 4-6 weeks after planting). To pollinate, use one or more of the following methods:
  • Place an open hand inside plant branches and gently move your hand back and forth to shake the plant and spread the pollen. Do this carefully to avoid injury.
  • Use one cotton swab or fine brush to gently rub the flowers of different plants and promote the effects of cross-pollination.

Flowering and Fruiting

• Change the water and add proportionate nutrition once per week, ensuring the plant can absorb enough potassium so that it can flower and fruit.
• In a high-temperature environment, the nutrient solution concentration will be high due to rapid water evaporation. Be sure to change the water once about 7-15 days.

Harvesting

• The Gardening Kit works best with a harvesting method called “cut and come again.” Simply put, you enjoy frequent small harvests and then watch as the plants rapidly regrow – ready for harvest again and again.
• Enjoy frequent, smaller harvests for the first month or two until plants mature to offer larger harvests.
• Harvest often to maintain a healthy garden, but never take more than 1/3 of each plant at a time.
• For most salad greens and herbs, cut the top 2 inches off the entire garden, or harvest large leaves individually by cutting them off from the base of the plant.
• Here we list some plants’ optimal temperatures and illumination times. It is for reference only. The suitable growth requirements for plants in different families change in terms of: air humidity, ventilation effect, and nutrient content conditions.

Product Maintenance

Changing water

1. In a high-temperature environment, because the water evaporates faster, the concentration of the nutrient solution will be higher, so you can change the water about every 7-15 days.
2. After the plants bloom, change the water once a week to ensure that the potassium content is sufficient. There is a drain hole at the back of the water tank. Remove the rubber plug and the water will flow out.

Note: When changing water, always remember to add nutrition in proportion.

Cleaning Pump

Clean the water pump at least once a month.

• Step 1. Turn the power off.

• Step 2. Remove the top cover of the water tank.

• Step 3. Open the shell of the water pump and take out the cotton to clean. Rinse it with water ONLY. Any washing liquid will harm the nutrition balance.

• Step 4. Install it back.

• Do NOT plug the adapter when there is no water in the water tank, it will shorten the life of the pump.

Important Note: During the planting process, if there are dead plants and other badly growing plants, they should be removed in time to prevent root erosion bacteria from affecting the growth of other plants. If root rot has occurred, it is recommended to clean and disinfect the water tank to avoid affecting the next planting.

Place Your Garden

• On a sturdy, water-tolerant surface.
• In a 59° F-86° F (15-30°C) environment (optimal).
• Beyond the reach of children or pets.
• Away from direct sources of heat ( stove, furnace vents, e.g.,) or cold ( window drafts, A/C vents, e.g.,).
• The Indoor Garden Kit does not need additional light or a sunny window. In fact, too much direct sunlight can overheat your plants.

Troubleshooting

Frequently Asked Questions & Answers 

• Why do only a few of the plants grow and once grown, they quickly wither?
  • The seeds you purchase make a difference. For best results, purchase seeds from reliable manufacturers and avoid purchasing seeds that are not suitable for water hydroponic devices.
  • Ensure you are using the correct proportion of nutrient solution to water.
  • Place it in a 59° F-86° F (15-30°C) environment.
• Why does the pump start with noise?
  • Take out the filter cotton and check whether there is a jam inside.
  • When the water level is below the pump, add water to 5L-6L, and the noise will stop.
• Can sponges be reused?
  • It’s reusable if stems of a plant are pulled out from the sponges, but we don’t recommend doing so as it’s not as good as the first use. We have specific links to purchase extra sponges.
• Does it kill the plant to remove it from a sponge (if I want to move it to a pot, for example)?
  • Normally, it won’t, but you had better wait until it’s vigorous when the survival rate is high.
• Why doesn’t it germinate?
  • It may differ by temperature. You can try to cultivate it in the soil to test whether it is the problem of the seeds.
• Why doesn’t it bloom or bear fruit?
  • Make sure the nutrition is enough. Always top off the water level and add liquid nutrients proportionally.
• How to prevent the sponge from getting moldy / algae?
  • 12 basket labels are included in the package to prevent the sponge from getting moldy/algae. You can also cover the sponge with an opaque film, such as tin foil.

Warranty (1-Year Period)

The manufacturer’s warranty is void under the following circumstances but not limited to:

• Improper or inadequate maintenance or modification.
• Accident, misuse, abuse, contamination, or other external causes.
• The use of unspecified adapters and accessories.
• Loss or damage in transit.
• Damages that occurs as a result of one’s failure to follow instructions.
• This warranty does not apply to expendable or consumable parts and does not extend to any product from which the serial number has been removed.

FCC Regulatory Compliance

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radiofTV technician for help.

RF Exposure Compliance

• This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

ISED Regulatory compliance

• This device contains license-exempt transmitters that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s).

Operation is subject to the following two conditions:

• This device may not cause interference.
• This device must accept any interference, including interference that may cause undesired operation of the device.

Customer Service

We have an award-winning warranty, exchange, and customer service team that guarantees hassle-free solutions to any issue you might have within business hours.

• Tel: +1(951)751-2590
• Monday-Friday: 9:00-16:30 PST
• Email: support@idooworld.com

US Importer

JOICOM CORPORATION

• 14129 The Merge Street, Building 3 Unit A, Eastvale, CA 92880
• Manufacturer: Shenzhen Ruiyi Business Technology Co., Ltd.
• Qianhai Complex A201, Qianwan Road 1, Qianhai Shenzhen-Hong Kong Cooperation Zone, Shenzhen, P.R.China

FrequentlyAsked Questions

What is the iDOO ID-IG302S Smart LED Hydroponics System?

The iDOO ID-IG302S Smart LED Hydroponics System is an innovative indoor gardening solution that integrates smart technology with hydroponics for optimal plant growth.

How does the iDOO ID-IG302S Smart LED Hydroponics System work?

The iDOO ID-IG302S system utilizes LED grow lights, automatic watering, and nutrient delivery systems to create an ideal environment for plants to thrive without soil.

What are the key features of the iDOO ID-IG302S Smart LED Hydroponics System?

The iDOO ID-IG302S system features customizable LED lighting, automatic watering cycles, adjustable height settings, and a user-friendly control panel for easy operation.

Can the iDOO ID-IG302S Smart LED Hydroponics System be used for all types of plants?

Yes, the iDOO ID-IG302S system is suitable for a wide range of plants including herbs, vegetables, flowers, and more, making it versatile for various gardening needs.

Is the iDOO ID-IG302S Smart LED Hydroponics System suitable for beginners?

Absolutely! The iDOO ID-IG302S system is designed with user-friendly features that make it ideal for beginners looking to start their indoor gardening journey.

How energy-efficient is the iDOO ID-IG302S Smart LED Hydroponics System?

The iDOO ID-IG302S system uses energy-efficient LED grow lights that help reduce electricity consumption while providing optimal light spectrum for plant growth.

Does the iDOO ID-IG302S Smart LED Hydroponics System come with a warranty?

Yes, the iDOO ID-IG302S system typically comes with a warranty to ensure customer satisfaction and peace of mind regarding product quality and performance.

How often should I change the water and nutrients in the iDOO ID-IG302S Smart LED Hydroponics System?

It is recommended to change the water and nutrients in the iDOO ID-IG302S system every 1-2 weeks to maintain optimal growing conditions for your plants.

Can I adjust the lighting schedule on the iDOO ID-IG302S Smart LED Hydroponics System?

Yes, you can easily customize the lighting schedule on the iDOO ID-IG302S system using the control panel or through a connected mobile app for convenience.

What are some tips for maximizing plant growth with the iDOO ID-IG302S Smart LED Hydroponics System?

Ensure proper nutrient levels, monitor plant growth regularly, adjust lighting intensity as needed, and maintain cleanliness in the system to optimize plant health and growth.

How does the automatic watering feature in the iDOO ID-IG302S Smart LED Hydroponics System work?

The automatic watering feature in the iDOO ID-IG302S system delivers water and nutrients to your plants at scheduled intervals based on your settings, ensuring they receive proper hydration.

Can I grow plants from seeds using the iDOO ID-IG302S Smart LED Hydroponics System?

Yes, you can start seeds and propagate plants effectively with the iDOO ID- IG302S system by providing them with the necessary light, water, and nutrients for successful germination and growth.

Download the PDF:iDOO ID-IG302S Smart LED Hydroponics System User Manual

Reference:iDOO ID-IG302S Smart LED Hydroponics System User Manual- device.report

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>