Honeywell SK-F485C Fiber to SBUS Converter Instruction Manual
- June 9, 2024
- Honeywell
Table of Contents
Honeywell SK-F485C Fiber to SBUS Converter
General
The SK-F485C offers a seamless conversion from panel SBUS connection to fiber and back again.
Features
- Fiber connection duplex ST connectors for Tx and Rx data fiber cable duplex is 62.5 micron. Multimode fiber data rate 115.2K bits/second
- Fiber distance Up to 1.0 mile (1.6Km) SK-F485C connection (two-wire) or terminal strip, and jumper selectable bias / termination
- Maximum attenuation 5.5db
- SK-F485C Data Direction Control Automatic half duplex transmitter enable control, for any baud rate / data bits
Installation
The SK-F485C can be mounted using the standoffs on the board in the cabinet of
a compatible FACP. The 5815RMK remote mounting kit can also be used allowing
up to two SK-F485C converter modules in a single cabinet.
Compatibility
The SK-F485C is compatible with the following FACPs:
- IFP-50
- IFP-100
- IFP-1000
- IFP-2000
- RPS-1000
- 5700
- 5820XL
- IFP-2000VIP
- IFP-100ECS
- IFP-1000ECS
- RPS-2000
- 5496
- 5808
Specifications
- External Power Supply: 9 – 35VDC @ 125mA max
- Operating Temp: 32° – 120°F (0-49°C)
- Humidity: 10%-93% (non-condensing)
- Dimensions: 4.75” x 4.25” x 1.0”
Ordering Information
SK-F485C Copper to Fiber Converter P/N 351559 Rev A © 2012 Honeywell
International Inc.
Wiring
Follow the table for wiring SK-F485C to a compatible FACP.
Connecting Fiber from Panel to Power Supply
This document is not intended to be used for installation purposes. We try to keep our product information up-to-date and accurate. We cannot cover all specific applications or anticipate all requirements. All specifications are subject to change without notice. For more information, contact Silent Knight 12 Clintonville Road, Northford, CT 06472-1610
Phone: 800-328-0103, Fax: 203-484-7118. www.farenhyt.com