GRABO Slender Seal for Lifting Surfaces Instruction Manual
- June 9, 2024
- GRABO
Table of Contents
Slender Seal for Lifting Surfaces
Instruction Manual
INSTALLATION INSTRUCTION
HOW TO CHANGE /REPLACE SEALS
Slender Seal for Lifting Surfaces
STEP 1 To change or replace your existing foam-rubber seal type A 1 that comes with your GRABO tool, gently remove the seal from the base of the GRABO vacuum suction cup. (Store the seal properly for future use if it is not damaged or worn out). STEP 2 Carefully press the Slender Seal attachment into the base of the GRABO’s vacuum suction cup. Ensure the Slender Seal attachment fits snugly and securely before use.
STEP 3 – Replacing a seal part Should the outer black foam seal of the
Slender Seal system require replacement due to damage or wear and tear; remove
the outer black foam seal and carefully press the replacement seal into place.
Ensure the outer black foam seal fits snugly and securely before use.
WARNING:
Slender Seal maximum lifting capability (with no safety margin) – 120kg
Slender Seal lifting capability with 2:1 safety factor – 60kg
www.GRABO.com
+1(844) 430-0510 [email protected]
FIND A RETAILER REGISTER PRODUCT CONTACT
Documents / Resources
|
GRABO Slender Seal for Lifting
Surfaces
[pdf] Instruction Manual
RK23002, Slender Seal for Lifting Surfaces, Slender Seal
---|---
References
- GRABO â — Portable electric vacuum lifter - heavy lifting made easy
- GRABO Customer Service - Contact Us and our staff will help you!
- General Warranty Information about GRABO Products
- GRABO authorized dealers are diverse and spread worldwide
- GRABO, this small, powerful, portable, battery powered lifting device has revolutionized the world of suction lifting technology. Come and join the revolution.
- GRABO Factory Shop