dji CP.FP.00000111.01 Avata Fly Smart Combo User Guide
- June 4, 2024
- DJi
Table of Contents
dji CP.FP.00000111.01 Avata Fly Smart Combo
INSTALLATIONS
Linking and Activation
For Pro-View or Fly Smart Combo, linking is required if the status
indicator on top of the aircraft
blinks yellow quickly after all the devices are powered on.
The separately purchased aircraft has to link to the goggles and
controller. Make sure that the devices used with the aircraft have been
updated to the latest version via the DJI ASSISTANT TM
2 (Consumer Drone Series) software (https://www.dji.com/avata/downloads )
before linking and powering on all the devices.
Figure A: Link Aircraft and Goggles
-
Press the link button on the goggles. The goggles will start to beep continually.
-
Press and hold the power button on the aircraft until it beeps once.
-
Make sure the live view is displayed in the goggles.
Figure B: Link Aircraft and Motion Controller -
Press and hold the power button on the aircraft until it beeps once.
-
Press and hold the power button on the controller until it starts to beep continually.
-
Beeping stops once linked.
Figure C: Connect the USB-C OTG cable to the USB-C port of the goggles and then to the mobile device with a suitable cable (not included), run DJI Fly, and follow the prompts to activate all DJI devices.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>