Blukar K9137 Bluar LED Torch User Guide
- June 14, 2024
- Blukar
Table of Contents
Blukar K9137 Bluar LED Torch
Welcome
Thank you for purchasing this Blukar product. In order to ensure the best
performance and safety, please read this user manual carefully and save it for
future reference. If you need any additional assistance, please contact our
customer support team or send us an email to
support@blukar.com.
Specifications
- Material Aluminium Alloy
- Input DC 5V/1.5A
- Power 3W
- Battery Built-in 18650 Lithium Battery, 1800mAh
- Modes High / Medium / Low / Strobe / SOS
- Zoom Mode Zoom Out / Zoom In
Package Contents
- 1 xLED Flashlight
- 1 xUSB Charging Cable
- 1×User Manual
5 Lighting Modes
- Short press the button to turn the light on / off and adjust the light mode.
- In any operating mode, if you select a brightness mode and no operation for more than 8 seconds, the light will directly switch off when you press the button again.
Zoomable Design
- Zoom Out: To enlarge the illuminated area.
- Zoom In: To gather light for maximum intensity.
Charging
- Please make sure the product is fully charged when you use it for the first time.
- The four-cell battery indicator shows the corresponding charge level.
- Please use the included or certified USB cable for charging when the light is dimmed.
- Charging: blue light flashing; fully charged: the blue light is always on.
- The blue light will flash when the flashlight power is weak.
Warning
- Avoid drops, impact, and extrusion.
- The high light mode is very bright; in this mode it is normal for the torch to heat up. The perceived temperature depends on personal perception and the ambient temperature. The maximum temperature is within the standard limits. The torch is safe to use.
- Do not disassemble and replace the internal parts of the lamp by yourself, so as not to damage the product or even cause safety hazards.
- The light source of this luminaire is not replaceable and the whole luminaire should be replaced when the light source has reached the end of its life.
- It is not recommended to leave the product in an uncharged state. If not used for a long period of time, charge the torch at least once every 3 months.
- Please use a safety-certified adapter when charging, and never overload the circuit, as this may cause electric shock or fire. Cut off the power in time after fully charged.
- Do not use this product in extremely hot or cold environments (<-25°C / >40°C).
- Keep it away from water, fire, flammable gas and corrosive liquid.
- Children should use this product under the supervision and guidance of adults.
- Do not look directly into the light source to avoid eye irritation.
- In order to prolong the service life of the battery, please do not overcharge or over discharge.
about company
- TEL: 1-800-360-5881
- EMAIL: support@blukar.com
- WEBSITE: www.blukar.com
- © Shenzhen Teng Xun Zhan Yi Technology Co., Ltd.
- All rights reserved.
- Blukar LED Torch
- Model No.: K9137
- Manufacturer: Shenzhen Teng Xun Zhan Yi Technology Co., Ltd.
- Manufacturer Address: Room 302, Building 8, Yunli Intelligent Park, Fada Road, Bantian Street, Longgang District, Shenzhen,Guangdong, China
DISPOSAL
This product is subject to the provisions of European Directive 2012/19/EC. The symbol showing a wheelie bin crossed through indicates that the product requires separate refuse collection in the European Union. This applies to the product and all accessories marked with this symbol. Products identified with this symbol may not be discarded with normal household waste, but must be taken to a collection point for recycling electric and electronic appliances. This recycling symbol marks e.g. an object or parts of the material as valuable for recycling. Recycling helps to reduce the consumption of raw materials and protect the environment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>