MEARI Flight 8 Floodlight Camera User Guide
- June 9, 2024
- MEARI
Table of Contents
MEARI Flight 8 Floodlight Camera
What’s in the box
Consult the checklist below for all components.
Description
Power / Status light
- C 100~240V
- Blinking red light: waiting for network connection
- Solid blue light on: camera is working correctly
- Solid red light on: the network is malfunctional
- Microphone
- Capture sounds for your video
- SD card slot
- Support local SD Card storage (Max.128G)
- Reset
- Press and hold for 5 seconds to reset the device (if you
- have modified settings, they will return to factory defaults)
- Light
- Turn the light on/off manually or automatically. And you can adjust brightness by App.
Installation
Fix the mounting bracket onto the junction box with screws.
Please select the appropriate screw size according to the actual situation.
- Connect the L wire, N wire and PE wire of the same color together, and cover them with waterproof terminals.
- Tighten the nuts and spacers.
Download
SmartLife or Tuya Smart is available for both iOS and Android operation
system.
Search the name “SmartLife” or “Tuya Smart” in App Store or Google Play, or
scan the QR Code to download the App.
You can select the App according to needs.
Set up router
Please note that the device supports the 2.4GHz WiFi (doesn’t support the
5GHz).
Please set the parameters of the router before connecting the WiFi network,
and record the SSID and password of your WiFi.
Registration
Registration process
-
Step 1
Open the App, click “Sign Up” to register.
If you already have an account, click “Log In” to log in. -
Step 2 Input a legal Email address and check the privacy agreement.
Then enter the verification code finish registration.
Home Management
- Step 3 Click “Me” > >”Home Management” >>”Create a home”, and you can customize the home name and related settings.
Device Adding
-
Step 4
Click “Add Device” and then select the corresponding device icon to add.
-
Step 5
Power on the device.
And then reset the camera and click “Next” on App.
-
Step 6
Select the WiFi network and input the password, and then click “Next”. Make sure that your phone has connected to a fluent and steady WiFi already .
Note:
- Camera only supports 2.4GHz WiFi network.
- The number of bits in the SSID and passwords of the router should not exceed 24 digits.
-
Step 7
Scan the QR code in your phone with the camera and click “Next”, when the camera comes out “dong dong dong”. And you can complete the configuration about 30s. -
Step 8
When connecting, you should make sure your router, mobile and camera are as close as possible. And you can DIY device’s name and assign the room.
Settings
- Step 9
In live view interface, click ” … “, and then you can set up the device common functions.
FAQ
- Q: The device cannot be previewed properly?
- A: Check whether the network is normal, you can place the camera close to the router, and if not, it is recommended to reset the device and add it again.
- Q: Why is it still in the list of devices after resetting?
- A: The reset device only resets the network configuration of the camera, but cannot change the configuration on the App, remove the camera, and must be deleted by the App.
- Q: How to cut the camera network to another router?
- A: First remove and reset the device on the App and then configure the device again by the App.
- Q: Why doesn’t the device identify the SD card?
- A: It is recommended to plug in SD card after power cut. Confirm whether the SD card is normally available and the format is FAT32. And the TF card can’t be identified when the Internet environment is not good.
- Q: Why I can’t get the notifications with my cell phone App?
- A: Please confirm that the App has been running on the phone, and the relevant reminder function has been opened; Message notification and authority confirmation in the mobile phone system have been opened.
Function
Lighting Control
You can turn the light on or off with time setting or PIR, and you can adjust
brightness by App.
Motion detection
Support smart motion detection.
The camera will detect movements, and then send you push notifications and app
alerts.
And you can set up motion detection area according to environment.
Noise detection
Support noise detection, it can detect noises caused by accidents.
Two-way Audio
You can see and hear the visitor in your App from the camera.
PIR
When the camera detects someone stopping by, it sends an alarm message to your
cell phone.
Record
Using SD card or activating the Cloud-Storage Service to keep recording for
every moment.
Day & Night
Powerful night vision without any interruption, even in complete darkness.
Functions
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which threceiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and consider removing the no-collocation statement.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Caution!
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>