ORVIBO MixPad D1 Smart Dimmer Switch User Manual
- June 13, 2024
- ORVIBO
Table of Contents
MixPad D1 Smart Dimmer Switch
Product Information:
The product is a smart device that requires a stable 2.4GHz Wi-Fi
network with internet access for setup and operation. It is
recommended to avoid connecting the device to a 5GHz network. If
you encounter any issues during the setup process, please follow
the troubleshooting steps below:
Product Usage Instructions:
1. Connect your phone to a stable 2.4GHz Wi-Fi network with
internet access. Ensure that the Wi-Fi signal is strong and stable.
2. If the device fails to set up, turn off the power by unplugging
it from the power source. 3. Wait for a few seconds, then turn on
the power by plugging the device back into the power source. 4.
Attempt the setup process again following the provided
instructions. 5. If you still encounter difficulties, refer to the
Frequently Asked Questions (FAQ) section for detailed instructions.
Visit the following link for access:
https://www.orvibo.com/en/support/supportFaqs.html
6. For further technical support, please contact our customer
support team at [email protected]. They will provide assistance
in resolving any technical issues you may have encountered.
You can integrate this device into any Matter ecosystem you prefer for
controlling by its App or setting up routines with other matter devices. How
to Set Up : A Matter-supported controller and smart home app of the same
ecosystem are required. 1. Turn on Bluetooth on your phone. 2. Open the smart
home app and scan the access QR code provided in the initial settings or
“Setting – Add to App – Matters App” on the screen of MixPad D1. 3. Follow the
instructions in the app to complete setup. Note: Setup processes may vary
between different ecosystems.
Failed to Set Up? 1. Try to connect your phone to a stable 2.4GHz Wi-Fi
network with internet access instead of a 5GHz network; 2. Turn off, then turn
on the power to restart the device; 3. Refer to the FAQ for detailed
instructions: https://www.orvibo.com/en/support/supportFaqs.html
4. For technical support, contact: [email protected]