MACKIE MC-50BT Wireless Headphones with Wide Band Active Noise Cancelling User Guide
- June 9, 2024
- Mackie
Table of Contents
MACKIE MC-50BT Wireless Headphones with Wide Band Active Noise Cancelling
Important Safety Instructions
-
Read, follow, and keep these instructions. Heed all warnings.
-
Do not use in or near dangerous environments. This includes driving, cycling, walking, jogging and other areas where traffic is present and accidents could occur.
-
Keep this product and its accessories out of reach of children. Handling or use by children may pose a risk of death or serious injury.
Contains small parts and cords that may pose a risk of choking or strangulation. -
Set the volume level of the audio device to a minimum, and then, after connecting the earphones, adjust the volume gradually. Sudden exposure to loud noises could cause hearing damage.
-
Keep headphones clean. To clean the headphones, wash outside with a mild detergent solution.
-
Do not attempt to modify this product. Doing so could result in personal injury and/or product failure.
-
Do not immerse in water, such as while taking a shower, bath, or washing your face. Otherwise, sound deterioration or failures may result.
-
Do not use while sleeping as accidents may result.
-
Use a slow twisting motion to remove the earphones. Never pull on the earphone cord.
-
Stop using the earphones immediately if they are causing great discomfort, irritation, rash, discharge, or any other uncomfortable reaction.
-
If you are currently receiving ear treatment, consult your physician before using this device.
-
Operating Temperature: 5–45˚ C // 41–113˚ F (Charging) • -5–55˚ C // 23–131˚ F (Discharging).
-
This device complies with Part 15 of the FCC Rules [and contains license-exempt transmitter(s)/receiver(s) that comply with Innovation,
Science and Economic Development Canada’s license-exempt RSS(s)]. Operation is subject to the following two conditions: -
this device may not cause harmful interference, and
-
this device must accept any interference received, including interference that may cause undesired operation.
-
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The portable device is designed to meet the requirements for exposure to radio waves established by the ISED. These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard during product certification.
-
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Changes or modifications to this device not expressly approved by LOUD Audio, LLC. could void the user’s authority to operate the equipment under FCC rules.
Canada ICES-003(B)/NMB-003(B)
-
RF Power: ≤20dBm
Bluetooth frequency range: 2400~2483.5 MHz -
Exposure to extremely high noise levels may cause permanent hearing loss. Individuals vary considerably in susceptibility to noise-induced hearing loss, but nearly everyone will lose some hearing if exposed to sufficiently intense noise for a period of time. The U.S. Government’s Occupational Safety and Health Administration (OSHA) has specified the permissible noise level exposures shown in the chart. According to OSHA, any exposure in excess of these permissible limits could result in some hearing loss.
-
High sound pressure. Hearing damage risk.
Do not listen at high volume levels for long periods.
NOTE ON STATIC ELECTRICITY
Static electricity accumulated in the body may cause mild tingling in your ears. To minimize the effect, wear clothes made from natural materials. -
WARNING — The battery (battery or batteries or battery pack) shall not be exposed to excessive heat such as sunshine, fire or the like.
-
CAUTION — Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
-
CAUTION — A battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas.
-
Correct disposal of this product: This symbol indicates that this product should not be disposed of with your household waste, according to the WEEE directive (2012/19/EU) and your national law. This product should be handed over to an authorized collection site for recycling waste electrical and electronic equipment (EEE). Improper handling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the effective usage of natural resources. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, waste authority, or your household waste disposal service.
MC-50BT and MC-60BT Wireless Headphones with Wide-Band Active Noise Cancelling
Descriptions
-
USB C Connector This connector is used for charging the unit.
-
Power / Bluetooth The power button turns the MC-50BT and MC-60BT
on and off. Press and hold to pair with a Bluetooth device when powering on. [MC-50BT] Double-tap to enter ambient mode. -
ANC Turns the ANC on and off.
[MC-60BT] Press to filter through ANC, Ambient & Off modes. -
Status LED This LED indicates the status of the unit, including power,
battery level, device pairing and more. -
1/8″ Input Jack [MC-60BT] This jack allows for a wired connection.
-
Right Earcup Swipe, tap and/or hold the right earcup to pause/play, answer/end phone calls, go the previous/next track, raise/lower the volume and more.
-
Left Earcup [MC-60BT] Place the left earcup on the included charging pad for wireless charging.
Getting Started
- Read and understand the Important Safety Instructions on page 2.
- Connect a smartphone, tablet or computer to the MC-50BT / MC- 60BT via Bluetooth. The Bluetooth connection may disconnect when affected by electrostatic discharge (ESD) or electrical fast transients (EFT). If this occurs, manually reconnect the Bluetooth connection.
- Your ears are important to us! Be careful of permanent hearing damage. Lower the volume on your device. Even intermediate levels may be painfully loud. Always turn the volume all the way down before connecting the headphones or doing anything new that may affect the headphone volume. Then turn it up slowly as you listen carefully.
- Place the headphones over your ears. The power button is located on the left (MC-60BT) and right (MC-50BT) headphone.
- Raise the volume on your device up to a comfortably loud listening level and enjoy!
- Refer to the owner’s manual for specific button functionality.
Applications
- **Conference Call
**
- **Traveling
**
- **Walking / Running / Working Out
**
- **Gaming
**
Technical Specifications
| MODEL | MC- 50BT | MC- 60BT |
|---|---|---|
| Driver Type | 40 mm | |
| Frequency Response | 10 Hz – 24 kHz | 5 Hz – 26 kHz |
| Maximum Input Power | **** |
200mW
Bluetooth| 5.0
Bluetooth Profiles| V1.7, HSP V1.2, SPP V1.2, DID V1.3, HOGP V1.0, PXP
V1.0.1, FMP V1.0, BAS V1.0| HFP V1.6, HSP V1.2, A2DP V1.2, AVRCP V1.0, PBAP,
SPP, OPP, GOEP, FTP, HID
Bluetooth Audio Codec| AAC, SBC| AAC, MP3, SBC, AAC+, Faststream, APTX,
APTX HD
Bluetooth Range| 10m / 33′
ANC Type| Mackie MIS™ Wide-band
Working Time
| 40 hours (music) • 34 hours (music and ANC on)
| 32 hours (music) • 30 hours (music and ANC on)
Charging Time| £3 hours
£
| £3 hours (USB-C) • £5 hours (wireless)
Charging Input Voltage| ****
5V
Wireless charging| –| DC 5V, ³2A
Battery Technology| ****
850mAh
Size (H x W x D) Dimensions (HxLxP)| 1.9 x 7.7 x 6.8 in
48 x 196 x 173 mm
| 2.1 x 7.9 x 7.2 in
53 x 201 x 183 mm
Weight| 0.5 lb • 0.2 kg| 0.6 lb • 0.3 kg
WARRANTY AND SUPPORT
Visit WWW.MACKIE.COM to:
-
Identify WARRANTY coverage provided in your local market.
Please keep your sales receipt in a safe place. -
Retrieve a full-version, printable OWNER’S MANUAL for your product.
-
DOWNLOAD software, firmware and drivers for your product (if applicable).
-
REGISTER your product.
-
CONTACT Technical Support.
19820 NORTH CREEK PARKWAY #201 • BOTHELL, WA 98011 • USA Phone: 425.487.4333 • Toll-free: 800.898.3211 • Fax: 425.487.4337
Part No. 2055284 Rev. B 07/22 ©2022 LOUD Audio, LLC. All Rights Reserved.
Hereby, Loud Audio, LLC declares that the radio equipment type [MC-50BT/MC-
60BT] is in compliance with Directive 2014/53/EU. The full text of the EU
declaration of conformity and Bluetooth conformity are available at the
following internet address:
https://mackie.com/en/support/drivers-downloads?folderID=27309
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>