lytmi HSA20R LED Controller User Manual
- June 8, 2024
- lytmi
Table of Contents
lytmi HSA20R LED Controller
What’s in the box?
Introduction
Lytmi Neo HDMI 2.0 TV backlight is controlled by Neo HDMI2.0 sync box standard
edition, which is capable to detect the relevant RGBIC and virtually put them
into the algorithm to have the automatic calculation to reproduce the colors.
The lighting break the limited screen, bringing color and rhythm in front otf
you. What s more, it supports additional lighting synchronization except the
TV backlight, Creating and an ecosystem for your personal home theatre.
Sync Box Features
installation
- Clean the surface to ensure it’s dustless and dry
- Stick the strip lights to the back of the TV. Press them firmly and then reinforce them with the provided clips.
- Connect the HDMI cables and the light strip into the sync box.
Quick calibration on sync mode
- Check if the LED will match the color (in below picture) under sync mode initially, if not, please re-select the LED direction.
- You can also complete the calibration via the phone APP.
Control the Ligh
- Control via the sync box
- Make sure your WIFl is under 2.4Ghz; Turn on Bluetooth and GPS/ location on your phone.
- On the APP, register and log in. The APP will detect the
- HDMI2.0 Sync Box SE” automatically. Tap and add it.
Control via smart assistance
- Voice supported
- Log in your voice assistant account. After the light set up is finished, you can oontrol the light stripS and the various modes using voice Commands.
- After the set up is finished you can start to enjoy watching moves,
- TV shows and playing Computer Games. Use the App or Voice
- Commands to change modes and the colour & intensity of the lighting
notice
- Neo HDMI2.0 sync box standard edition supports up to 4K/60FPS sources.
- If there is any problem or failure in connection you can reset Neo to restore it to factory settings and start over.
- We recommend to keep Neo in a dry and ventilated place and away from wet or humid environment.
- It is normal for Neo to get warm after few hours usage.
- The light stirp cannot be cut. Please unplug Neo if it is not being used.
Specification
Troubleshooting
Cannot use sync mode
- Make sure you have connected the sync box with external HDMI input device. therwise, the sync mode cannot be used.
- Make sure the indicator is under the sync mode.
Cannot connect with the APP
- 5GHz Wi-Fi is not supported. Make sure the WIFI is under 2.4GHz, and make sure the GPS, Bluetooth are turned on; Make sure your Internet is available.
- Check if the WIFl indicator flashes slowly for connection
- If all the above conditions are met and still cannot be connected, please reset the sync box and try again.
The strip light does not light up/ Some LED cannot light up
- Check all wired connections. Ensure the strip light is well plugged into the Type-C LED port before powered on.
- Please select other Scene mode on the APP to check if the light strip can all light up.
If you have any questions about the device or something is unfounded in the package, feel free to contact our support team with your order number. Our email: support@ilytmi.com
Customer Service
Warranty:
- 12-Month Limited Warranty
Support: Lifetime Technical Support Email: support@ilytmi.com Offhcial website: www.ilytmi.com
This device complies with part 15 of the
FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>