joie VEKZL15 Mimzy Recline Highchair Instruction Manual

joie VEKZL15 Mimzy Recline Highchair

Instruction

Welcome to Joie™ Congratulations on becoming part of the Joie family! We are so excited to be part of your life with your little one. While using with the Joie mimzy™ recline, you are using a high quality, fully certified high chair, approved to European safety standards EN 14988:2017+A1:2020 and EN 12790:2009. When using as reclined cradle, the maximum weight is 9kg (6 months approximately). When using as highchair, the suitable age is 6-36 months. Please carefully read this manual and follow each step to ensure a pleasant experience and best protection for your child.

IMPORTANT! READ CAREFULLY AND KEEP FOR FUTURE REFERENCE

Emergency In case of emergency or accident, it is most important to have your child taken care of with first aid and medical treatment immediately

Parts List

Make sure all parts are available before assembly. If any part is missing please contact your local distributor. No tools are required for assembly.

1. Frame
2. Tray
3. Tray Cover
4. Tray Insert
5. Seat
6. Tray Horn
7. Backrest
8. Tray cover
9. Tray
10. Tray Horn
11. Seat Pad
12. Front Leg
13. Calf Support
14. Footrest
15. Rear Leg
16. Fold Button
17. Height Adjustment Button
18. 5-point Buckle
19. Small Insert
20. Front Support Leg
21. Rear Support Leg

WARNINGS

• Adult assembly is required.
• Never leave the child unattended.
• Always use the restraint system.
• Falling hazard: Prevent your child from climbing on the product.
• DO NOT use the product unless all components are correctly fitted and adjusted.
• DO NOT use the product if any parts are broken, torn or missing.
• Do not use accessories or replacement parts other than those approved by the manufacturer.
• Be aware of the risk of open fires and other sources of strong heat in the vicinity of the product.
• Be aware of the risk of tilting when your child can push its feet against a table or any other structure.
• Keep children away when unfolding and folding the product to avoid injury.
• When using as highchair, the product is intended for children able to sit up unaided and up to 3 years or a maximum weight of 15 kg.
• DO NOT use the highchair until the child can sit up unaided.
• When using as reclined cradle, the maximum weight is 9kg (6 months approximately).
• Do not use the reclined cradle once your child can sit unaided.
• It is dangerous to use this reclined cradle on an elevated surface, e.g. a table.
• This reclined cradle is not intended for prolonged periods of sleeping.
• This reclined cradle does not replace a cot or a bed. Should your child need to sleep, then it should be placed in a suitable cot or bed.
• Secure your child at all times with the restraint system provided, either in the reclining or upright position. The tray is not designed to hold your child in the product.
• DO NOT allow children to play with or around highchair while occupied.
• Always use on a flat and level floor.
• Regularly check the locks and fittings for security.
• Regularly inspect the product for damaged hardware, loose joints, missing parts or sharp edges.
• It is recommended the use of the most reclined position for new born baby

Highchair Assembly

Please read all the instructions in this manual before assembling and using this product.

Assemble Support Leg

1.  Assemble the front support leg to the front leg. An audible “click” means the front support leg is secured to the Front Leg
2. Assemble the rear support leg to the rear leg . An audible “click” means the rear support leg is secured to the rear leg.
3. Open Frame Rotate rear leg back until an audible “click” is heard.

Assemble Seat

1. Open the seat.
2. Fit the seat onto the frame . An audible “click” means the seat is secured to the frame.
   • Lift the seat up to be sure it is locked into place.

Assemble Seat Pad Assemble the seat pad by following these steps:

1. Open the seat.
2. Insert the two-seat pad anchor through openings in seat back.
   • Please make sure the seat pad anchor are secured to the seat back to prevent the seat pad from slipping.
3. Pull all the harnesses through the slots in seat pad.
   • Wrap the seat pad over the top of seat back.

Highchair Operation

Adjust Calf Support

1. The calf support has 2 position settings.
2. Press the adjustment buttons on both sides of the seat and rotate the calf support downward or upward.

Adjust Footrest

1. The footrest can be adjusted to 3 positions.
2. To adjust the footrest, remove the footrest from the calf support, choose a desired position, and then reinsert the footrest into the calf support.

Use Buckle

Note

1. To prevent serious injury or death from falling or sliding out, always secure child in the restraint.
2. Make sure the restraint harness is fitted correctly and the space between the harness and the child does not exceed the thickness of an adult hand.
3. DO NOT cross the shoulder belts. This will cause pressure on child’s neck.
4. Lock Buckle
5. Match the waist belt buckle up with the shoulder buckle and slide together. Insert buckles into the center buckle. A “click” means the buckle is locked completely. Repeat for other side.
6. Release Buckle Press the center button to release the buckles.

Adjust Height for Shoulder Harnesses

Note

1. The shoulder harness must go into the slot that is even with or slightly above the shoulders.
2. In order to protect your child from falling out, after your child is placed into the seat, check whether the shoulder harnesses are at proper height.
3. For larger child, use the upper shoulder slots. For smaller child, use the lower shoulder slots.

Choose a pair of proper shoulder slots. Insert the shoulder harnesses into slots in seat pad and seat back. 16 17 When changing shoulder harness slots, make sure shoulder harnesses are going through same slots in seat pad and seat back.

Adjust Length for Harnesses

1. Use slide adjuster to change the harness length.
2. Pull waist harness to tighten to proper length. Press the button to loosen the waist harness.

Use Tray Assemble Tray

1. Fit the crotch restraint and tray mount onto the tray by pushing into the opening on the tray bottom until you hear a “click” sound.
2. Both the crotch restraint and tray mount can only be assembled in one direction. The slots on the crotch restraint and tray mount attachment should be aligned with the ribs in the opening of the tray bottom.
3. Insert the tray guides into the holes in the seat, slide forward until a “click” is heard. To remove tray, squeeze the button under the tray and slide off.
   • The tray horn must be inserted into tray before use. Once the tray horn is inserted, do not attempt to remove it.
   • Use caution when adjusting tray, as the tray can be completely removed from the seat.

Tray Adjustment

1. The tray has 3 positions. The distance between your child and tray can be adjusted as needed.
2. Squeeze the button under the tray and move the tray until a desired position is reached, and then release the button. If the tray is not automatically locked in the holes, move the tray until a “click” is heard. 23
   • Ensure both sides of tray are in matching positions.
   • Pull the tray towards you to ensure both guides are secure.

Tray Storage

1. When the tray is not in use, It can be stored on the rear legs.
2. Place the tray over the rear legs and snap the tray guides into place.
3. The stored tray is shown in.

Use Tray Cover

1. To attach the tray cover, place it over the tray and push down until tab snaps into place.
2. To remove the tray cover, grasp the tab near the seating area and pull up, then lift the tray cover upwards.

Adjust Height for Seat

1. DO NOT adjust the height of the seat with child in it.  There are 7 height positions. The seat can be adjusted to the proper height according to the height of
   your dinner table, which makes it more convenient for your child to have meals together with family.

2. To adjust height, squeeze the height adjustment buttons on both sides of the chair, and lower or raise seat to a desired position.

Adjust Recline

1. DO NOT adjust the seat recline with child in it. There are 5 recline positions. The seat can be used as a reclined cradle when the recline is on the fifth position.

2. Squeeze button on the back of seat  and push down or pull up to adjust the seat back to a desired recline position. Fold Highchair

   • DO NOT fold the highchair with child in it.
     Fold the highchair by following these steps:

   • Remove tray before folding the highchair.

   • For most compact storage, lower the seat to the lowest position and adjust the calf support to horizontal or flat position.

   • Fold the seat.

   • Fold the frame.

   • Store the tray on the rear legs.

Detach Seat Pad

1. Release the 5-point buckle.
2. Pull harnesses through the back of seat pad.
3. Remove the two seat pad anchor from the seat back to detach the seat pad.

Small Insert Assembly If need to use small insert, please assemble it as.

Tray Insert The tray insert can be used together with the tray. It can also remain attached when the tray is stored. When placed on the dinner table, the tray insert can be used as a serving tray. To attach the tray insert, place it over the tray and push down until the tab snaps into place.

Care and Maintenance

• The tray cover and tray insert are dishwasher safe.
• Your seat pad can be spot cleaned with a sponge and soapy water. DO NOT use bleach.
• Drip dry the washed seat pad. DO NOT put in dryer.
• To clean the frame, wipe with a damp cloth and mild detergent then wipe out any traces of moisture on the frame with a dry cloth.
• DO NOT use undiluted neutral detergent, gasoline or another organic solvent to wash the highchair. It may cause damage to the highchair.
• From time to time, check your highchair for worn parts, torn material or stitching. Replace the parts as needed.
• If the highchair is not in use for a long period of time, please put it somewhere your child cannot access it.

References

• Baby Gear That Goes Above & Beyond | Joie

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>