ARDESTO HC-Y22-B Hair Clipper Instruction Manual

ARDESTO HC-Y22-B Hair Clipper

Congratulations on the purchase of your new appliance. You have clearly decided in favour of a quality product. These operating instructions are a part of this product. They contain important information in regard to safety, use and disposal. Before using the product, familiarise yourself with all of these operating and safety instructions. Use the product only as described and only for the specified areas of application. In addition, pass these documents on, together with the product, to any future owner. Save the device packaging for future use, as it contains important information. All images in the instruction manual are for reference only. The actual device may vary slightly.

INTENDED USE

These hair clipper are intended exclusively for the cutting and trimming of hair in domestic households. This appliance is not intended for use in commercial/industrial applications. Usage other than as described here is not permitted and may cause damage or injury. For damage resulting from misuse or improper handling, the use of force or unauthorized modification, no liability will be assumed.

Safety instructions

• This device can be used by children over 8 years of age and persons with limited physical and mental or sensory abilities or with a lack of experience and knowledge if they are under constant supervision or instructed in the safe use of the device and they understand the possible dangers.
• Children should be supervised to ensure that they do not play with the appliance.
• Cleaning and service should not be carried out by children without supervision.
• Use only the original accessory parts for this device.
• Check the cutting head for proper function before using the appliance.
• Never use the appliance with a damaged or broken attachment comb. The absence of teeth on the attachment comb can lead to injury.
• Switch the appliance off before you put it down.

To avoid the risk of an electric shock:

• Connect the plug of switching adaptor only to correctly installed and earthed mains sockets that are easily accessible. Ensure that the rating of the local power supply tallies completely with the details given on the rating plate of the device.
• The device should only be used with the power supply unit (charging adapter) which corresponds to the characteristics of the device.
• Do not use the appliance in the close vicinity of a bath/shower or a sink filled with water. The proximity of moisture presents a danger, even when the appliance is switched off.
• The device must only be supplied with safety extra-low voltage in accordance with the markings on the device.
• Never submerse the appliance in water or other liquids.
• Should the appliance be dropped into water, absolutely disconnect the plug from the mains socket before extracting the appliance.
• After use or when cleaning it, always remove the plug of switching adaptor from the mains power socket. Do not pull on the cable of switching adaptor directly, pull the plug.
• The appliance is suitable for use only in dry areas.
• Attention! Keep the appliance dry.
• Do not use the unit while the human is being bathed or when the hair is wet.

DELIVERY SET

• Hair clipper x 1 pc
• Adjustable attachment comb x 1 pc
• Cleaning brush x 1 pc
• Oil bottle x 1 pc
• Instruction manual (warranty card is included) x 1 pc

DEVICE PRODUCTION DATE
The production date is indicated on the device itself (in the serial number) after «S/N», in the format: MMYYYYXXXXXXXXX, where MM is the month of production, YYYY is the year of production.

TECHNICAL DATA

• Power: Li-ion battery 3,7V, 700 mAh (non-removable)
• Input : 5.0V DC, 1000 mA
• Operating temperature : +5°C – +40°C
• Storage temperature : 0°C – +40°C

DESCRIPTION OF THE APPLIANCE

Appliance

1. 6 settings adjustable comb attachment
2. Detachable blade set
3. Body
4. ON/OFF button
5. LED light indicator

ATTACHED

OPERATION

For best cutting performance the hair to be cut must be dry and clean.

• Before the first use and if the device continuously operates for 30 minutes the detachable blade set should be oiled with some drops of oil in the five positions of the blade set. For this, use the supplied blade oil
• For this operation take the attachment comb, if fitted, off and take out the detachable blade set (see illustrations below):
• Insert the comb attachment on the device until the attachment has clicked into its place then choose the desired length of cutting hair. Press the fixing button on the adjustable comb attachment and move it while the white indicator point on the comb attachment is opposite the desired length of cutting:
• Start with the largest position cutting length first. And, if necessary, use a position shorter one.
• Switch the appliance on by pressing the ON/OFF button (“ON” position). We recommend to trim a small area first to familiarize yourself with the attachment comb.
• Hold the clipper against the hair, the teeth of the clipper guide must be pointing upwards yet flat against the head.
• Move the device upwards and out wards through the hair, a little at a time, against the direction of hair growth.
• The device will work most efficiently when cutting through the hair at its own speed. Never force the device through the hair.
• Never turn off the device while it is in the cutting hair.
• For longer hair on top of the head, use the long-adjusted comb and lift hair on top of the head, cutting over the comb, or hold the hair between the fingers and cut to the desired length.
• Always work from the front to the back of the head.

To outline

• Do not attach the adjustable attachment comb.
• Hold the clipper upside down and holding it gently against the skin at the length desired, move downward.

Having defined the outline, gently hold the clipper against the skin, the teeth of the clipper must be pointing upwards and move the device upwards against the direction of hair growth to the defined outline. This will trim the unwanted hair adjacent to the outline

CHARGING

The LED indicator of the device has symbols that indicate the level of charging: 25%, 50% and 100%. If the indicator shows 25% and symbol of battery is blinking, it means that the device needs to be charged (see the illustration below): The best environmental temperature for charging is between 15°C and 35°C.

• Connect the supplied USB cable or other USB cable with USB-C connector to an AC adapter (not included). You can use adapters with output: 5V (only) and 1A (or larger).
• Turn off the clipper and connect the cable to the device. Then connect the adapter to an electrical outlet.
• The battery symbol will be blinking while the device is charging. If the indicator shows 100% and the battery symbol is off, the device is fully charged.

The device can be used for cutting hair while charging. Please use the device connected to the outlet not more than 30 minutes to avoid damage of the adapter.

CLEANING AND CARE

WARNING! Risk of electric shock!
Before cleaning, turn off the device and put off the charging cable from the device. Never submerse the device in water or other liquids

• Take the attachment comb, if fitted, off.
• Take off the detachable blade set.
• Using exclusively the cleaning brush, remove the hair from the cutting head. The cutting head may not be cleaned with water or other liquids, except medical alcohol!
• If in regular use, the cutting head should be oiled. For this, use the supplied blade oil.
• Remove excess oil with a dry cloth.
• Clean the housing with a soft, dry lint-free cloth.
• Store the appliance in a dry and dust free location.

DISPOSAL
Do not dispose of the device in your normal domestic waste. Dispose of the appliance over a registered waste disposal firm or at your local community waste disposal facility. Observe the currently applicable regulations. In case of doubt, please contact your waste disposal center. Dispose of all packaging materials in an environmentally friendly manner. The manufacturer reserves the right to make changes to the technical specification

Warranty conditions

The plant guarantees normal operation of the product within 12 months from the date of the sale, provided that the consumer complies with the rules of operation and care provided by this Manual. Service life of the product is 5 years. In order to avoid any misunderstanding we kindly ask you to carefully study the Owner’s Manual, the terms of warranty, and check the correctness of filling the Warranty Card. The Warranty Card is valid only if the following information is correctly and clearly stated: model, serial number of the product, date of sale, clear seals of the company-seller, signature of the buyer. The model and serial number of the product must correspond to those specified in the Warranty Card. If these terms are violated, and if the information specified in the Warranty Card is changed, erased or rewritten, the Warranty Card is considered invalid. Setup and installation (assembly, connection, etc.) of the appliance are described in the attached documentation; they can be carried out both by the user, and by specialists having the necessary qualification sent by USC or selling companies (on a paid basis).

In this case, the person (the institution) installing the appliance shall be responsible for the correctness and quality of installation (setup). Please pay attention to the importance of the correct installation of the appliance, both for its reliable operation, and for obtaining warranty and free service. Require the installation specialist to enter all the necessary information about the installation in the Warranty Card. In case of failure of the appliance during the warranty period by the fault of the manufacturer, the owner is entitled to free warranty repair upon presentation of the correctly filled Warranty Card together with the appliance in the factory configuration packed in the original packaging to the warranty workshop or the place of its purchase. Satisfaction of the customer’s claim due to the fault of the manufacturer shall be made in accordance with the law «On Protection of Consumers

WARRANTY CARD
Dear Buyer! Congratulations on your purchase of the ARDESTO brand appliance, which was designed and manufactured in accordance with the highest quality standards, and we thank you for choosing this particular instrument. We ask you to keep the coupon during the warranty period. When purchasing a product, require a full warranty card.

1. Warranty service is carried out only if there is a correctly and clearly filled original warranty card, which indicates: product model, date of sale, serial number, warranty service period, and the seller’s seal. *
2. The service life of household appliances is 5 years.
3. The product is intended for consumer use. When using the product in commercial activities, the seller / manufacturer does not bear warranty obligations, after-sales service is performed on a paid basis.
4. Warranty repair is carried out within the period specified in the warranty card for the product in an authorized service center on the conditions and terms determined by applicable law.
5. The product is withdrawn from the warranty in case of violation by the consumer of the operating rules set forth in the instruction manual.
6. The product is removed from warranty service in the following cases:
7. misuse and non-consumer use;
8. mechanical damage;
9. damage caused by the ingress of foreign objects, substances, liquids, insects;
10. damage caused by natural disasters (rain, wind, lightning, etc.), fire, domestic factors (excessive humidity, dust, aggressive environment, etc.)
11. damage caused by non-compliance of power and cable network parameters with state standards and other similar factors;
12. when operating equipment in the power supply network with a missing single ground loop;
13. in case of violation of seals installed on the product;
14. lack of serial number of the device, or inability to identify it.
15. The warranty does not cover consumables and accessories, as well as filters, shelves, drawers, stands and other containers for storing products.
16. The warranty period is 12 months from the date of sale.

Tear-off maintenance tickets are provided by an authorized service center The completeness of the product is checked. I have read the terms of the warranty service, no complaints. Customer Signature

• Product information
• Product
• Model
• Serial number
• Seller Information
• Trade organization name
• The address
• Date of sale
• Seller stamp

Coupon

Seller stamp

• Date of the application
• Cause of damage
• Date of completion

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>