Aladdin AD-ALL-WDIM All-In Controller with Lumenradio and DMX User Manual

October 29, 2023
ALADDiN

Aladdin AD-ALL-WDIM All-In Controller with Lumenradio and DMX

Aladdin-AD-ALL-WDIM-All-In-Controller-with-Lumenradio-and-DMX-
PRODUCT

THANK YOU FOR YOUR PURCHASE

START-UP GUIDE

Aladdin-AD-ALL-WDIM-All-In-Controller-with-Lumenradio-
and-DMX-FIG-1

1 Buttons for principal functions
2 DMX IN/OUT (5-pin)
3 Output to panel
4 LED display
5 Power input socket (D-Tap or AC Adapter)
6 F1 – Dial with push button for multiple functions
7 F2 – Dial with push button for multiple functions
8 F3 – Dial with push button for multiple functions

Primary Functions

Black out Press F1 for 3 seconds
Reset all panels Press F2 for 3 seconds
Unlink Lumenradio Press F3 for 3 seconds
Dial accuracy selection Press any dial shortly
Bi-Color mode Press WHITE
RGB mode Press RGB
HSI mode Press HSI
Filter mode Press FILTER
Effect mode Press EFFECT
Lock / Unlock Press any button for 3 seconds

Secondary Functions

Controls in BI-COLOR mode

F1 Controls intensity
F2 Controls color temperature
F3 Controls green and magenta (+ / -)

Controls in RGB mode

F1 Controls intensity of red
F2 Controls intensity of green
F3 Controls intensity of blue

Controls in HSI mode

F1 Controls hue from 0 – 360°
F2 Controls saturation
F3 Controls intensity

Controls in FILTER mode

F1 Turn dial for filter selection, press to select
F2 Turn dial for slot selection, press to save settings
F3 Turn dial for load slot selection, press to load

Controls in EFFECT mode

F1 Turn dial to select effect, press to select
F2 Turn dial to control effect speed (from 50%-100%)
F3 Turn dial to control effect intensity

Controls in DMX mode


F1

| Turn dial to select between CABLE and LUMENRADIO, press to select
---|---
F2| Set DMX channel from 10 to 510
F3| Set DMX channel from 1 to 9
Unlink Lumenradio| Press F3 for 3 seconds

IMPORTANT CAUTIONS AND WARNINGS
  • Do not use near flammables and heaters.
  • Do not expose the unit to direct sunlight for a long period (applies also for storing in a car).
  • Do not damage the product with improper force or cause any impact with heavy objects.
  • Keep out of reach of children.
  • Use the product only within temperature range of -10°C – +40°C.
  • When you have technical problems while using the product, stop using it immediately and contact your dealer / reseller.

ADDITIONAL NOTES

  • When the unit is connected to the panel, it is not possible to access the panel via bluetooth (mobile app). Therefore please remove the unit to have full access via app.

WARRANTY

  • We provide a one year warranty period after the purchase.
  • This warranty covers repairs or a replacement for faulty products within this period.
  • After this warranty has been expired, you can still get repairs for your product which will be charged extra.
  • Aladdin Lights reserves the right to refuse warranty service on products under disputable conditions.

WARRANTY EXCLUSIONS

  • In case of any of the below listed causes, the warranty does not apply, even if it is within the free warranty period.
  • Product failure due to consumer negligence.
  • Product failure due to usage of not compatible power sources.
  • Product failure due to disassembly by not official resellers/distributors.

TECHNICAL SPECIFICATIONS

Article code ALL-WDIM
Compatibility ALL-IN-ONE, ALL-IN TWO
Dimmer Dimming: (0.5%–100%)
Cooling Passive cooling
Dimensions 160mm (W) x 50mm (H) x 40mm (D)
Weight 140g
Temperature range -10°C – +40°C
DMX512 support IN&OUT (5-pin) / Lumenradio
DMX512 2 Channels – White Bi-Color / 3 channels RGB
Dimming range 0.5% – 100%
Temperature range 2900K – 6100K
IP-Rating 24

Documents / Resources

| Aladdin AD-ALL-WDIM All-In Controller with Lumenradio and DMX [pdf] User Manual
AD-ALL-WDIM All-In Controller with Lumenradio and DMX, AD-ALL-WDIM, All-In Controller with Lumenradio and DMX, All-In Controller, Controller
---|---

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals