ARDESTO HD-С100 Hot Air Styler Instruction Manual
- June 9, 2024
- ARDESTO
Table of Contents
HD-С100 Hot Air Styler
Instruction Manual
IMPORTANT SAFETY INSTRUCTIONS
When using electrical appliances, it is necessary observe the following precautions:
-
Read the manual before using or cleaning the appliance.
-
Do not leave children unattended near the electrical appliance.
-
Avoid getting water or any liquid on the electrical appliance, as well as the power cord and plug.
WARNING! Do not use the device near bathtubs, showers, swimming pools or other basins containing water. -
Keep the power cable away from sharp edges and hot surfaces.
-
Do not use a damaged electrical appliance, or an electrical appliance with a damaged power cord or plug. Do not attempt to repair the device yourself.
-
In case of malfunctions, contact an authorized service center.
-
If the power cord is damaged, it must be replaced by the manufacturer, service center or similarly qualified personnel in order to avoid a hazard.
-
Always unplug the appliance from the outlet if it will not be used for a long time or before cleaning.
-
When connecting or disconnecting the device from the outlet, hold the plug, never pull on the power cable.
-
Do not cover the electrical equipment with metal structures or clothing, as this may cause the equipment to overheat.
-
While using the device, keep your hair away from the air inlets.
-
Do not block the air intake or outlet areas during use. Blocking the air flow can result in overheating which may cause burns or mechanical damage. Rolling too large a bunch of hair around the brush will not allow proper curling and also block the air outlet.
-
For additional protection, it is recommended to install a protective disconnection device (PPE) with a rated tripping current not exceeding 30 mA in the bathroom power circuit; during installation, you should consult a specialist.
-
Do not leave the device switched on unattended.
-
Use only those accessories that are recommended by the manufacturer.
-
This appliance can be used by children aged 8 years and over and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
Children should not play with the device. Cleaning and user maintenance should not be performed by unsupervised children. -
Use the device only for domestic purposes compliance with this Instruction Manual.
-
Use indoors only.
-
Before putting the appliance away for long-term storage or before cleaning, disconnect it from the mains and let the appliance cool down.
-
Do not touch the hot surfaces of the device.
-
Allow the appliance to cool completely before packing.
-
Do not use the device to style synthetic wigs.
EQUIPMENT
Hot air styler – 1 pc.
Styling brush with diameter 40 mm – 1 pc.
Styling brush with diameter 50 mm – 1 pc.
Instruction manual (includes warranty card) – 1 pc.
DESCRIPTION
- Styling brush with diameter 40 mm2.
- Styling brush with diameter 50 mm
- Brush removing button
- Rotation switch
- Fan setting switch
- 360° swivel cord
HOW TO USE
Caution: always ensure the Fan setting switch (5) is set to OFF position before plugging the device to the power outlet.
-
Choose the Styling brush 40 mm (1) for smaller curls or 50 mm (2) for larger curls.
• Fitting the brush: push the Brush removing button (3) above the brush and place the chosen brush into the device until you hear a click.
• Removing the brush: push the Brush removing button (3) above the brush and remove the brush from its recess.
Reminder: the styling brush is getting hot when in use. Be careful when removing it. -
Plug the device to the power outlet.
-
Adjust the desired blowing strength using the Fan setting switch (5):
0 – OFF Position
C – COOL BLOW Position
1 – Low Speed Position
2 – High Speed Position
4. Use the high setting for drying hair and low setting for styling.
Brush Rotation Function
This function enables you to automatically wind the section of hair around the
brush to easy blow dry and style your hair effortlessly.
- To start rotation, press the rotation switch (4) in the desired direction of rotation (clockwise or counter clockwise).
- Keep pressing the switch while blow drying.
- To stop rotation, release the rotation switch (4).
Notes:
• Do not apply hair oils or lotions directly to the brush or comb.
Only indirect contact with hair is allowed.
• If the air intake becomes blocked during use, the thermal switch may shut down the device. Turn off the hot air styler, let the device to cool down for a while and continue operation.
• Always ensure the switch is set to OFF position before plugging the unit in the power outlet.
CLEANING AND CARE
IMPORTANT! Before cleaning, unplug the device and let it cool down
completely.
WARNING! Never immerse the device in water and always ensure that plug is
kept dry.
- Wipe the body of device with a slightly damp cloth or sponge.
- Do not use abrasive cleaning agents.
- It is recommended after some time of use to disassemble the air inlet and clean it. To do this, remove the brush, then press the air intake grill, then slide it to the left until it comes out of the device. After cleaning is complete, insert the air intake grill into the top of the hair dryer and move it to the right until it locks into the correct position.
STORAGE
- Allow the hot air styler to cool completely and make sure the body is completely dry.
- To avoid damaging the cable, do not wind it around the hot air styler or brushes.
- Store the hair dryer in a cool, dry place.
- Do not store the device near cosmetics as they may deform the hot air styler and brushes.
CORRECT DISPOSAL OF THIS PRODUCT
This marking indicates that this product should not be disposed with other
household wastes throughout the EU. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources. To return
your used device, please use the return and collection systems or contact the
retailer where the product was purchased. They can take this product for
environmentally safe recycling.
The manufacturer reserves the right to change the characteristics of devices
that do not affect the operational quality indicators, without prior notice.
DEVICE PRODUCTION DATE
The production date is indicated on the device itself (in the serial number)
after «S/N», in the format: MMYYYYXXXXXXXXXX, where MM is the month of
production, YYYY is the year of production.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>