VONROC WL504AC Foldable Work Light Instructions
- June 9, 2024
- VONROC
Table of Contents
VONROC WL504AC Foldable Work Light Instructions
SAFETY INSTRUCTIONS
Read the enclosed safety warnings, the additional safety warnings and the instructions. Failure to follow the safety warnings and the instructions may result in electric shock, fi re and/or serious injury. Save the safety warnings and the instructions for future reference. The following symbols are used in the user manual or on the product:
Read the user manual.
Denotes risk of personal injury, loss of life or damage to the tool in case of non-observance of the instructions in this manual.
Risk of electric shock.
Not suitable for applications with external dimmers.
Minimal distance between the light source and illuminated objects.
Protection class IP65.
Replace damaged glass covers.
Do not dispose of the product in unsuitable containers.
The product is in accordance with the applicable safety standards in the European directives.
SAFETY WARNINGS FOR WORK LIGHT
a) Please read and observe all safety warnings and instructions enclosed
with the work light.
b) Do not use the work light in hazardous areas.
c) Do not direct the light beam at persons or animals and do not stare
into the light beam yourself (not even from a distance).
d) Do not cover off the lens while operating the work light. The work
light heats up during operation and can cause burns when the heat is allowed
to accumulate.
e) Do not allow children to use the work light. It is intended for
professional use. Children can unintentionally blind themselves or other
persons.
MACHINE INFORMATION
Intended use
The foldable work light is intended as mobile illumination for temporary use
and is not suitable for permanent room lighting.
TECHNICAL SPECIFICATIONS
| Model No. | WL504AC | WL505AC | WL506AC |
|---|---|---|---|
| Input | 220-240V~ 50Hz | ||
| Power | 30W | 50W | 100W |
| Luminous flux | 2700lm | 4500lm | 9000lm |
| Beam angle | 120° | ||
| CRI | >80 | ||
| Ingress protection | IP65 | ||
| Weight | 1.2kg | 1.5kg | 2.4kg |
DESCRIPTION
The numbers in the text refer to the diagrams on
- LED light
- Locking knobs
OPERATION
Be sure to keep a minimal distance of 0.5m between the lights (1) and any illuminated objects. Objects that are placed too closely may overheat.
Do not connect the work light to external dimmers of any kind. The work light is not suitable for use in combination with external dimmers. Using an external dimmer can cause irreparable damage to the work light and/or the dimmer circuit. Only connect the work light to a regular 220-240V~ 50Hz outlet.
Unfolding / Adjustment (Fig. D)
To unfold the work light, or to adjust the orientation of the work light, take
the following steps:
- Slightly loosen the locking knobs (2).
- Adjust the light (1) to the desired orientation.
- Re-tighten the locking knobs (2).
MAINTENANCE
The work light is maintenance-free and only requires occasional exterior cleaning.
Do not open the housing of the lights, there is a risk of electric shock. The work light does not contain any serviceable parts. Malfunctioning lights must be disposed of.
Replace the lights in case the glass covers become damaged. Damaged lights can not be repaired and must be disposed of.
The LED light source is not replaceable. When the LED light source has reached the end of its life the light must be disposed of.
Cleaning
Disconnect the work light from mains power and allow it to cool down suffi
ciently before cleaning. Do not use any solvents, caustic cleaning products or
similar chemicals. Use a dry or damp cloth for cleaning.
ENVIRONMENT
Faulty and/or discarded electrical or electronic apparatus have to be collected at the appropriate recycling locations.
Only for EC countries
Do not dispose of power tools into domestic waste. According to the European
Guideline 2012/19/EC for Waste Electrical and Electronic Equipment and its
implementation into national right, power tools that are no longer usable must
be collected separately and disposed of in an environmentally friendly way
WARRANTY
VONROC products are developed to the highest quality standards and are guaranteed free of defects in both materials and workmanship for the period lawfully stipulated starting from the date of original purchase. Should the product develop any failure during this period due to defective material and/or workmanship then contact VONROC directly.
The following circumstances are excluded from this guarantee:
- Repairs and or alterations have been made or attempted to the machine by unauthorized service centers;
- Normal wear and tear;
- The tool has been abused, misused or improperly maintained;
- Non-original spare parts have been used.
This constitutes the sole warranty made by company either expressed or implied. There are no other warranties expressed or implied which extend beyond the face hereof, herein, including the implied warranties of merchantability and fi tness for a particular purpose. In no event shall VONROC be liable for any incidental or consequential damages. The dealers remedies shall be limited to repair or replacement of nonconforming units or parts.
The product and the user manual are subject to change. Specifi cations can be changed without further notice.
Documents / Resources
|
VONROC WL504AC Foldable Work
Light
[pdf] Instructions
WL504AC, WL505AC, WL506AC, WL504AC Foldable Work Light, Foldable Work Light,
Work Light, Light
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>