JTact E12 Wireless Earbuds User Manual
- June 9, 2024
- JTact
Table of Contents
E12 Wireless Earbuds
User Manual User Manual
E12 Wireless Earbuds
Manual before operating your device In order to avoid unnecessary injuries, please do not Disassemble this product by yourself, and please use a standard charger.
Product Contains
Product
Specification
Driver: 13mm
Support Profile: HFP / AVRCP / A2DP
Earbuds ChargingTime: Up to 1.5 H。ur
Charging case Charging Time: Up t。1.5 Hours
Working Voltage: SV
Transmission Range: Up to lOm
Working Temperature: -30º -70º
PowerOn/off
- Earbuds will auto power on and connect when you open the charging case.
- Earbuds will auto power off and disconnect when you close the charging case.
- If charging case open but earbuds don’t power on, please charging the case and earbuds.
Bluetooth Pairing
When you use earbuds first time, please connect your cellphone/laptop first.
Open the charging case and check the charging case green light flash to make
sure earbuds is opened.
Tum on the Bluetooth page on your cellphone or laptop and open Bluetooth
function and select “El2” to connect the device.
The device will automatically turn off if not connected cellphone within 5
minutes
Reset Earbuds
If only one earbud connects to phone I earbuds can not pair together. Please
try the reset steps:
Step 1: Open the charging case and check the charging case green/red light
flash.
Step 2: Keep the earbuds in charging case and long press the reset button to
reset.
Step 3: When the white light on, which means reset successfully.
Product Wear
Step l. Take
out the earbuds from charging case.
Step2: Hang the earbuds on your ears.
Step3. Adjust by twisting the earbuds for comfort and secure.
Product Control
| Answer a Call
Short press the touch button twice
---|---
| End a Call
Short press the touch button twice
| Reject Call
Long press the touch button for 2 seconds
| Voice Assistant
Short press the touch button thrice to call voice assistant(Short press the
touch button once to leave.)
| Play/Pause
Short pressthetouch button twice
| Previous Song
Long press Left touch button for 2 seconds
| Next Song
Long press Right touch button for 2 seconds
| Volume Up
Short press Righttouch button once
| Volume Down
Short press Left touch button once
Product Charging
- Put the earbuds back charging case to charging earbuds.
- Plug the USB type-C to charging the charging case.
- Confirm the red indicator light on, and the green light will light on when fully charged.
Warranty
The warranty covers your device, including accessories against manufacturing defects for 1 year from the date of purchase.
Extended Warranty
For your better consumer experience, we provide you with an extended warranty.
Please scan the following QR code:
https://accountsi-cxk.com/register-order
Technical Support
If you encounter any issues while using our products, please feel free to contact us via following email address. Our experienced customer support representative will get back to you, and provide technical support. Support@i-cxk.com
Certification
“This device corn plies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.” FCC ID: 2A7GB-E12
Safety For You
| Do not expose device to liquids, moisture or humidity. It has electronics
and a battery in it. Neither of them likes getting wet.
---|---
| Don’ t use abrasive cleaning solvents to clean your device. Wipe them down
with a slightly damp cloth if and when necessary.
| Remove and clean the earbuds tips regularly, to ensure that you always enjoy
the best sound possible from your device.
| Do not expose device to extremely high or low temperatures as this may
damage the battery or even deform the plastic parts.
| Don’ t throw yours device in a fire to dispose it. The internal battery may
explode.
| Don’ t try to disassemble your device. There are no user serviceable parts
inside it.
| Try not to drop your device and keep it away from sharp objects such as keys
in your pockets.
| Only charge your device from 5V USE, ports such as phone chargers and
laptops or PCs.
| Never listen to music at high volumes or you may permanently damage your
hearing.
| Pay attention to your surroundings and never wear any headphones while
riding, driving or walking in traffic You do not come with any warranty.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.