ANKER 556 USB-C Hub Multiport Adapter User Manual

: June 9, 2024
: Anker

Table of Contents

At a Glance
Specifications
Important Safety Instructions
Customer Service
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ANKER 556 USB-C Hub Multiport Adapter

At a Glance

Item	Description
1. USB-C Port (Connects to Host)	Connects to a laptop.
2. Power Indicator	Turns white when connected to a laptop.

Flashes white once every second when upgrading firmware.

3. USB-C 3.2 Gen 2 Port| 10 Gbps data transfer.
4. USB-A 3.2 Gen 2 Port| 10 Gbps data transfer.

5. HDMI Port

| Up to 8K@30Hz output to a single display when connected to a laptop.

6. DisplayPort

| Up to 8K@30Hz output to a single display when connected to a laptop.
7. Ethernet Port| Connect to a router or modem at 10/100/1000 Mbps.

8. PD-IN

|

Connect to a Power Delivery charger to charge a connected laptop or tablet.
Supports up to 100W input.

Specifications

Data Speed

data transfer rate

|

10 Gbps

---|---
HDMI / DisplayPort| Single Display:

For single display use: HDMI: Up to 8K@30Hz HDMI: maximum 8K (30Hz)

Dual Display
When using two displays DisplayPort: Up to 4K (60Hz) DisplayPort: maximum4K (60Hz)

Supported Operating Systems

correspondence OS

| Windows 10/11, macOS 12 and above

Windows 10/11、macOS 12 from

Important Safety Instructions

Avoid dropping.
Do not disassemble
Do not expose to liquids
For the safest and fastest charge, use original or certified cables
This product is suitable for moderate climates only
The maximum ambient temperature when using this product must not exceed 95°F / 35°C.
Open flame sources, such as candles, must not be placed near this product.
Only use a dry cloth or brush to clean this product.

Declaration of Conformity

Hereby, Anker Innovations Limited declares that this product is in compliance with Directives 2014/30/EU & 2011/65/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.anker.com.
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong
The following importer is the responsible party contract for EU matters:
Anker Innovations Deutschland GmbH
Georg-Muche-Strasse 3, 80807 Munich, Germany

Declaration of Conformity

Hereby, Anker Innovations Limited declares that this product is in compliance with the following Directives:
The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012 & Electromagnetic Compatibility Regulations 2016.
The full text of the GB declaration of conformity is available at the following internet address: https://www.anker.com.
The following importer is the responsible party contract for UK matters: Anker Technology (UK) Ltd GNR8, 49 Clarendon Road, Watford, Hertfordshire, WD17 1HP, United Kingdom

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Warning: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
The following importer is the responsible party contract for FCC matters: Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764 Telephone: +1-800-988-7973

IC Statement

This device complies with Industry Canada license-ICES-003. Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.

This symbol indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.

The Adopted Trademarks HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.