ECG VT 3620 2in1 Jean Wireless Vacuum Cleaner Instruction Manual

VT 3620 2in1 Jean/VT 3630 2in1 Alan
Wireless Vacuum Cleaner
Instruction Manual

• Always read the safety & use instructions carefully before using your appliance for the first time. The user´s manual must be always included.

DESCRIPTION

A Handle
B Battery capacity indicator
C Body of the vacuum cleaner
C1 Charging connector
C2 Ventilation opening
C3 Dust container
C4 Dust container release button
C5 Main switch
C6 Operating mode switch
D Suction tube release button| E Suction tube (aluminum or telescopic – depending on the model)
F Motorized floor brush
F1 Wheels
F2 Floor brush cover
F3 LED diode
F4 Hook for hanging the body
F5 Release button
F6 Removable fine dust brush
J Batteries
---|---

Accessories (may vary depending on model purchased)
G Spare brush (roller)
H 2 in 1 combined nozzle
I Holder for attaching the vacuum cleaner to the wall
L1 Small motorized turbo brush
L2 Smooth roller + spare brush (roller)
L3 Cleaning brush for maintenance of floor brushes
K Charging adapter

SAFETY INSTRUCTIONS

Read carefully and save for future use!
Warning: The safety measures and instructions, contained in this manual, do not include all conditions and situations possible. The user must understand that common sense, caution and care are factors that cannot be integrated into any product. Therefore, these factors shall be ensured by the user/s using and operating this appliance. We are not liable for damages caused during shipping, by incorrect use, voltage fluctuation or the modification or adjustment of any part of the appliance.
To protect against a risk of fire or electric shock, basic precautions shall be taken while using electrical appliances, including the following:

1. Read all instructions before using the appliance.

2. Make sure that the voltage in your socket corresponds to the voltage on the appliance label and that the socket is properly grounded. The outlet must be installed in accordance with applicable electrical codes according to EN.

3. Do not use the charging adapter if it shows signs of damage. All repairs, including cord replacements, must be carried out at a professional service centre! Do not remove the protective covers from the appliance; there is a risk of electric shock!

4. Protect the appliance from direct contact with water and other liquids and neither place containers with liquids to it to avoid possible electric shock.

5. The hand-held vacuum cleaner is only partially charged after purchase and must therefore be fully charged before use by inserting it into the charging holder. Never use the vacuum cleaner without a filter.

6. Do not use the vacuum cleaner outdoors or in a damp environment. Do not touch the vacuum cleaner or the charging holder with wet hands. Risk of electric shock.

7. Do not allow children to play with the vacuum cleaner. A vacuum cleaner is not a toy. Be more attentive if you are using the vacuum cleaner near children.

8. Use only with the supplied adapter, charger, attachment and accessories that have been approved by the manufacturer.

9. If the vacuum cleaner is not working properly; the vacuum cleaner has fallen (e.g. falling into water); if it is damaged or left outside, have it professionally inspected by an authorized service center.

10. Keep the handheld vacuum cleaner and the battery at a sufficient distance from heat sources, do not use the vacuum cleaner connected to the charging holder, and pull the power cord from the mains socket.

11. Never pull the plug of the charging holder from the outlet by pulling the cable. Unplug the cable from the outlet by grasping the plug.

12. Do not insert any objects into the vacuum cleaner openings. Do not use the vacuum cleaner if the openings are blocked in any way. Make sure that the vacuum cleaner is clean, without dirt and any debris, which can reduce the suction power of the vacuum cleaner.

13. Keep hair, loose clothing, hands and other parts of the body away from openings or moving parts of the vacuum cleaner.

14. Do not used the tapered nozzle close to eyes and ears! Use extra care when cleaning stairs.

15. Do not vacuum sharp objects like glass, screws, coins, nails, etc.

16. Do not vacuum hot or shouldering materials like embers, cigarettes or other burning objects.

17. When used excessively or in extreme temperatures the batteries can leak. If the fluid comes into contact with your skin, wash immediately the affected area with soap and water or neutralize with a soft acid such as lemon juice or vinegar. If the fluid gets into your eyes, immediately rinse them out with clean water as soon as possible and seek medical help.

18. Only use the vacuum cleaner in accordance with the instructions in this manual. This vacuum cleaner is designed for home use only.
    The manufacturer is not liable for damages caused by the improper use of this appliance.

19. This appliance can be used by children aged 8 years and older and people with lower physical or mental abilities or lack of experience and knowledge, if they are supervised or have been instructed to use the product in a safe manner and understand the potential dangers. Children shall not play with the appliance. Cleaning and maintenance performed by the user should not be done by children unless they are older than 8 years and under supervision.

20. Children under the age of 8 must stay out of reach of the appliance and its power supply.

Only use the adapter supplied with the vacuum cleaner for recharging!

BATTERY CHARGING

The vacuum cleaner allows 2 charging methods:

• After inserting the battery into the appliance (we recommend this charging method because the LED indicator on the appliance shows the charging status).
• Direct battery charging

ASSEMBLY

Installation of aluminum suction tube
Insert the end of the aluminum alloy tube into the suction hole of the vacuum cleaner body horizontally (see the picture below). Make sure the tube fits snugly in the hole. You can tell if the tube is correctly inserted by an audible click.If you want to pull the tube out, press the release button and pull the tube out.

Installation of motorized floor brush

• Insert the motorized brush into the snap connection of the suction tube (see picture 1). You can tell by an audible click that it is correctly inserted.
• If you want to pull the brush out, press the release button and pull the brush out. (see picture 2)

2 in 1 combined nozzle
The combined nozzle is suitable for cleaning small surfaces, crevices or irregular objects, such as corners, window slits, internal parts of appliances, drawers, keyboards, etc.

CONTROL

1. Preparation
   Make sure the battery is sufficiently charged before use. We recommend charging the battery for at least 6 hours before first use.

2. Start
   Start the vacuum cleaner by pressing the main switch. Press again to turn off the vacuum cleaner.

3. Switching operating modes
   The default mode of the vacuum cleaner is low speed mode, press the C6 button once to switch to high speed mode. Press again to return to low speed mode.

4. Empty the dust container and clean the filter
   We recommend emptying the dust container after each use. The filter set inside is washable and recyclable.
   Just wash the filter set under running water and put it back on after it has dried perfectly.
   

Combination nozzle 2 in 1 and small motorised turbo brush
These attachments are suitable for cleaning small, narrow or irregular surfaces such as corners, windowsills, appliance interiors, drawers, keyboards, etc.
These accessories may not be included – depending on the model purchased.

MAINTENANCE AND CLEANING

We recommend regular maintenance to maximize performance and extend the life of your vacuum cleaner.
Maintenance of the vacuum cleaner body

• Switch off the vacuum cleaner before cleaning.

• Clean parts of the vacuum cleaner with water or a neutral detergent, avoid electrical parts and contacts.
  Before cleaning, make sure the cloth is wrung out and prevent water from entering the interior of the vacuum cleaner.

• After cleaning, do not place the appliance in direct sunlight or in damp places.

Dust container and filter
The dust container is transparent. Please pay close attention to how much dust is in the container and how clogged the filter is. Regular cleaning ensures product’s  performance.
Cleaning of the dust container
The MAX line is marked on the container, which indicates the maximum capacity of the vacuumed dust.
As soon as the amount dust comes close or reaches the MAX mark, empty the container immediately. We recommend removing the suction tube and other components for easier cleaning.
Cleaning of the removable brush for fine dust
Find the lock on the left side of the floor brush and open it. Pull out the brush and remove any trapped hair or lint using the scissors or cleaning brush included in the package.

Cleaning the filter
To maintain the best performance of the appliance, we recommend cleaning the filter every week and rinse it at least once a month and let it dry completely. Tips: 6 steps to clean your set of filters

1. Open the dust container lid by pressing the button.
2. Turn the filter cover counterclockwise and pull it out downwards.
3. Turn the filter insert counterclockwise and separate it from the container.
4. Wash the filter cover and filter insert under running water.
5. Attach the filter cartridge to the dust container by turning it clockwise (make sure the filter cartridge is thoroughly dry before putting it back in).
6. Attach the filter cover to the dust container by turning it clockwise (also make sure the cover is thoroughly dry).

Cleaning the motorized floor brush
We recommend cleaning the brush after each use.

1. Turn off power
2. Remove the motorized floor brush.
3. Pull the removable rotating brush out of the brush.
4. Clean all parts from dirt and any trapped hair, animal hair.
5. Place the rotary brush back into the floor brush.

Using the cleaning brush
The sharp end can be used to cut off hair caught in the rotary brush. The opposite end is used for cleaning the dust container, filter insert or suction tube.

Signaling on the indicator

• The power indicator shows the remaining battery capacity when the main switch is pressed.
• The indicator flashes when the remaining capacity is less than 5%. Charge the vacuum cleaner in time to avoid battery damage.
• If the battery is inserted in the vacuum cleaner during charging, the indicator shows the charging progress.
• Do not use the vacuum cleaner during charging!

Storage
The vacuum cleaner allows for two storage methods:

• Mounting on a wall holder.
  

• Attaching the body to the tube and placing it on the floor.
  

TROUBLESHOOTING

cleaner according to the instructions.
Check for blockage by a foreign object.| Remove the foreign object from the tube or brush.
The filter is too dirty.| Pull out the filter and check it. Gently tap the filter cover and filter insert to remove dust and dirt, and if they are still too dirty, rinse them with water. Make sure the filter set is thoroughly dry before reassembly. It is recommended to wash the
filter set at least once a month to maintain a good suction performance of the vacuum cleaner.
The motor makes a strange sound.| The main suction hole or suction tube is blocked.| 1.Clean the suction hole and tube.
2.If this does not help, contact an authorized service.
The brush does not rotate.| The brush is clogged with hair or animal hair.| Remove the trapped hair or animal hair.
Problems with charging| Check if the vacuum cleaner is assembled correctly.| Follow the instructions when installing the machines battery and motor. Make sure that the battery is properly inserted into the motor.
Charging does not work. The charging adapter has failed.| Contact an authorized service center.
The vacuum cleaner does not work even when fully charged.| Check if the vacuum cleaner is assembled correctly and if the battery is inserted correctly. If the vacuum cleaner still does not work, contact an authorized service center.
The vacuum cleaner is too hot during charging.| Allow the vacuum cleaner cool down and repeat charging. If there is no improvement, contact an authorized service center.

TECHNICAL SPECIFICATIONS

power output: 27 V, 500 mA
Protection class| Class II

USE AND DISPOSAL OF WASTE
Wrapping paper and corrugated paperboard – deliver to scrapyard. Packing foil, PE bags, plastic elements – throw into plastic recycling containers.
DISPOSAL OF PRODUCTS AT THE END OF LIFETIME
Disposal of electric and electronic equipment (valid in EU member countries and other European countries with an implemented recycling system)
The represented symbol on the product or package means the product shall not be treated as domestic waste.
Hand over the product to the specified location for recycling electric and electronic equipment. Prevent negative impacts on human health and the environment by properly  recycling your product. Recycling contributes to preserving natural resources. For more information on the recycling of this product, refer to your local authority, domestic  waste processing organization or store, where you purchased the product.
This product complies with EU directives on electromagnetic compatibility and electrical safety.
The operating manual is available on internet at www.ecg- electro.eu.
Changes of text and technical parameters reserved.

References

• Educatief - Jumbo
• ECG - My way of home
• ECG - My way of home

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>