TRIPP-LITE U442-DOCK14-MS USB C Dock with 4K HDMI USB Hub and Gigabit Ethernet for Microsoft Surface Owner’s Manual
- June 4, 2024
- Tripp Lite
Table of Contents
Owner’s Manual
USB-C Dock with 4K HDMI, USB Hub and Gigabit Ethernet for Microsoft ® Surface
Model: U442-DOCK14-MS
Product Features
- Adds 4K HDMI, USB-C and USB-A ports, Gigabit Ethernet and 100W PD 3.0 charging to your Surface tablet
- Supports HDMI resolutions up to 3840 x 2160 @ 30 Hz
- USB hub ports include two USB 3.2 Gen 2 (10 Gbps) ports and one USB 2.0 port
- Adjustable bracket clamps to the rear of select Microsoft Surface devices. See Compatible Models for details.
- Connect to a wired Gigabit Ethernet network via the RJ45 port
- USB-C PD 3.0 port supports 20V 5A (100W) power output for charging host Surface and 10 Gbps for connecting a peripheral
- Plug-and-play–no software or drivers are required to operate
Package Contents
- U442-DOCK14-MS USB-C Dock for Microsoft Surface
- Owner’s Manual
Optional Accessories:
- N201-Series Cat6 Gigabit Snagless Patch Cables
- P569-Series High-Speed HDMI Cables
- U322-Series USB 3.2 Gen 1 USB-A to USB-B Device Cables
- U420-Series USB 3.2 Gen 1 USB-C Cables
- U428-Series USB 3.2 Gen 1 USB-A to USB-C Cables
- M100-Series USB Sync/Charge Cable – USB-A to Lightning
Product Overview
- USB-C (Male) Input Connector: Connect to the USB-C port on a Microsoft Surface device
- USB-C Data/PD 3.0 Port (Female): Provides up to 100W (20V 5A) of power via PD 3.0 charging to the Surface, or capable of USB 3.2 Gen 2 (10 Gbps) data transfer rates
- HDMI Port (Female): Connect a 4K HDMI monitor
- USB 3.2 Gen 2 Ports (x2, Female): Connect up to two USB 3.2 peripherals
- USB 2.0 Port (Female): Connect a USB 2.0 peripheral, such as a mouse or keyboard
- RJ45 Port (Female): Connect to a wired Ethernet network
Installation
Notes:
- This product supports video resolutions up to 4K (3840 x 2160) @ 30 Hz. If your display is unable to transmit video from the dock, refer to the Troubleshooting section of this manual for details.
- The dock is compatible with any Microsoft Surface device with a USB-C port. The rear clamp is adjustable and can adjust to any compatible Surface device.
-
Secure the U442-DOCK14-MS unit to the rear of your Microsoft Surface unit via the flexible securing clamps on either end of the dock.
-
Connect the dock’s USB-C male input connector to the USB-C port on your Microsoft Surface device.
-
Connect a USB-C peripheral device to the USB-C Data/ PD 3.0 port.
OR Charge the Surface device by connecting its USB-C PD Charger to the docking station’s USB-C PD Charging port for up to 100W (20V 5A) of charging power. -
Connect up to two USB peripheral devices such as hard drives, smartphones and tablets to the USB 3.2 Gen 2 ports.
-
Connect a mouse or keyboard to the USB 2.0 port.
-
Connect to a wired Ethernet network at speeds up to 10/100/1000 Mbps (Gigabit) via the RJ45 port.
-
Transmit 4K video to a connected display via the HDMI port.
Compatible Models
The U442-DOCK14-MS can be clamped to the back of any Microsoft Surface device with a USB-C port and a width of 12 inches or less, including the following models:
- Surface GO
- Surface GO 2
- Surface GO 3
- Surface Pro 7
- Surface Pro 8
- Surface Pro X
The U442-DOCK14-MS also functions as a desktop docking station with all other Surface devices with a USB-C port, but cannot be clamped to them.
Specifications
Input Connector
USB-C| USB Type-C (Male)
Output Connector(s)
USB-C| USB Type-C Data/PD 3.0 Charging (x1 Female)
USB-A| USB 3.2 Gen 2 (10 Gbps) (x2 Female); USB 2.0 (x1 Female)
Ethernet| RJ45 (x1 Female)
Video| HDMI (x1 Female)
Environmental
Operating Temperature Range| 41° to 95°F (5° to 35°C)
Storage Temperature Range| 14° to 122°F (-10° to 50°C)
Relative Humidity| 20% to 80% RH
Mechanical
Unit Dimensions [H x W x D]| 1.29 x 9.17 x 1.26 in. (33 x 233 x 32 mm)
Cable Length| 11.8 in. (300 mm)
Unit Weight| 0.35 lb. (0.16 kg)
Specifications|
HDMI Specification| 2.0
HDCP Specification| 2.3, 1.4
Maximum Supported Video Resolution| 4K (3840 x 2160) @ 30 Hz
Network Speed| 10/100/1000 Mbps or 1 Gbps
PD Charging Specification| PD 3.0 (100W)
Data Specification| USB 3.2 Gen 2 (10 Gbps); USB 2.0 (480 Mbps)
Operating Systems Supported| Windows 8, 10, 11
Warranty and Product Registration
1-Year Limited Warranty
Seller warrants this product, if used in accordance with all applicable
instructions, to be free from original defects in material and workmanship for
a period of one (1) year from the date of initial purchase. If the product
should prove defective in material or workmanship within that period, Seller
will repair or replace the product, at its sole discretion.
THIS WARRANTY DOES NOT APPLY TO NORMAL WEAR OR TO DAMAGE RESULTING FROM
ACCIDENT, MISUSE, ABUSE OR NEGLECT. SELLER MAKES NO EXPRESS WARRANTIES OTHER
THAN THE WARRANTY EXPRESSLY SET FORTH HEREIN. EXCEPT TO THE EXTENT PROHIBITED
BY APPLICABLE LAW, ALL IMPLIED WARRANTIES, INCLUDING ALL WARRANTIES OF
MERCHANTABILITY OR FITNESS, ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET
FORTH ABOVE; AND THIS WARRANTY EXPRESSLY EXCLUDES ALL INCIDENTAL AND
CONSEQUENTIAL DAMAGES. (Some states do not allow limitations on how long an
implied warranty lasts, and some states do not allow the exclusion or
limitation of incidental or consequential damages, so the above limitations or
exclusions may not apply to you. This warranty gives you specific legal
rights, and you may have other rights which vary from jurisdiction to
jurisdiction.)
WARNING: The individual user should take care to determine prior to use
whether this device is suitable, adequate or safe for the use intended. Since
individual applications are subject to great variation, the manufacturer makes
no representation or warranty as to the suitability or fitness of these
devices for any specific application
PRODUCT REGISTRATION
Visit tripplite.com/warranty today to register your new Tripp Lite product.
You’ll be automatically entered into a drawing for a chance to win a FREE
Tripp Lite product!
No purchase necessary. Void where prohibited. Some restrictions apply. See the website for details.
FCC Notice, Class B
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications to this equipment not expressly approved by Tripp Lite could void the user’s authority to operate this equipment.
WEEE Compliance Information for Tripp Lite Customers and Recyclers
(European Union)
Under the Waste Electrical and Electronic Equipment (WEEE) Directive and
implementing regulations, when customers buy new electrical and electronic
equipment from Tripp Lite they are entitled to:
- Send old equipment for recycling on a one-for-one, like-for-like basis (this varies depending on the country)
- Send the new equipment back for recycling when this ultimately becomes waste
Use of this equipment in life support applications where the failure of this equipment can reasonably be expected to cause the failure of the life support equipment or to significantly affect its safety or effectiveness is not recommended. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice. Photos and illustrations may differ slightly from actual products.
1111 W. 35th Street, Chicago, IL 60609 USA •
tripplite.com/support
22-01-368 9340A3_RevB
WARRANTY REGISTRATION
Register your product today and be automatically entered to win an ISOBAR ®
surge protector in our monthly drawing! tripplite.com/warranty
Copyright © 2022 Tripp Lite. All rights reserved.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>