Electronic 7885 X-Maxx LED Light Bar Kit Instruction Manual

June 9, 2024
Electronic

Electronic 7885 X-Maxx LED Light Bar Kit Instruction Manual

Electronic 7885 X-Maxx LED Light Bar Kit Instruction
Manual

Kit Contents:

  • High-Voltage Power Amplifier*
  • 3x12mm button-head screws (2)
  • Front LED light bar*
  • 3x8mm cap-head screws (2)
  • Rear LED light bar mount*
  • 3x10mm flat-head screws (2)
  • Rear LED light bar*
  • 3x8mm button-head screws (2)
  • Extension harness (long)*
  • Extension harness (short)*
  • 3x10mm button-head screws (2)
  • Zip ties (10)

Tools needed

(all not included and sold separately):

  • Tapered body reamer (part #3433 or #3433X)
  • 1.5mm hex wrench
  • 2.0mm hex wrench
  • 2.5mm hex wrench

Compatible with the following Traxxas electronic speed controls (sold separately): Velineon® VXL-6s (part #3485) Velineon® VXL-8s (part #3496)

⚠ CAUTION: RISK OF INJURY! Use care with hobby knives, tapered reamers, and other cutting tools as they are
extremely sharp and can cause severe injury, deep cuts, and/or punctures.

Electronic 7885 X-Maxx LED Light Bar Kit Instruction Manual - BODY UNDERSIDE
VIEW

Electronic 7885 X-Maxx LED Light Bar Kit Instruction Manual - Install the
included template on the truck body

XRTTM Body Modification
Using a tapered body reamer, carefully cut a small 8mm hole in the truck body. The hole needs to be large enough for the rear light bar harness connectors to pass through (note the hole diameter measurements on the body reamer).

Electronic 7885 X-Maxx LED Light Bar Kit Instruction Manual - Part
list

Electronic 7885 X-Maxx LED Light Bar Kit Instruction Manual - Install the
high-voltage power amplifier on the truck chassis

Install the high-voltage power amplifier on the truck chassis. Ensure that the connectors on the amplifier face the front of the vehicle. Secure with the 3x12mm button-head screws.

Electronic 7885 X-Maxx LED Light Bar Kit Instruction Manual - Remove the
3x25mm button head screws

⚠ CAUTION: RISK OF DAMAGE TO ELECTRONICS! To prevent damage to the electronic speed control (ESC) and/or the high-voltage power amplifier, ensure the battery is disconnected before plugging the amplifier into the ESC.

Electronic 7885 X-Maxx LED Light Bar Kit Instruction Manual - How to
use

9 XRT Use the supplied zip ties to secure all wiring to the chassis.

Electronic 7885 X-Maxx LED Light Bar Kit Instruction Manual - Use the
supplied zip ties to secure all wiring to the chassis

Electronic 7885 X-Maxx LED Light Bar Kit Instruction Manual - How to
use

10 X-MAXX Use the supplied zip ties to secure all wiring to the chassis.

Electronic 7885 X-Maxx LED Light Bar Kit Instruction Manual - Use the
supplied zip ties to secure all wiring to the chassis

High-Voltage Power Amplifier Operation

The high-voltage power amplifier and lights will turn on when the ESC is powered on. Press the Mode Select button on the amplifier to toggle through the three lighting modes (Mode 1: Low Beam (default), Mode 2: High Beam, Mode 3: Daytime). The chart below indicates how the lights will function in each mode.

Electronic 7885 X-Maxx LED Light Bar Kit Instruction Manual - High-Voltage
Power Amplifier Operation

Change the high-voltage power amplifier settings and gain access to additional functions using the Traxxas Link App (available in the Apple App Store™ or on Google PlayTM). The TQi transmitter with the Traxxas Link Wireless Module (part #6511, sold separately) are required.
This device complies with FCC Part 15 & IC RSS-210 rules subject to the following conditions: (1) This device may not cause harmful interference, and (2) This device must accept all interference received, including interference that may cause undesired operation. App Store is a service mark of Apple Inc. Google Play is a trademark of Google Inc.

Replacement Parts

Part # Description
6590 High-Voltage Power Amplifier
7882 Extension harness, LED lights (high-voltage)
7883 LED light bar, rear, red (with white reverse light) (high-voltage) (24 red LEDs, 24 white LEDs, 100mm wide)/ light bar mount
7884 LED light bar, front (high-voltage) (40 white LEDs (double row), 82mm wide)

Warranty Information

Traxxas electronic components are warranted to be free from defects in materials and workmanship for a period of 30 days from the date of purchase.

Limitations: Any and all warranty coverage does not cover replacement of parts and components damaged by abuse, neglect, improper or unreasonable use, crash damage, water or excessive moisture, chemical damage, improper or infrequent maintenance, accident, unauthorized alteration or modification or items that are considered consumable. Traxxas will not pay for the cost of shipping or transportation of a defective component to us.

Traxxas Lifetime Electronics Warranty
After the expiration date of the warranty period, Traxxas will repair electronic components for a flat rate. Please visit Traxxas.com/support for a current schedule of warranty costs and fees. The covered repairs are limited to non-mechanical components that have NOT been subjected to abuse, misuse, or neglect. Products damaged by intentional abuse, misuse, or neglect may be subject to additional charges. Traxxas liability, in no case, shall be greater than the actual purchase price of this product. For replacement, product must be returned in brand new condition, with packaging and itemized sales receipt.

If you have questions or need technical assistance, call Traxxas at
1- 8 8 8 – T R A X X A S (1-888-872-9927) (U.S. residents only)

TRAXXAS.com
Traxxas, 6250 Traxxas Way, McKinney, TX 75070, Phone: 972-549-3000, Fax: 972-549-3011, e-mail: support@Traxxas.com

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Electronic User Manuals

Related Manuals