cell2 B12 LED Beacons User Manual
- June 9, 2024
- Cell2
Table of Contents
LED BEACON
User Manual
OPERATION
RED: To +VDC
BLACK: To Chassis Ground (-)
FLASH PATTERN SELECTION
-
Open
Twist the dome lens counter clockwise B , then lift the dome lens to open. -
Change
Momentarily push the red button to change to the next flash pattern. (see Flash Patterns Chart) -
Close
Twist the dome lens clockwise C to close, and ensure that it is tight.
WARNING: It is not recommended to use magnetically mounted warning
devices on outside of vehicle in motion. Usage is at the sole risk and
responsibility of the user. (For moving vehicles, please use Power Mags)
3 Bolt Mount
- Drill holes on the mounting surface for the wire-exit and mounting bolts.
- Secure the beacon onto the mounting surface with mounting bolts.
Magnetic Mount
| FP# | FLASH PATTERNS |
|---|---|
| 1 | 8 Flash |
| 2 | Single |
| 3 | Double |
| 4 | Triple |
| 5 | Quad |
Note: This unit may not be factory-set at FP#1
150714B12-1
Documents / Resources
|
cell2 B12 LED
Beacons
[pdf] User Manual
B12 LED Beacons, B12, LED Beacons, Beacons
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>