retro-bit BIG6 2.4GHz Wireless Arcade Pad Instruction Manual
- June 9, 2024
- retro-bit
Table of Contents
retro-bit BIG6 2.4GHz Wireless Arcade Pad
LAYOUT DIAGRAM
Includes controller, Micro USB® Cable for charging, Original Port & USB® Receivers, Deluxe storage case and instruction manual.
DEFAULT BUTTON MAPPING
Controller| SEGA
Genesis ®
| SEGA
Genesis ® Mini I & II
| Windows PC D-Input| Windows PC X-Input| Switch| NSO SEGA
Mode
| Classics Mode
---|---|---|---|---|---|---|---
D-Pad| D-Pad| D-Pad| D-Pad| Left Analog| D-Pad|
D-Pad| D-Pad
A| A| A| 2| 1| A| Y| Y
B| B| B| 3| 2| B| B| B
C| C| C| 5| Z –| ZR| A| A
X| X| X| 1| 3| X| L| L
Y| Y| Y| 4| 4| Y| X| R
Z| Z| Z| 6| Z +| ZL| R| X
L| –| –| 7| 5| L| ZL| ZL
R| –| –| 8| 6| R| ZR| ZR
Select| Mode| Menu| 9| 7| Minus –| Minus –|
Minus –
Start| Start| Start| 10| 8| Plus +| Plus +|
Plus +
Home| –| –| –| –| Home| Home| Home
Connection| V2
Genesis® Receiver
| V2 USB® Receiver
Macro Input| Mode| Description
Select + Start + R| Clear Pairings| Removes all pairings from the
controller. If you are experiencing battery drain issues, use this mode
when leaving the controller idle.
Start + A| NSO SEGA Mode| This will change the button mapping
(see mapping chart). USB Receiver only.
Start + B| Input Switch| This will change the input mode on the
controller and the LED will change color as well.
Start + C| Classics Mode| This will change the button mapping
(see mapping chart). USB Receiver only.
Start + Left| Left Analog| Changes the DPad to act as the left
analog stick (may not function in certain programs).
Start + Right| Right Analog| Changes the DPad to act as the right
analog stick (may not function in certain programs).
Start + Up| Dpad| Change the DPad to act as a DPad.
Start + Down| AB / XY Flip| Flips the A and B buttons and the X
and Y buttons.
FEATURES
- Includes SEGA Genesis® and USB® wireless receivers
- Retains the familiar grip and sleek design
- Additional Home, Select, and shoulder buttons
- Includes 3.3ft / 1m USB®-C charge cable
- Rechargeable 500mAh Li-ion battery
- Compatible with SEGA Genesis®/Mega Drive consoles via Genesis receiver
- Compatible with PC, Mac®, and other USB®-enabled devices via USB® receiver
- Up to 30ft / 10m gaming range
PAIRING
- Connect the appropriate receiver into the console’s controller port.
- Once connected, the LED on the receiver will blink to indicate it is in search mode.
- Press Start on the controller. The LED on the controller will blink as well.
- Press and hold the Sync button on the receiver.
- Release the Sync button once both the receiver and controller’s LED remain solid.
If you encounter an issue while pairing, you can reset the controller in one of two ways:
- Press and Hold Start + R for 4 seconds
- Inserting a thin metal wire (an unbent paperclip for example) into the small hole on the back of the controller. Gently press and hold until the LED stops glowing. Then restart the pairing process.
CHARGING
When the controller’s battery is low, plug the USB®-C charge cable into the controller and the USB® end into a powered charger or available port on a console. It is compatible with fast-charging plugs. The LED will remain lit when fully charged.
SEGA GENESIS®
- The controller’s LED will be red to indicate it is in 6-Button Mode and blue if it is in 3-Button mode. To switch between the two modes, press and hold Start + B until it changes color.
SEGA GENESIS® MINI
- If the LED on the controller is blue, press and hold Start + B until it changes to red. The controller will not function on the console if it is blue.
SEGA SATURN® (REQUIRES V2 SATURN RECEIVER)
- If the LED on the controller is blue, press and hold Start + B until it changes to red. The controller will not function on the console if it is blue.
SWITCH
- If the LED on the controller is blue, press and hold Start + B until it changes to red. The controller will not function on the Switch if it is blue.
- To set the DPad to Left Analog mode, press and hold Left + Start for 3 seconds
- To set the DPad to Right Analog mode, press and hold Right + Start for 3 seconds
- To set the DPad to back to normal, press and hold Up + Start for 3 seconds
- To flip the face buttons A/B & X/Y, press and hold Down + Start for 3 seconds
PC / ANDROID®
- The controller’s LED indicates the input mode it is in. To switch between the modes, press and hold Start + B until it changes color.
- Red indicates it is in D-Input mode.
- Blue indicates it is in X-Input mode.
MAC®
- If the LED on the controller is blue, press and hold Start + B until it changes to red. The controller will not function on the console if it is blue.
SUPPORT
To stay up to date with the latest news, manuals, and firmware updates, visit www.retro-bit.com/support.
FCC WARNING
RF exposure statement
This equipment complies with the FCC radiation exposure limits set forth for
an uncontrolled environment.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Customer Service
@retrobitgaming
For more information, please visit www.retro-bit.com
Retro-Bit is a registered trademark of Kool Brands, LLC. SEGA is registered in
the U.S. Patent and Trademark Office. SEGA, the SEGA logo and GENESIS are
either registered trademarks or trademarks of SEGA Holdings Co., Ltd. or its
affiliates. Mac is a registered trademark of Apple Inc. USB is a registered
trademark of Universal Serial Bus Implementers Forum, Inc. All other mentioned
trademarks are either trademarks or registered trademarks of their respective
owners. This product is licensed by SEGA of America, Inc.
© 2012 Kool Brands, LLC.
©SEGA