retro-bit RB-SGA-026 2.4 GHz Wireless Pro Controller Instruction Manual

2.4 GHz Wireless
Pro Controller INSTRUCTION MANUAL

LAYOUT DIAGRAM

Includes controller, USB-C® to USB® Cable for charging, Original Port & USB Receivers, and instruction manual.

DEFAULT BUTTON MAPPING

Controller| SEGA Saturn®| SEGA Genesis®
Mini I & II| Windows PC
D-Input| Windows PC X-Input| Switch| Flip A/B & X/Y| PS3
---|---|---|---|---|---|---|---
D-Pad| D-Pad| D-Pad| D-Pad| D-Pad| D-Pad| D-Pad| D-Pad
Left Analog| D-Pad| D-Pad| Left Analog| Left Analog| Left Analog| Left Analog| Left Analog
Right Analog| –| –| Right Analog| Right Analog| Right Analog| Right Analog| Right Analog
A| A| A| 3| 0| A| B| o Circle
B| B| B| 2| 1| B| A| x Cross
C| C| C| 5| 7| L| L| L1
X| X| X| 4| 2| X| Y| ♦ Triangle
Y| Y| Y| 1| 3| Y| X| ■ Square
Z| Z| Z| 6| 6| R| R| R1
I| L| –| 5| 7| L| L| L1
R| R| –| 6| 6| R| R| R1
ZL| L| –| 7| 4| ZL| a| L2
ZR| B| –| 8| 5| ZR| ZR| R2
LSC| –| –| 11| 10| LS| LS| L3
RSC| –| –| 12| 11| RS| RS| R3
Select| –| Menu| 9| 8| –| –| Select
Start| Start| Start| 10| 9| +| +| Start
Home| –| –| 13| 16| Home| Home| Home
Connection|

V2 Saturn® Receiver

Lights| LED1| LED1| LED1| LED1| LED4| LED2+4| LED1+2
Macro Input| Mode| Description
Start + Select + R| Clear Pairings| Removes all pairings from the controller. If you are experiencing battery drain issues, use this mode when leaving the controller idle.
Start + B (Saturn Only)| 3D Control Mode| This enables 3D Control Mode. Certain Saturn titles use this mode.
Start + B (PC Only)| Input Switch| This will change the input from D to X. Repeat to return to D Input.
Start + Left| Switch Default Layout| This will change the button mapping (see mapping chart). USB Receiver only.
Start + Down| Flip A/B and X/Y| This will change the button mapping (see mapping chart). USB Receiver only.

FEATURES

• Includes SEGA Saturn® and USB® wireless receivers
• Comes with a 3.3ft / 1m USB-C® charge cable
• Features dual Hall Effect analog sticks for durability and precision
• Dual analog rumble motors* incorporated in the controller
• Four shoulder buttons, Home, and Select buttons
• Rechargeable 500mAh Li-ion battery
• Compatible with SEGA Saturn® consoles via console receiver
• Compatible with PC, Mac®, and other USB®-enabled devices via USB® receiver
• Up to 30ft / 10m wireless range

PAIRING

• Connect the appropriate receiver into the console’s controller port.

• Once connected, the LED on the receiver will blink to indicate it is in search mode.

• Press Start on the controller. The LED on the controller will blink as well.

• Press and hold the Sync button on the receiver.

• Release the Sync button once both the receiver and controller’s LED remain solid.
  If you encounter an issue while pairing, you can reset the controller in one of two ways:

• Press and Hold Start + Select + R for 4 seconds

• Inserting a thin metal wire (an unbent paperclip for example) into the small hole on the back of the controller. Gently press and hold until the LED stops glowing. Then restart the pairing process.

CHARGING

When the controller’s battery is low, plug the USB®-C charge cable into the controller and the USB® end into a powered charger or available port on a console. It is compatible with fast-charging plugs. The LED will remain lit when fully charged.
SEGA GENESIS® (REQUIRES V2 GENESIS RECEIVER)

• The controller’s LED will be red to indicate it is in 6-Button Mode and blue if it is in 3-Button mode. To switch between the two modes, press and hold Start + B until it changes color.
  SEGA GENESIS® MINI

• If the LED on the controller is blue, press and hold Start + B until it changes to red. The controller will not function on the console if it is blue.
  SEGA SATURN®

• If the LED on the controller is red, it is in standard mode. To enable 3D Controls used by certain titles, press and hold Start + B until it changes to blue.
  SWITCH

• If the LED on the controller is blue, press and hold Start + B until it changes to red. The controller will not function on the Switch if it is blue.

• To set the DPad to Left Analog mode, press and hold Left + Start for 3 seconds

• To set the DPad to Right Analog mode, press and hold Right + Start for 3 seconds

• To set the DPad to back to normal, press and hold Up + Start for 3 seconds

• To flip the face buttons A/B & X/Y, press and hold Down + Start for 3 seconds
  PC / ANDROID®

• The controller’s LED indicates the input mode it is in. To switch between the modes, press and hold Start + B until it changes color.
  » Red indicates it is in D-Input mode.
  » Blue indicates it is in X-Input mode.
  MAC®

• If the LED on the controller is blue, press and hold Start + B until it changes to red. The controller will not function on the console if it is blue.

SUPPORT

To stay up to date with the latest news, manuals, and firmware updates, visit www.retro-bit.com/support.
FCC WARNING
RF exposure statement
This equipment complies with the FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Retro-Bit and the Retro-Bit logo are registered trademarks of Kool Brands, LLC. ©SEGA. All rights reserved. SEGA is registered in the U.S. Patent and Trademark Office. SEGA and SEGA SATURN are either registered trademarks or trademarks of SEGA CORPORATION or its affiliates.
All other mentioned trademarks are either trademarks or registered trademarks of their respective owners. This product is licensed by SEGA of America, Inc. This is a Retro-bit product and is not endorsed, manufactured, produced, sponsored or licensed by Apple, Inc., USB Implementers Forum, Inc. or any of their affiliates.

© Kool Brands, LLC.
For more information, please visit www.retro-bit.com @retrobitgaming

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>