Idpoo HD 720P Magnetic Wireless Backup Camera Hitch with 7 Inch IPS Monitor User Manual
- June 9, 2024
- Idpoo
Table of Contents
- INTRODUCTION
- PACKAGE LIST
- FEATURE
- BEFORE BEGINNING INSTALLATION
- FUNCTIONS OF EACH PART
- CAMERA INSTALLATION
- MONITOR INSTALLATION
- START TO USE
- FINISH END TO USE
- FUNCTIONS AND OPERATION
- WIRING DIAGRAM
- SPECIFICATION & DIMENSION
- TROUBLESHOOTING
- FAQs
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Idpoo HD 720P Magnetic Wireless Backup Camera Hitch with 7 Inch IPS Monitor
User Manual
Note:please goto download latest user manual!
Note: please read the manual carefully before using!
INTRODUCTION
The user manual has a detailed description on how to correctly use the hitch camera and provides detailed product information, including operation, installation precautions and technical specifications.
PACKAGE LIST
- wireless camera:solo kit:1;dual kits:2;quad kit:4
- 1x monitor
- antenna: solo kit:2;dual kits:3;quad kit:5
- 1x 2.4G antenna extension cable(10ft)
- 1x CAR charger cable(incar)
- 1x USB charger cable(indoor)
- 1x fan-shaped mount bracket
- 1x mount metal plates (Optional)
- 1x magnetic car vent mount kit(Optional)
Note: The actual parts list may have small changes based on customer needs
FEATURE
- Wireless transmission up to 200ft range in open area
- Camera magnetic base for instant mounting and removing
- Built-in rechargeable long life battery for about 15Hrs of continuous use.
- Color HD 7″ IPS monitor
- Install in minute ready to use no screw necessary no wiring
- With battery display and wireless signal strength indicator.
BEFORE BEGINNING INSTALLATION
Please indoor 3-minute simple basic function verification before actual installation on the trucks/trailers/RVs.
FUNCTIONS OF EACH PART
Note: in the pairing mode re-power the camera then it will show a text “Successfully Pairing” or “Pairing Fail”
CAMERA INSTALLATION
Recommended installation placement that close to hitch ball and adjust the camera angle of viewing comfort.
MONITOR INSTALLATION
Recommended installation location of viewing comfort and adjust mounting angle to allow optimum driver viewing comfort.
START TO USE
- Turn on the camera by long press the power button(hold 5s), then the red led will turn on.
- You will view the camera image on your monitor.
FINISH END TO USE
Turn off the camera by long press the power button, then the 4 led will flash once at the same time, avoiding the camera is always on and draining battery.
FUNCTIONS AND OPERATION
-
Menu setting:
Press the “MENU” button on the panel, can open the option
of the “contrast”, “saturation” and “brightness” in menu -
Flip setting:
Press “FLIP” button set UP, Down,
Left(frontview),Right(rearview) flip image -
ParkingLine setting:
Press “ParkingLine ” button, parking line setting on/off. -
Support camera charge methods:
CAR charge cable/USB charge cable/power cable. -
Test signal strength:
Put the monitor and the camera at the intended position to test signal strength. -
Camera pairing:
Firstly, Short press the “Pairing” button on the monitor enter to the single- channel state; Secondly, Long press the “Pairing” button to enter the pairing state (the state lasts for 10S) and display “pairing” (as shown in the figure below). In the pairing state, interrupt the power supply of the camera and re- power it, It will show a text“Successfully Pairing”, or will show “Pairing Fail” means failure to pair, needs to pair again; -
Toggle split screen:
Short press the “Pairing” button on the monitor to switch from Full spilt screen, Dual spilt screen or Quad spilt screen. -
Configure split screen(for dual or quad camera kit ):
Long press(hold 10S) the “Decrease” button on the monitor to switch from Full spilt screen, Dual spilt screen or Quad spilt screen.
WIRING DIAGRAM
SPECIFICATION & DIMENSION
Wireless camera
Sensor | 1/2.7” Color CMOS |
---|---|
Resolution | 1280x720P |
System | P/N auto |
Viewing Angle | 120˚ |
Night Vision | 4 infra-red lights |
Transmission Type | Digital Wireless (2400-2483.5MHz) |
Transmission Range | up to 200ft in open area |
Waterproof Level | IP67 |
Operation Temperature | –20℃ ~ 70℃ |
Battery Capacity | 6400mAh |
Battery working time | up to 18 hrs daytime/15hrs night |
Battery standby time | up to 360 hrs daytime/68 hrs night |
Battery Charging time | 8 hrs(80%),16 hrs(100% full) |
Battery capacity indicator | 4 LED lights |
Built-in Strong Magnet Base | Yes |
Camera adjustable angle | 0-100 degree |
Dimensions | 7445.556.5mm |
Wireless monitor
Lcd size | 7” color IPS pannel |
---|---|
Resolution | 1024×3(RGB)x600 |
View angle | U/D:85˚;L/R:85˚ |
Power Supply | DC9-36V |
Power Consumption | <3W |
Working temperature | -20~+70℃ |
Transmission Type | Digital Wireless (2400-2483.5MHz) |
Transmission Range | up to 200ft in open area |
TROUBLESHOOTING
If you have any questions about this product/free extend
your warranty to 12 Months, contact:
csderk@outlook.com
-
No signal
-
Please check the camera is turn-on or draining battery.
-
Please check the antenna are plugged on the camera.
-
Please check the angle of the antenna.
-
Please check metal obstacles near the antenna.
-
Pairing information is missing or wrong, please re-pair.
-
Out of range: please add an antenna extension cable or change the camera mounting location, The extension antenna for camera or monitor to bypass obstacle and allows the camera to be placed in an obstructed location with the antenna positioned in an unobstructed area
-
No picture
-
(1) Pairing information is missing or wrong, please re-pair.
-
(2)Out of range, the wireless signal is blocked too badly or
poor signal, please add an antenna extension cable or change the camera mounting location. -
(3) Please check low voltage red light blinking(flash) indicator, please charge first!
-
Freezes and disconnects / Unstable / static video
-
Out of range, Please add an antenna extension cable or change the camera mounting location.
-
The wireless signal is blocked too badly or poor signal, please add an antenna extension cable or change the camera mounting location.
-
Fuzzy picture,Not clear
-
Please remove the camera lens protector to get best picture quality after install.
-
Please check whether wipe off the camera lens.
-
The mounted camera slides or falls Please check whether remove the film from the camera base,
-
for mounting non-magnetic surface(plastic/aluminum/glass/wood surface) Please use the mount metal plates with strong adhensive,
Notes:It takes 72 hours to reach the best effect after pasting
FAQs
Q:Battery life
A: charged time:8 hour(80%), daytime continuous work time:18 hours,night continuous work time:15 hours,cold weather will consume power a little faster.
Q:How to check the camera turn-on/turn-off mode?
A: Please check after short press the power button, turn-on 8 mode when the red led is on status ,turn-off mode or drain battery when the red led is off status.
Q:How to check whether the camera is draining the battery ?
A: the 4 leds of the camera are always off by long press the power button hold 3 second.
Q:How to turn on/off the camera?
A: turn on: the red led on when long press the power button hold 3 second; turn off: the full four led blink on and then all off when long press the power button hold 3 second.
Q:How to check the battery?
A: In power on mode, Please check whether the four leds of the camera indicator by short press the power button, one red led on plus three green led on(about 100%), one red led on plus two green led on(about 75%), one red led on plus one green led on(about 50%), one red led on plus three green led off(about 25%),full four led off (about 0%).
Q:How to check low voltage of the “No picture /Fuzzy picture”
A: the red LED blinking(flash) indicator, please charge first!