AMKETTE Air 600 600 Qi Certified Wireless Charging Pad User Guide

: June 6, 2024
: Amkette

Table of Contents

AMKETTE Air 600 600 Qi Certified Wireless Charging Pad
BOX CONTENTS
SPECIFICATIONS
ATTENTION
HOW TO USE
LED STATUS INDICATOR AND PROTECTION FEATURES
TROUBLESHOOTING
WARRANTY STATMENT
CUSTOMER CARE CENTER
Read User Manual Online (PDF format)
Download This Manual (PDF format)

AMKETTE Air 600 600 Qi Certified Wireless Charging Pad

BOX CONTENTS

SPECIFICATIONS

Output	SW/7.SW/l0W/lSW
Product Standard	Qi Certified. QI-ID: 6768
Charging Distance	�-6mm
Charging Efficiency	“80%
Product Material	RoHS Certified PC+ABS
Compatible Power Adapters	– For standard SW wireless charging mode use SV/2A

power adapter.

– For iPhone 7.SW wireless charging mode use 9V/1.67A adapter (QC 2.0/3.0).

– For Samsung l OW wireless charging mode use 9V/1.67A adapter (QC 2.0/3.0).

– For Samsung, LG, OnePlus 1SW wireless charging mode use 12V/1.5A adapter (QC 2.0/3.0).

ATTENTION

Do not put any metal objects like keys, rings, metallic phone case etc. on the charger.
Please do not vigorously shake or drop the charger.
Please do not dismantle or put it into fire or water.
Please do not use it in severely high temperature, high humidity or corrosive environment, to avoid damage to the circuit.
Please do not put a magnetic strip or chip card (Such as ID card, credit card etc.) on the charging pad to avoid damaging the card.

HOW TO USE

SIMPLY CONNECT THE WIRELESS CHARGER TO A SUPPORTED POWER ADAPTER USING THE PROVIDED CABLE.

Notes:

For Standard Wireless Charging use 5V – 2A power adapter.
For Fast Wireless Charging use a QC 2.0 / 3.0 power adapter.
Power Adapter is not included. Please use your phones original power adapter.

USING THE WIRELESS CHARGERSIMPLY PLACE YOUR PHONE ON THE CHARGING SURFACE TO START CHARGING YOUR DEVICE.
Notes:

Charger can be used in the Flat position or in the Standing position.
Landscape and Portrait modes are supported while in standing position.
The charger has two charging coils for maximum support.
Some phones may not align with the Qi Coils when used in the Standing position. In that case use the charger in the Flat position

LED STATUS INDICATOR AND PROTECTION FEATURES

Standby: When the Charger first turns ON, the light will turn blue, flash 3 times, and then turn OFF.

Charging: While charging a Qi Compatible Device, the LED indicator is blue,

Fully Charged : Once the Device is Fully charged, the LED will turn OFF, Foreign Object: The Air 600 – 15W comes with Foreign Object Detection. In case a non-Qi compliant phone, metal object, or magnet is placed, the Charger will flash Red until the object is removed.
Over-voltage protection, over-current protection, over-temperature protection and short circuit protection are always ON.

TROUBLESHOOTING

Check if the power outlet and adapter are working.
Check the adapter (must be 5V /2A or QC2.0/QC3.0).
Check the charging cable.
Unplug and plug the charging cable.
Check if the phone is QI wireless charging standard compatible.
Remove the phone case and try again.

WARRANTY STATMENT

Amkette PowerPro Air 600 – 15W Wireless Charger is backed by a 1 Year performance warranty against any manufacturing defects in material or workmanship from the date of original purchase. This warranty entitles the purchaser to get the product repaired / replaced under the following conditions:

The warrarty applies to the original purchaser. Proof of original purchase,s required.
The warranty does not cover the damage caused by misuse, abuse or improper storage.
In no event shall Amkette be responsible for direct, incidental, consequential or other damages o r any kind. Please contact our Technical Support Line and/or send the defective product, postage pre-paid, together with the proof of purchase to our Customer Care Service Center to avail warranty service. Return postage will be paid by us.