Idpoo CMOS Magnetic Backup Camera Wireless with 7 Monitor User Manual

June 14, 2024
Idpoo

CMOS Magnetic Backup Camera Wireless with 7 Monitor

Idpoo CMOS Magnetic Backup Camera Wireless with 7 Monitor
1 USER MANUAL

WIRELESS MAGNETIC BACKUP Idpoo CAMERA
with 7″ Split Screen Monitor
with Rechargeable BatteryIdpoo CMOS Magnetic Backup Camera Wireless with 7
Monitor Note: please download latest user manual!

Introduction

This User Manual has the appropriate usage of the hitch camera, providing comprehensive product information including operation, installation safeguards, and technical specifics.

Package contents

This package comes with the following items. Please check whether they are all included in the packaging box. If one or some is missing, please contact Idpoo directly for replacement.

| Monitor x1
---|---
| Camera x1(Single kit)
Camera x2(Double kit)
Camera x4(Quad kit)
| Antenna x2(Single kit)
Antenna x3(Double kit)
Antenna x5(Quad kit)
| Antenna extension x1
| Fan-shaped bracket x1
| Car charger cable x1
| USB charger cable x1
| Mount metal plate x1 (Optional,Not included)
| Car vent mount x1
(Optional,Not included)
| User manual x1

Note: The parts included may be slightly adjusted based on customer requirements.
Pre-installation Note Be sure to test a camera system before installing it in your vehicle. If the test is OK, the camera is charged and ready to install. The following testing steps: Step1:Supply power to the monitor.if the background blue light of all keys is on and the monitor displays the channel’s name and radio strength bar information, indicating that the monitor is on. Step2:Powering on the camera. Step3:The camera is automatically connected to the monitor and the image appears on the monitor by default
Charge the camera
Charge the camera before you install it on your vehicle, When the camera is charged, the red or green indicator light flash After fully charged,four indicator light stay on.
Note1: For camera, you need to remove the cover before charging.
Note2: Please use a car chager cable or a standard USB charger with a rated output of 2000mA or higher

INSTALLATION

Install the Camera

  1. The installation location of the camera
    The installation location of the camera is flexible. Find the best installation location depending on the vehicle models to install it.

  2. Install the camera
    Install the antenna on the camera before installation. Magnet based camera is easily mounted on any vehicle surface Note: Please use the mount metal plates with strong adhesive if the surfaces is Non-magnetic surfaces (Plastic/Aluminum/Glass/Wood).

  3. Adjust the angle of the camera
    Camera up and down adjustable angle range about 0 degrees to 100 degrees.

Install the Monitor

  1. Clean and dry the area of the dashboard where you would like to mount your monitor
  2. Attach the antenna to the monitor
  3. Connect the monitor cable with the car charger calbe.Plug the car charger into the cigarette lighter port in your car.
    Note: if the signal is week(below 3-bars signal),please use an extension antenna to strengthen the signal

OPERATE INSTRUCTIONS

Camera Operations
How to check the camera status with the power button?
Short-pressing the power button briefly and checking the red indicator light. If it is lit, indicating that the camera is power-on. If it is not, indicating that the camera is power-off.
How to power on carmera with the power button?
If the status check confirms that the camera is powered off, then long- pressing and holding the power button for about 3 seconds. If the red indicator light is lit, indicating that the power-on operation has been successful.
How to power off carmera with the power button?
If the status check confirms that the camera is powered on, then long-pressing and holding the power button for about 3 seconds. If the four indicator lights flash once then off, indicating that the power-off operation has been successful.
Important Note:
If the status check confirms that the camera is powered off, then long- pressing and holding the power button for about 3 seconds, if the red indicator lights is off, indicating that the battery is exhausted and needs immediate charging.
Or long-pressing and holding the power button for about 3 seconds twice consecutively, if the red indicator light is always off. indicating that the battery is exhausted and needs immediate charging.
Note for the indicator light:
the indicator lights will automatically turn off after staying on about 5 seconds, this is designed to use the battery for as long as possible.
Note: If the battery is exhausted, please recharge it with the charging cable.
Note: Always keep weatherproof cover fitted regardless of conditions.
Camera status indicator light reference:

Camera status indicator light Description
Off Camera power off after short-pressing the power button
Glows 5s then off Indicator lights automatically turn off after short-

pressing power button
| Flash| The battery voltage is low or the battery is being charged
| Flash Once| Camera power-off operation was successful

Monitor Operations

DOWN key: Back/Decrease or Switch Single/2-Split/4-Split screen mode
MENU key: Menu settings
UP key: Forward/Increase
POWER key: Power on/off
FLIP key: Switch Mirror/Normal/Up/Down image
Parking Line key : turn on/off the parking line
PAIR key: Pair the monitor with the camea or Switch CAM1/CAM2/CAM3/CAM4 channel or Split Screen

Menu Settings
Press the MENU key once to enter the brightness mode, press DOWN/UP key to adjust data
Press the MENU key again to enter the contrast mode, press DOWN/UP key to adjust data
Press the MENU key again to enter the saturation mode, press DOWN/UP key to adjust data
Press the MENU key again to exit the menu settings
Basic Functions

  1. How to turn on/off the parking line ?
    Press the Parking Line key once to turn on the parking line
    Press the Parking Line key again to turn off the parking line

  2. How to switch Mirror/Normal/Up/Down image
    Press the FLIP key once to switch mirror image
    Press the FLIP key again to switch normal image
    Press the FLIP key again to switch Up image
    Press the FLIP key again to switch Down image

  3. Standby mode
    When the camera and monitor work normally, press the POWER key, the monitor turn off and enter standby mode, the background blue light of all keys is off and the background red light of power key is only on, Press the power key again to exit standby mode. Note: the monitor will automatically turn off and enter standby mode when there is no image for more than 25 seconds

  4. Day and Night mode
    Day mode:the camera automatically switches to the color mode when the amblent light are good,and the screen displays the color image Night mode:the camera automatically switches to the night mode at night or under low light conditions. The infrared lights turn on to provide light and the screen displays black and white image

Advanced Functions

  1. How to switch between Single/2-Split /4-Split Screen ?
    Press and hold the DOWN key once of the monitor for about 5 seconds until the 2-Split screen appears on the monitor you need.
    Press and hold the DOWN key again of the monitor for about 5 seconds until the 4-Split screen appears on the monitor you need.
    Press and hold the DOWN key again of the monitor for about 5 seconds until the Single screen appears on the monitor you need.

  2. How to switch between CAM1/CAM2/channel or 2-Split Screen ?
    (for dual camera kits)
    Press the PAIR key of the monitor once to switch to CAM1 channel
    Press the PAIR key of the monitor again to switch to CAM2 channel
    Press the PAIR key of the monitor again to switch to 2-Split screen

  3. How to switch between CAM1/CAM2/ CAM3/CAM4 channel or 4-Split Screen ?
    (for quad camera kits)
    Press the PAIR key of the monitor once to switch to CAM1 channel
    Press the PAIR key of the monitor again to switch to CAM2 channel
    Press the PAIR key of the monitor again to switch to CAM3 channel
    Press the PAIR key of the monitor again to switch to CAM4 channel
    Press the PAIR key of the monitor again to switch to 4-Split screen

  4. How to pair the camera?
    CAM1 uses CAM1 channel by default and is paired before leaving the factory,no need to pair again.
    If you need to re-pair the camera,please follow the steps:

  5. Pick up the monitor, Mount one of the antennas on the monitor, Press the POWER key of monitor to activate the monitor.

  6. Press the PAIR key of the monitor once to switch to CAM1 channel,and the CAM1 channel you need will pair.

  7. Press and hold the PAIR key of the monitor for about 5 seconds until the “Pairing…” appears on the monitor, indicating that the monitor enter the pairing mode.

  8. Pick up the camera, Attach another antenna to the camera, Power off the camera and quickly Power on.

  9. The image appears on the monitor,meas pairing is successful.
    Note1: Please power on the camera after completing the step 1-3,or the pairing will fail.
    Note2: the pairing timeout is 30 seconds.if the pairing is not completed in seconds, the “Pairing…” disappears on the monitor.
    Follow the steps to pair the camera again.if the pairing fails after several attempts, please contact customer support: support@camtrh.com

  10. How to pair the second camera?
    CAM1 uses CAM1 channel by default and is paired before leaving the factory,no need to pair again.
    If you need to re-pair/change /install the CAM2,please follow the steps:

  11. Pick up the monitor, Mount one of the antennas on the monitor, Press the POWER key of monitor to activate the monitor.

  12. Press and hold the DOWN key of the monitor for about 5 seconds until the 2-Split screen appears on the monitor

  13. Press the PAIR key of the monitor once to switch to CAM1 channel, Press the PAIR key of the monitor again to switch to CAM2 channel,and the CAM2 channel you need will pair.

  14. Press and hold the PAIR key of the monitor for about 5 seconds until the “Pairing…” appears on the monitor, indicating that the monitor enter the pairing mode.

  15. Pick up the second camera, Attach another antenna to the camera, Power off the camera and quickly Power on.

  16. The image appears on the monitor,meas pairing is successful, press the PAIR key to switch to the 2-split mode,Images on both channels.
    Note1: Please power on the camera after completing the step 1-4,or the pairing will fail.
    Note2: the pairing timeout is 30 seconds.if the pairing is not completed in seconds, the “Pairing…” disappears on the monitor. Follow the steps to pair the camera again.if the pairing fails after several attempts, please contact customer support: support@camtrh.com

Radio Strength & Battery Capacity Indicator reference

Radio Strength Description
5-bars,very good
4-bars,good
3-bars,normal
2-bars, weak
1-bars,very weak 0-bars,very weak

Battery capacity Indicatoricon on monitor| Battery capacity Indicatorlights on camera| Description
---|---|---
| | 4-bars,full 100%
| | 3-bars, about 75%
| | 2-bars,about 50%
| | 1-bars, low voltage
| | 0-bars, low voltage

Technical Specifications

Camera

Sensor 1/2.7” Color CMOS
Resolution 1280x720P
System Pal/Ntsc auto
Viewing Angle 120°
Night Vision 4 infra-red lights
Transmission Type Digital Wireless (2400-2483.5MHz)
Transmission Range up to 200ft in open area
Waterproof Level IP67
Operation Temperature ­20 ~ 70
Battery Capacity 6400mAh

Monitor

LCD Size 7” color IPS panel
Resolution 1024×3(RGB)x600
View Angle U/D:85°;L/R:85°
Power Supply DC9-36V
Power Consumption <3W
Working Temperature -20~+70
Transmission Type Digital Wireless (2400-2483.5MHz)
Transmission Range up to 200ft in open area
Battery Lifespan up to 18 hrs daytime/15hrs night
Battery Standby Time up to 360 hrs daytime/68 hrs night
 Batery Charging time 8 hrs (80%),16 hrs (100%)
Battery Capacity Indicator 4 LED lights
Built-in Strong Magnet Base Yes
Camera Adjustable Angle 0-100 degree

TROUBLESHOOTING

If you have any questions or to extend your warranty to 12 months, contact: support@camtrh.com.

  1. No Signal & No Image

  2. Confirm if the camera power on or if the battery is exhausted.

  3. Check that the antenna is properly connected to the camera.

  4. Check for metallic obstructions near the antenna.

  5. If pairing information is lost or incorrect, re-pair the camera.

  6. If out of range, consider adding an antenna extension cable or altering the camera’s position.
    The extension antenna can be used to bypass obstacles and facilitate camera placement in blocked areas, while ensuring the antenna is in an area free of obstructions.

  7. Video Freezes, Disconnects/ Unstable Video / Static Video

  8. If out of range, consider adding an antenna extension cable or relocating the camera.

  9. If signal is weak or heavily blocked, consider adding an antenna extension cable or relocating the camera mounting.

  10. Fuzzy Picture/Unclear Pictures

  11. Please ensure removal of the camera lens protector to attain optimal image quality post-installation.

  12. Please check whether the camera lens are wiped off.

  13. Mounted Camera Slips / Falls
    Please check whether the film from the camera base is removed.

  14. How to Mount on Non-magnetic Surfaces (Plastic/Aluminum/Glass/Wood)
    Please use the mount metal plates with strong adhesive.

Note: Maximum adhesion is achieved 48 hours post-application.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals