Cell2 SW610 Multi-Purpose 6-Switches Control Panel User Manual
- June 9, 2024
- Cell2
Table of Contents
Multi-purpose 6-switches Control Panel
210525SW610
SW610 Multi-Purpose 6-Switches Control Panel
Wiring
RED ……………… to +VDC
BLACK …………. to -GND
WHITE ………….. to LED Indicator Signal (Traffic Arrow or Lightbar)
GREEN …………. AUX (Output signal for optional relay)
ORANGE ………. Left Arrow
BLUE ……………. Right Arrow
BROWN ………… Warning Mode
YELLOW ………. Flash Pattern
[ON/OFF Switch] [ON/OFF Switch] [ON/OFF Switch] [ON/OFF Switch] [Momentary
Switch]
Switch Specification
Input Voltage: 10~30 VDC
Input Current: 0.2A / port 1.0A / 6 port
Output Voltage: 10~24 VDC
Output Current: 0.2A x 1 port (AUX) ; 0.01A x 5 ports
Fuse Rating: 2A
Recommended Relay
Specification (User-supplied)
Input Voltage: 10~24 VDC
Input Current: < 200mA
Screw Mount Installation
NOTE: Connect only the RED and BLACK wires to the power supply wiring harness.
Console Mount Installation
Documents / Resources
|
Cell2 SW610 Multi-Purpose 6-Switches Control
Panel
[pdf] User Manual
SW610 Multi-Purpose 6-Switches Control Panel, SW610, Multi-Purpose 6-Switches
Control Panel, 6-Switches Control Panel, Control Panel
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>