alzaTools AT-CGT20V Cordless Grass Trimmer User Manual

alzaTools AT-CGT20V Cordless Grass Trimmer

SAFETY INSTRUCTIONS

Translation of the original user manual
Read these operating instructions carefully before use. Familiarize yourself with the controls and proper use. Keep the instructions in a safe place for future reference.
The machine is designed for personal use in gardens, backyards or other parts of the property. It is not intended for commercial or other use.

EXPLANATION OF SYMBOLS ON THE PRODUCT PACKAGING/TYPE LABEL

Read the instructions for use carefully.
Wear eye protection.
DANGER! Take extra care not to injure yourself from falling objects. Keep by-standers at a safe distance.
Do not expose to rain, water or moisture.
Wear ear protection.
⚠WARNING: Pay attention to all instructions.

Training

• Never allow children or people unfamiliar with these instructions to use the machine. The age of the operator may be limited by local regulations.
• Do not operate the machine if there are people, especially children, or pets nearby.
• Keep in mind that the operator or user is responsible for accidents or hazards to others or their property.
• Children must not play with the machine. Cleaning and user maintenance must not be done by children.
• The machine must only be used with the power supply that is included or one that the manufacturer recommends as suitable or compatible.

Preparation

• It does not replace a non-metallic cutting tool with a metal cutting tool.
• Wear ear protection and wear safety goggles. Wear protective gloves at all times when the machine is in operation. We also recommend wearing a protective shield.
• Check the battery for signs of damage or ageing before using. If the battery is damaged, do not use it.
• Always visually inspect the machine before use for damage and missing or misplaced guards or protectors.
• Always wear work boots and long trousers when working with the machine. Do not work with the machine without shoes or in open-toe sandals. Do not wear clothes that have loose parts or from which cords or ties hang.
• Do not wear loose clothing or jewellery that may be drawn into the air intake. Keep long hair a safe distance from the air intake.
• Only operate the machine in the recommended position and only on a firm, level surface.
• Before use, check the place where you will use the machine. Remove any stones, branch-es, toys, cables and other foreign objects that could hit the machine and cause a dangerous situation or serious injury.

Activity

• Keep your balance throughout the mowing operation. Always be confident when standing on slopes and walking. Never run. Hold the ma-chine with both hands.
• Do not touch moving dangerous parts until the machine has been switched off, the battery has been removed and the dangerous parts have come to a complete stop.
• Only use the machine in daylight or with good quality artificial lighting. Only use the machine only in dry and favorable weather. Do not use it in bad weather conditions, especially if there is a risk of lightning.
• Never operate a machine that has damaged guards or protectors or no guards or protectors in place.
• Make sure that there are no power or extension cords, water pipes or hoses, gas lines, etc. near the machine.
• Before starting the machine, make sure that the cutting tools do not touch any hard objects such as branches or stones.
• Do not lift the machine to mow at heights. The maximum height to which the machine can be raised is waist height. Do not use the machine at heights. Do not stand on a ladder, wall, or unstable surface when using the machine.
• Only start the motor if your hands and feet are far enough away from the cutting tool.
• Keep the ventilation holes clean, remove dirt regularly and never block them.
• Always switch off the machine and remove the battery:
  • whenever the machine is left unattended;
  • before removing a blockage;
  • before checking, cleaning or working on the machine;
  • after encountering a foreign object;
  • if the machine starts to vibrate excessively;
  • if you make adjustments and before replacing accessories and storing;
  • whenever you move the machine to another location.
• Be careful not to injure your hands or feet with the cutting tool.
• Wait until the machine reaches maximum speed before mowing.
• Do not throw the machine to the ground. There is a risk of serious damage. Only throw the ma-chine down if there is a serious danger to the operator or bystanders.
• Do not press on the machine when mowing. Move it freely.
• If the machine jams, first turn off the machine and remove the battery. Wait until the moving dangerous parts have come to a complete stop. Only then should you remove the blocked material.
• To prevent accidental starting after installing the battery, always first make sure that the safe-ty switch is fully functional. Never use the ma-chine if the safety switch is damaged or taken out of service. Do not carry the machine with your finger on the switch.
• When lifting the machine off the ground, bend your knees for more stability.
• Do not use the machine near flammable or ex-plosive substances.
• We recommend that you rest regularly when using the machine for at least 10 to 20 minutes after each hour of operation, in order to avoid a dangerous situation due to operator fatigue.
• Use a shoulder belt if the machine is equipped with one.

Maintenance and storage

• Whenever the machine is stopped for repair, inspection or storage, or for changing accessories, it must be turned off, the battery re-moved, and when all moving parts have come to a complete stop. Let the machine cool down before inspecting, adjusting, etc. Handle the machine carefully and keep it clean.
• The machine must only be serviced by a qualified service technician, who must only use original spare parts from the manufacturer to avoid dangerous situations or injuries.
• The machine does not contain user-serviceable parts. If the machine needs to be repaired, modified or adjusted, contact an authorized service centre.
• Follow the instructions in the manual when lubricating and replacing accessories.
• Let the machine cool down before storing.
• Store the machine in a dry place out of the reach of children.
• For safety reasons, have worn or damaged parts replaced by an authorized service centre. Always make sure that the service uses original spare parts and accessories.
• Regularly check the tightness of the bolts, nuts and switches.
• Do not expose the machine to rain. Only store the machine indoors.

THE SAFETY AND USER INSTRUCTIONS IN THIS MACHINE MANUAL MUST ALWAYS BE FOLLOWED EVEN IF YOU ARE FAMILIAR WITH THE MACHINE AND USING IT. IMPROPER USE OR FAILURE TO FOLLOW THE SAFETY OR USER INSTRUCTIONS IN THIS MANUAL CAN CAUSE SERIOUS PERSONAL INJURY.

GENERAL SAFETY INSTRUCTIONS FOR CORD-LESS TOOLS

• All safety and user instructions contained in the manual must be read before using the tool, even if the user is familiar with the use and operation of a similar model.
• Keep this instruction manual in a safe place for future reference.
• If you sell, pass on or give the tool to another person, always include these operating instructions so that other persons can familiarize themselves with the safety and user instructions.

Working environment

• The working environment should be clean, clear and well lit. Clutter and poor lighting can cause a dangerous situation.
• Do not use the tool in dusty environments, places where flammable or explosive substances are stored, etc.
• Always make sure that children and bystanders are at a safe distance from the tool whenever it is in operation.

Electrical safety

• Only use the battery that is supplied with the machine or the manufacturer specifies as suit-able.
• Do not expose the tool to rain or moisture. If water enters the tool, there is a risk of electric shock.
• The tool can generate a weak electromagnetic field that is not dangerous to humans. However, persons with pacemakers or similar devices should contact the manufacturer of the device or consult their doctor for advice if they can use  such tools.

Safety of persons

• Be vigilant, watch what you are doing, and use common sense when working with tools. Do not use the tool if you are tired, unwell, or under the influence of alcohol, medication or drugs. A moment’s inattention while handling the tool can cause serious injuries.
• Wear protective equipment. Protect your face, especially your eyes. Wear safety goggles, a face shield, earmuffs/headphones and a safety helmet. Wear suitable work clothes and shoes. The correct clothing and appropriate protective equipment reduce the risk of serious injury.

Use and maintenance

• Do not use the tool with excessive force. Only use the tool for its intended purpose.
• Do not use the tool if the main switch does not work (it cannot be turned on or off). Such tools are dangerous and must be repaired.
• Switch off the tool and remove the battery whenever making an adjustment, changing accessories, cleaning or storing the tool.
• Keep the tool out of the reach of children and people who have not been instructed in the safe use of this product and also out of the reach of pets.
• Keep the tool and its accessories clean. Before each use, check the tool for damage, cracks or other deformations.
• Always entrust repairs, adjustments or other than routine maintenance only to an authorized service centre.
• Only use the tool and its accessories in accordance with the instructions in this manual.
• Keep the tool handles clean and dry. Wipe away any dirt from the handle immediately, especially oil or grease.

TECHNICAL DATA

Cordless grass trimmer

Parameter| Value
Battery voltage| 20 V DC
Maximum speed (no load)| 9,000 revolutions per minute
Cutting range| 254 mm
Dimensions (without battery)| 1120 x 300 x 160 mm
Weight (without battery)| 1.84 kg
Adjustable handle length| 1.1 up to 1.4 m
Adjustable trimmer head angle| Yes, 4 positions
Operating temperature| 0–45 °C
Protection class| III

Guaranteed LwA = 96 dB (A); K = 2.23 dB (A)
Handle vibration| ah = 1.453 m/s2; K = 1.5 m/s2
Front handle vibration| ah = 3.224 m/s2; K = 1.5 m/s2

The declared noise emission value (s) has been measured in accordance with a standard test method and can be used to compare one tool with another.
The declared noise emission value (s) may also be used in the preliminary performance assessment. Warning: Noise emissions during use may differ from the declared noise emission value depending on how and where the tool is used.

The declared total vibration value (s) was measured in accordance with a standard test method and can be used to compare one tool with another.
The declared total vibration value(s) can also be used in the preliminary performance assessment.
Warning: The vibration emission during the actual use may differ from the declared vibration emission value depending on how and where the tool is used.
Warning: Make sure that you take safety measures to protect the operator, which is based on an estimate of the actual conditions of use (taking into account all parts of the operation, such as when the tool is switched off and idling, except for the start time).

DESCRIPTION

1. Handle
2. Front handle
3. Motor unit
4. Wire protector
5. Spare trimming blades
6. Trimming head
7. Safety switch
8. On/off switch
9. Rechargeable battery (not included)
10. Release knob
11. Holder with spare blades
12. Swivel lock to adjust the length of the shaft
13. Locking knob for adjusting the vertical angle
14. Locking knob for adjusting the horizontal angle
15. Protective cover

USE

CHARGING THE BATTERY

Warning: Only use the battery specified by the manufacturer as suitable or recommended for the type of trimmer. Using another battery can result in loss of warranty, damage to the product, damage to property, or a serious risk of injury or death.
Recommended types of batteries and chargers
The battery and charger are not included. Only use these recommended types of batteries and chargers.

Battery:

• AlzaTools 20LBP20V (model AT-20LBP20V)
• AlzaTools 40LBP20V (model AT-40LBP20V)

Charger:

• AlzaTools 35FCH20V (model AT-35FCH20V)
• AlzaTools 24FCH20V (model AT-24FCH20V)
• AlzaTools DCH20V (model AT-DCH20V)

Inserting and removing the battery
Follow the instructions, directions and warnings in the relevant operating instructions when handling the battery.
Before inserting or removing the battery, make sure that:

1. the device is off;
2. the battery is fully charged.

Align the grooves in the battery compartment at the back of the trimmer with the slots on the battery and slide it into the trimmer until you hear a click (Fig. A).
If you need to remove the battery, press the button on the battery and pull it out of the trimmer. When inserting and removing the trimmer and battery, hold it firmly to prevent damage from improp-er handling (e.g., falling).
Do not insert or remove the battery by force. If it cannot be easily removed, it is likely that it has not been inserted correctly. Contact an authorized service center.

Charge status check
The battery is fitted with a charge status indicator (3 LEDs). To check the charge status, press the but-ton on the side (Fig. C). If all LEDs are lit, the charge level is high. When two LEDs are lit, the battery is partially discharged. If only one LED is lit, the battery is discharged and must be recharged.

ASSEMBLING AND DISASSEMBLING THE TRIMMER
The trimmer is delivered partially disassembled from the factory.
Warning: When assembling and disassembling the trimmer, always make sure that it is switched off and the battery is removed.

Front handle installation

1. Attach the front handle to the holder on the handle (Fig. C1).
2. Make sure that the holes in the handle and in the holder are aligned and thread the holes through the release knob (Fig. C2).
3. Tighten counterclockwise until you feel resistance (Fig. C3).

Installation and replacement of trimming blades
Warning: Only use the blades supplied or those recommended by the manufacturer. Before each use, check the condition of the trimming blades for damage or breakage. Do not use the trimmer with damaged blades or blades that show signs of damage.
Two trimming blades must be installed to ensure proper trimmer operation.

1. Turn the trimmer upside down.
2. Insert the wider hole in the blade on the protrusion at the bottom of the trimmer head and pull towards you until you feel resistance (Fig. D)
3. Repeat with the other blade.
4. If you need to replace the trimmer blade, push it away from you and remove it from the trimmer head. Then insert a new blade.

Installation and replacement of the trimmer head
Warning: Check the condition of the trimmer head before each use. If it is damaged, replace it with a new one. Always use the original trimmer head. Contact an authorized service centre.

1. Turn the trimmer upside down.
2. Loosen the screw in the middle of the trimmer head and unscrew it (Fig. G).
3. Carefully remove the trimmer head from the shaft.
4. Place the new trimmer head on the shaft, insert the screw and tighten it.
5. Before use, make sure that the trimmer head does not move and is firmly in place.

Installation and replacement of the protective cover
Warning: Before each use, make sure that the cover is firmly attached and does not show signs of damage. Otherwise, replace it with an original spare part.

1. Before installing or replacing the guard, first remove the trimming blades – see section “Installing and replacing the trimming blades”.
2. Installation Place the protective cover on the motor unit so that the holes in the protective cover align with the holes in the motor unit. Insert the screws into the holes and tighten with a screw-driver (Fig. F). Make sure that the screws are fully tightened and that the cover does not move.
3. Replacement: Use a screwdriver to loosen the screws and remove them. Carefully remove the protective cover. Then proceed as in step 2 above.

PREPARATION FOR USE

Before preparing for use, make sure that the trimmer is turned off and the battery is removed.

Spare trimming blades
The set of trimming blades supplied can be attached to the rear part of the front handle (Fig. G1), where the holes for attaching the holder supplied with the set is supplied have already been pre-pared for this purpose.
Extend the ends of the holder and insert them into the prepared holes (Fig. G2).
If you need to remove the blades, grasp both ends of the holder and pull to remove it.

Handle length adjustment
Adjust the length of the handle to your requirements so that you can comfortably hold the handle with one hand and the front handle with the other. You can adjust the length from 1.1 to 1.4 m.

1. Release the rotary lock clockwise (Fig. H1).
2. Adjust the length of the handle by pulling or pushing it (Fig. H2).
3. Tighten the rotary lock counterclockwise until you feel resistance (Fig. H3). Always make sure that the rotary lock is fully tightened.

Adjusting the height of the front handle
The front handle can be moved up or down depending on your requirements so that you can easily reach it and comfortably handle the trimmer.

1. Loosen the release knob clockwise (Fig. I1).
2. Adjust the height of the front handle by sliding it up or down (fig. I2)
3. Tighten the release knob counterclockwise until you feel resistance (I3). Always make sure the release knob is fully tightened.

Modification of the wire guard
The wire guard is the boundary of the area in front of the trimmer and comes into contact with the surrounding objects around which the trimmer mows the grass. By installing and modifying it, you reduce the risk of damage to the trimming blades and objects. Extend or retract to adjust the safe distance between the trimmer head and the surrounding objects.

1. Slide out the wire guard if you need to increase the safety distance (Fig. J1).
2. Retract the wire guard if you need to shorten the safety distance (Fig. J2).

Horizontal angle adjustment
Adjust the horizontal angle of the trimmer head according to the needs of the working environment. You can adjust the horizontal angle at 90° in four steps.

1. Press and hold the lock to adjust the horizontal angle with one hand.
2. With the other hand, adjust the horizontal angle (Fig. K).
3. Once the trimmer head angle is set then release the lock. Always make sure that the lock is fully secured.

Vertical angle adjustment
Adjust the vertical angle of the trimmer head when using the trimmer to mow the edges of the lawn. You can set the vertical angle at 90° on each side.

1. Pull out the vertical angle adjustment lock (Fig. L).
2. Turn the entire trimmer head with the motor unit clockwise or counterclockwise.
3. Release the lock to secure the trimmer head at the desired angle. Always make sure that the lock is fully secured.

OPERATION

Intended use
This grass trimmer is designed for personal use for mowing grass in gardens, e.g. around rocks, under benches, trees and in hard-to-reach places. Do not use it for commercial or other purposes.

Switching On/Off
Before switching on the trimmer, make sure that:

• It is correctly assembled;
• All locking knobs are properly secured and all bolts and nuts are fully tightened;
• The battery is inserted correctly;
• The battery is fully charged.

For safety reasons, the grass trimmer is fitted with a safety lock that prevents unintentional starting. To start the trimmer, first press the safety catch and then press the on/off switch (Fig. M). The trimmer will start .

As soon as you release the switch, the trimmer automatically shuts off and operation stops. Warning: After switching off the trimmer, always wait until the trimmer blades have come to a complete stop.
Never use the trimmer if it only starts when the switch is pressed. In this case, contact an authorized service centre. The safety switch is damaged.
Warning: Do not disable the safety switch or attempt to bypass the safety system. Do not attempt to force the switch without first depressing the safety switch.

Mowing grass
Hold the trimmer firmly with both hands at an angle of about 50° to the ground.
Stand upright and stable when handling the trimmer. Move slowly from side to side. Cut the grass from top to bottom. Keep your balance throughout the mowing operation. Always be confident when standing on slopes and walking. Never run.
Do not allow the trimmer blades to touch the ground or any obstacles. They can be damaged. Do not use the grass trimmer to dig or burrow into the ground.
Do not lean, bend or stand on one leg, etc.
Warning: Do not try to mow long or thick grass in one cut. Tall grass can wrap around the trimmer head, jam and cause the motor unit to overheat. This could damage the trimmer.
Mowing grass around trees, blocks, walls, stones, etc.
Raise and tilt the trimmer so that the trimmer blades do not touch the ground. Mow the grass at short intervals from top to bottom.
Carefully mow the grass around trees or other obstacles to avoid contact between the obstacle and the trimmer blades. We recommend keeping a safe distance of 5 cm from a tree or other obstacle. If necessary, adjust the distance of the wire guide. If the trimmer comes into contact with a tree or an-other obstacle, it can result in immediate damage. In this case, the trimming blade must be replaced immediately.

Mowing the edges of the lawn
By adjusting the vertical angle, you can use the trimmer to mow the edges of the lawn.
Adjust the horizontal and vertical angles as required – see the previous section.
Place the wire guard on the ground and slowly move the trimmer along the lawn, wall or other ob-stacle.
It is always important to adjust the vertical angle so that the trimmer head faces away from the trim-mer operator.

Overload protection
If you use the trimmer or battery in a way that draws an abnormally high current, the trimmer will au-tomatically stop without any indication. If this happens, release the switch to turn off the trimmer and stop the operation that caused it to overload. Then turn it on again.

Overheating protection
If the trimmer or battery overheats, the trimmer will automatically stop. If this happens, release the switch to turn off the trimmer and let the battery cool down. Then turn it on again.

Protection against excessive discharge
If the charge status drops excessively, the trimmer will automatically stop. If this happens, release the switch to turn off the trimmer. Remove the battery and charge it.
Note: Overload, overheating and over-discharge protection are the trimmer and battery safety sys-tems that protect them from damage. Do not attempt to bypass or modify these security features. There is a risk of serious injury or death.

MAINTENANCE AND STORAGE

Warning: Before any maintenance or cleaning of the trimmer, always make sure that it is switched off and the battery is removed.
The user must only carry out the maintenance and cleaning described in this manual. In the case of further maintenance, cleaning or adjustment, contact an authorized service centre.
Clean the trimmer after each use. This will ensure its long life.
Remove dust and dirt from the trimmer. Turn the trimmer upside down and remove any grass clip-pings from the blades, the trimmer head, the inside of the guard and the wire guard.
If the trimmer is heavily soiled, wipe it with a clean, slightly damp cloth. Wipe dry with a clean cloth. Warning: Do not immerse any part of the trimmer in water or other liquids. Do not use a hose or pressure washer for cleaning. Do not expose the trimmer to dripping or splashing water.
Remove any dirt from the ventilation holes. Use a dry cloth. Do not allow water to enter the ventilation holes. There is a risk of damage to the motor unit.
Warning: Do not use petrol, thinner, alcohol or other similar substances for cleaning. There is a risk of surface damage, deformation or cracking.

Storage

Before storing, make sure that the trimmer is switched off, clean (especially the area around the trimmer head and blades), and that the battery is removed from the motor unit.
The grass trimmer can be hung on a wall. Proceed as follows:

1. Fold the front handle down to the handle.
2. Reduce the handle length to the minimum.
3. Adjust the horizontal angle of the trimmer head so that the trimmer fits more easily against the wall.
4. Hang the trimmer on the wall either by the wire guard or hang it by the catch at the back of the handle.

Keep the trimmer in a dry, well-ventilated area out of the reach of children, pets and persons who have not been instructed in the safe use of this product. Only store the trimmer indoors.

Fully charge the battery and store it in a dry and well-ventilated area where the temperature will not fall below freezing for a long period of time. When stored for a long time, recharge the battery every three months to extend its life.

TROUBLESHOOTING

centre.
The motor will switch off after a short period of operation.| Low charge.| Charge the battery. Replace if necessary.
The trimmer is overheated.| Let the trimmer cool down.
The trimmer does not reach the maximum speed.| The battery is not inserted correctly.| Insert the battery correctly as described in this manual.
Low charge.| Charge the battery. Replace if necessary.
The drive system is not working properly.| Contact an authorized service centre.
The trimming blades do not move. Switch off the trimmer immediately.| The trimming blades and head are blocked by a foreign object.| Remove the foreign object.
The drive system is not working properly.| Contact an authorized service centre.
Abnormal vibrations – stop using the trimmer immediately.| The drive system is not working properly.| Contact an authorized service centre.
The trimmer cannot  be switched off – remove the battery immediately.| Electrical or electronic fault.| Remove the battery and con- tact an authorized service centre.

If the problem is not listed in the table above or if the problem persists, turn off the trimmer, remove the battery, wait for all moving parts to stop, and contact an authorized service centre.

EC DECLARATION OF CONFORMITY

Identification of the manufacturer / importer’s authorized representative:
Manufacturer: Alza.cz, a. s.
Registered office: Jankovcova 1522/53, Holešovice, 170 00 Prague 7
Company ID: 27082440

Subject of the declaration:
Name: Cordless grass trimmer
Model/Type: AT-CGT20V

The above product has been tested in accordance with the standard (s) used to demonstrate compliance with the essential requirements set out in the Directive (s):
Machine directive 2006/42/EC
Electromagnetic compatibility (EMC) directive 2014/30/EU
ROHS directives 2011/65/EU and (EU) 2015/863
Directive 2000/14 / EC as amended by 2005/88 / EC

Reference to harmonized standards:
EN 60335-1:2012/A2:2019
EN 50636-2-91:2014
EN55014-1:2017
EN55014-2:2015

EC type-examination was carried out on:
No. 0123 TÜV SÜD Product Service GmbH, Certification Body, Ridlerstraße 65, 80339 Munich, Germany
Certificate number: M8A 063263 0068

Technical documentation is stored at:
Alza.cz, a. s.
Jankovcova 1522/53, Holešovice, 170 00 Prague 7
The year of manufacture of the machine and the serial number are indicated on the machine.

Ing. Jan Melena
Business Development Manager
Sales and Purchasing; Private Labels
In Prague, 16. 5. 2022

WARRANTY & SUPPORT

Your new product is protected by our 24-month warranty, or extended warranty (if stated), which you can apply at any of our points of sale. For inquiries, you can use the contact form or one of our international call centres.

Online: www.alzashop.com/contact

CE

This product meets all of the related basic EU regulation requirements. The EU declaration of conformity is available on www.alzashop.com/doc.
This product sold in the European Union meet the requirements of Directive 2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS).
The use of the WEEE Symbol indicates that this product should not be treated as household waste. By ensuring this product is disposed of correctly, you will help protect the environment.

For more detailed information about the recycling of this product, please contact your local authority, your household waste disposal service provider, or the shop where you purchased the item.

Co. Reg. No. 27082440
Alza.cz, a. s., Jankovcova 1522/53, 170 00 Prague 7, Czech Republic © 2022 Alza.cz, a. s. All Rights Reserved.

References

• Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
• Alza | Alzashop.com
• Alza.cz

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>