alzaTools AT-24FCH20V Fast Charger User Manual
- June 9, 2024
- alzaTools
Table of Contents
alzaTools AT-24FCH20V Fast Charger
SAFETY INSTRUCTIONS
EXPLANATION OF SYMBOLS ON THE PRODUCT PACKAGING/TYPE LABEL
Read the operating instructions carefully before use!
Protect from rain and moisture.
Ensure proper recycling of the
product at the end of its service life and all packaging materials.
Do not throw batteries into a fire!
Do not expose batteries to excessive
temperatures above 50 °C.
Do not throw batteries into water!
Protect from heat and fire
Protect from heat and fire.
Do not dispose of batteries with normal household waste.
Always remove the battery during work, transport, storage, maintenance or repair
Failure to follow the safety warnings and instructions may result in electric shock, fire and/or serious injury. Keep all safety warnings and instructions for future reference.
-
This charger is not intended for use by children or persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge. This charger may only be used by children from the age of 8 upwards and persons with limited physical, sensory or mental capabilities or lack of experience and knowledge if they are supervised by a person responsible for their safety or if they have been instructed in the safe handling of the charger and understand the dangers involved. Otherwise, there is a risk of incorrect operation and injury.
-
Supervise children during use, cleaning and maintenance. This will ensure that children do not play with the charger.
-
Only charge AlzaTools lithium-ion batteries with a capacity of 3 or more batteries.
The battery voltage must correspond to the charging voltage of the charger. Do not charge non-rechargeable batteries. Otherwise, there is a risk of fire and explosion. -
Protect the charger from rain and moisture.
Water entering the charger increases the risk of electric shock. -
Keep the charger clean. Pollution causes a risk of electric shock.
-
Check the charger, cable and plug before each use. If you find any faults, do not use the charger. Do not open the charger yourself and only have it repaired by qualified personnel using original spare parts. A damaged charger, cable and plug increase the risk of electric shock.
-
Do not operate the charger on a flammable surface (e.g. paper, textiles, etc.) or in a flammable environment. There is a risk of fire due to the charger heating up during charging.
-
Vapours may be emitted if the battery is damaged or used incorrectly. Supply fresh air and seek medical advice if you have any problems.
Vapours may irritate the respiratory tract. -
Do not cover the ventilation slots of the charger. Otherwise, the charger may overheat and will not work properly
TECHNICAL DATA
Chargers AT-24FCH20V and AT-35FCH20V are compatible with all AlzaTools batteries.
Nominal values
| Parameter | Value |
|---|---|
| Type of charger | AT-24FCH20V |
| Input voltage | 230 V DC |
| Input frequency | 50 Hz |
| Output voltage | 21.5 V |
| Maximum charging current | 2.4 A |
| Ambient/operating temperature range | 0–40 °C |
| Protection class | II |
EC DECLARATION OF CONFORMITY
Identification of the manufacturer / importer’s authorised
representative:
Manufacturer: Alza.cz, a. s.
Registered office: Jankovcova 1522/53, Holešovice, 170 00 Prague 7
Company ID: 27082440
Subject of the declaration:
Name: Battery charger
Model/Type: AT-24FCH20V, AT-35FCH20V
The above product has been tested in accordance with the standard (s) used
to demonstrate compliance with the essential requirements set out in the
Directive (s):
Low voltage equipment directive 2014/35/EU
Electromagnetic compatibility (EMC) directive 2014/30/EU
ROHS directives 2011/65/EU and (EU) 2015/863
Reference to harmonised standards:
EN60335-2-29:2004/A2:2010
EN60335-1:2012/A11:2014
EN62233:2008
EN55014-1:2017
EN55014-2:2015
EN61000-3-2:2014
EN IEC61000-3-2:2019
EN61000-3-3:2013
EN61000-3-3:2013/A1:2019
EC type-examination was carried out on:
No. 0123 TÜV SÜD Product Service GmbH, Certification Body, Ridlerstraße 65,
80339 Munich, Germany
Certificate number: N8A 17 07 63263 002, N8A 17 11 63263 008
Technical documentation is stored at:
Alza.cz, a. s.
Jankovcova 1522/53, Holešovice, 170 00 Prague 7
The year of manufacture of the machine and the serial number are indicated on
the machine.
Ing. Jan Melena
Business Development Manager
Sales and Purchasing; Private Labels
Prague, 22. 9. 2021
WARRANTY & SUPPORT
Your new product is protected by our 24-month warranty, or extended warranty (if stated), which you can apply at any of our points of sale. For inquiries, you can use the contact form or one of our international call center’s.
On -line:www.alzashop.com/contact
**United Kingdom +44 (0)2035144411
**
This product meets all of the related basic EU regulation requirements. The EU
declaration of conformity is available on
www.alzashop.com/doc.
This product sold in the European Union meet the requirements of Directive
2011/65/EU on the restriction of the use of certain hazardous substances in
electrical and electronic equipment (RoHS).
The use of the WEEE Symbol indicates that this product should not be treated
as household waste. By ensuring this product is disposed of correctly, you
will help protect the environment.
For more detailed information about the recycling of this product, please
contact your local authority, your household waste disposal service provider,
or the shop where you purchased the item.