alzaTools AT-CB20V Cordless Blower User Manual

alzaTools AT-CB20V Cordless Blower

SAFETY INSTRUCTIONS

Translation of the original user manual
Read these operating instructions carefully before use. Familiarize yourself with the controls and proper use. Keep the instructions in a safe place for future reference.
The machine is designed for personal use in gardens, backyards or other parts of the property. It is not intended for commercial or other use.

EXPLANATION OF SYMBOLS ON THE PRODUCT PACKAGING/TYPE LABEL

• Read the instructions for use carefully.
• Wear eye protection.
• Do not expose to rain, water or moisture.
• Keep bystanders at a safe distance.

SAFETY INSTRUCTIONS
Training

• Never allow children, persons with reduced mobility, sensory or mental disabilities, persons with insufficient experience and knowledge or persons unfamiliar with these instructions to use this machine; local regulations may limit the age of the operator.
• Do not operate the machine if there are peo-ple, especially children, or pets nearby.
• Keep in mind that the operator or user is re-sponsible for accidents or hazards to others or their property.
• Children must not play with the machine. Cleaning and user maintenance must not be done by children.
• The machine must only be used with the power supply that is included or one that the manufac-turer recommends as suitable or compatible.

Preparation

• Wear ear protection and goggles. Wear protec-tive gloves at all times when the machine is in operation. We also recommend wearing a pro-tective shield.
• Always wear work boots and long trousers when working with the machine. Do not work with the machine without shoes or in open-toe sandals. Do not wear clothes that have loose parts or from which cords or ties hang.
• Do not wear loose clothing or jewellery that may be drawn into the air intake. Keep long hair a safe distance from the air intake.
• Only operate the machine in the recommend-ed position and only on a firm, level surface.
• Do not work with the machine on paved or gravel surfaces where discarded material could cause injury.
• Always make sure that the fasteners, guards and shields, if equipped, are in place before use. Inspect the motor unit for damage. Re-place the entire set of worn or damaged parts to maintain balance. Replace damaged or illeg-ible labels.
• Before using, make sure that the battery is in-serted correctly and is not damaged, bloated or otherwise deformed.

Activity

• Before starting the machine, make sure that the air outlet is empty.
• Do not touch the air outlet with your face or body. Do not insert your hands, other body parts or clothing into the air outlet, vents or near moving parts. Never point the air outlet at another person or an animal.
• Do not block the air outlet. Take extra care when using the machine in a dusty environment.
• Do not use the machine to dispose of haz-ardous materials, such as nails, glass or other shards, blades, sharp objects, etc.
• Do not use the machine near an open flame, in an environment with flammable or explosive substances, etc.
• Do not use the machine to start a fire.
• Do not use the machine to inflate balloons, deck chairs, and similar items.
• Do not use the machine near windows, doors, etc.
• Always maintain balance and a stable posture. Only work where you can safely reach. Nev-er stand higher than the base of the machine when it is in operation.
• Only use the machine in daylight or with good quality artificial lighting. Only use the machine only in dry and favourable weather. Do not use it in bad weather conditions, especially if there is a risk of lightning.
• Move on carefully on slopes and keep your bal-ance.
• When working with the machine, walk freely, and never run or make any quick movements.
• Always stand outside the disposal area when the machine is in operation. Do not throw the material at people.
• Keep the ventilation holes clean, remove dirt regularly and never block them.
• If the machine makes an unusual noise or vi-brates, turn it off immediately and remove the battery. Take the following steps before restart-ing and operating:
  • check for damage;
  • have damaged parts replaced or repaired;
  • check the tightening on all loose parts.
• Prevent discarded material from accumulating in one place, such as in a corner. This can lead to the return of discarded material and conse-quent damage to property or injury.
• If the machine jams, first switch it off and re-move the battery. Remove the tube from the motor unit before removing the blocked mate-rial. For example, you can use a broom handle to remove blocked material from the tube.
• Do not move the machine while the motor is running.
• Switch off the machine, remove the battery and make sure that all moving parts have come to a complete stop:
  • whenever you leave the machine unattend-ed;
  • before cleaning a blocked tube
  • before checking, cleaning or working on the machine
  • if the machine starts to vibrate excessively.
• To prevent accidental starting after installing the battery, always make sure that the main switch is in the off position and do not carry the machine with your finger on the main switch.
• Do not use the machine for a long time at high or low temperatures.
• When lifting the machine off the ground, bend your knees for more stability.

THE SAFETY AND USER INSTRUCTIONS IN THIS MACHINE MANUAL MUST ALWAYS BE FOLLOWED EVEN IF YOU ARE FAMILIAR WITH THE MACHINE AND ITS USE. IMPROPER USE OR FAILURE TO FOLLOW THE SAFETY OR USER INSTRUCTIONS IN THIS MANUAL CAN CAUSE SERIOUS PERSONAL INJURY.

Maintenance and storage

• Whenever the machine is stopped for repair, inspection or storage, or for changing accessories, it must be switched off, the battery removed, and all moving parts must have come to a complete stop. Let the machine cool down before inspecting, adjusting, etc. Handle the machine carefully and keep it clean.
• The machine must only be serviced by a qualified service technician, who must only use original spare parts from the manufacturer to avoid dangerous situations or injuries.
• The machine does not contain user-servicea-ble parts. If the machine needs to be repaired, modified or adjusted, contact an authorized service center.
• Follow the instructions in the manual when lubricating and replacing accessories.
• Let the machine cool down before storing.
• Store the machine in a dry place out of the reach of the children.
• For safety reasons, have worn or damaged parts replaced by an authorized service centre. Always make sure that the service uses original spare parts and accessories.
• Regularly check the tightness of the bolts, nuts and switches.
• Do not expose the machine to rain. Only store the machine indoors.

GENERAL SAFETY INSTRUCTIONS FOR CORD-LESS TOOLS

• All safety and user instructions contained in the manual must be read before using the tool, even if the user is familiar with the use and op-eration of a similar model.
• Keep this instruction manual in a safe place for future reference.
• If you sell, pass on or give the tool to anoth-er person, always include these operating in-structions so that other persons can familiarize themselves with the safety and user instruc-tions.

Working environment

• The working environment should be clean, clear and well lit. Clutter and poor lighting can cause a dangerous situation.
• Do not use the tool in dusty environments, places where flammable or explosive substanc-es are stored, etc.
• Always make sure that children and bystanders are at a safe distance from the tool whenever it is in operation.

Electrical safety

• Avoid bodily contact with earthed surfaces such as pipes, radiators, stoves or refrigerators. If your body is grounded, there is an increased risk of electric shock.
• Do not expose the tool to rain or moisture. If water enters the tool, there is a risk of electric shock.
• The tool can generate a weak electromagnetic field that is not dangerous to humans. Howev-er, persons with pacemakers or similar devices should contact the manufacturer of the device or consult their doctor to see if they can use such tools.

Safety of persons

• Be vigilant, watch what you are doing, and use common sense when working with tools. Do not use the tool if you are tired, unwell, or under the influence of alcohol, medication or drugs. A moment’s inattention while handling the tool can cause serious injuries.
• Wear protective equipment. Protect your face, especially your eyes. Wear safety gog-gles, a face shield, earmuffs/headphones and a safety helmet. Wear suitable work clothes and shoes. The correct clothing and appropriate protective equipment reduce the risk of seri-ous injury.

Use and maintenance

• Do not use the tool with excessive force. Only use the tool for its intended purpose.
• Do not use the tool if the main switch does not work (it cannot be switched on or off). Such tools are dangerous and must be repaired.
• Switch off the tool and remove the battery whenever making an adjustment, changing ac-cessories, cleaning or storing the tool.
• Keep the tool out of the reach of children, pets and people who have not been instructed in the safe use of this product.
• Keep the tool and its accessories clean. Before each use, check the tool for damage, cracks or other deformations.
• Always entrust repairs, adjustments or other than routine maintenance only to an authorized service centre.
• Only use the tool and its accessories in accord-ance with the instructions in this manual.
• Keep the tool handles clean and dry. Wipe away any dirt from the handle immediately, es-pecially oil or grease.

TECHNICAL DATA

Cordless blower

Parameter| Value
Battery voltage| 20 V DC
Amount of air| 78 m3/h
Air speed| 190 km/h
No-load speed| 12,000 revolutions per minute
Dimensions (without battery)| 806 x 150 x 170 mm
Weight (without battery)| 1.2 kg
Operating temperature| 0–45 °C
Protection class| III
Sound pressure| LpA = 81.2 dB (A); K = 3 dB (A)
---|---
Sound power| LwA = 90 dB (A); K = 3 dB (A)

Guaranteed LwA = 95 dB (A); K = 3 dB (A)

Vibrations| ah = 2.142 m/s2; K = 1.5 m/s2

The declared noise emission value (s) has been measured in accordance with a standard test method and can be used to compare one tool with another.
The declared noise emission value (s) may also be used in the preliminary performance assessment.
Warning: Noise emissions during use may differ from the declared noise emission value depending on how and where the tool is used.
The declared total vibration value (s) was measured in accordance with a standard test method and can be used to compare one tool with another.
The declared total vibration value(s) can also be used in the preliminary performance assessment.
Warning: The vibration emission during the actual use may differ from the declared vibration emis-sion value depending on how and where the tool is used.
Warning: Make sure that you take safety measures to protect the operator, which is based on an estimate of the actual conditions of use (taking into account all parts of the operation, such as when the tool is switched off and idling, except for the start time).

DESCRIPTION

1. Tube
2. Tube release button
3. On/off slide switch
4. Handle
5. Rechargeable battery (not included)
6. Motor unit

USE

ASSEMBLY AND LAYOUT
The blower is delivered disassembled from the factory.
Warning: When assembling and disassembling the blower, always make sure that it is switched off and the battery is removed.

• Carefully remove all parts from the package and inspect them for damage. It is forbidden to use a damaged product or a product with visible damage.
• To fold the blower so that you can use it, grasp the motor unit with one hand and the tube with the other.
• Press the release button and place the tube on the outlet of the motor unit so that the release button fits into the hole in the tube when it is released (Fig. A)
• Release the lock and check that it clicks, and the tube does not rotate and is straight.
• If you need to remove the tube, press the catch and pull the tube away from the outlet of the motor unit.

CHARGING THE BATTERY
Warning: Only use the battery specified by the manufacturer as suitable or recommended for the type of blower. Using another battery can result in loss of warranty, damage to the product, damage to property, or a serious risk of injury or death.

Recommended types of batteries and chargers
The battery and charger are not included. Only use these recommended types of batteries and chargers.

Battery:

• AlzaTools 20LBP20V (model AT-20LBP20V)
• AlzaTools 40LBP20V (model AT-40LBP20V)

Charger:

• AlzaTools 35FCH20V (model AT-35FCH20V)
• AlzaTools 24FCH20V (model AT-24FCH20V)
• AlzaTools DCH20V (model AT-DCH20V)

Inserting and removing the battery
Follow the instructions, directions and warnings in the relevant operating instructions when handling the battery.
Before inserting or removing the battery, make sure that:

1. the blower is switched off;
2. the battery is fully charged.

Align the grooves in the battery compartment at the back of the blower with the slots on the battery and slide it into the blower until you hear a click (Fig. B).
If you need to remove the battery, press the button on the battery and pull it out of the blower (Fig. B). When inserting and removing, hold the blower and battery firmly to prevent damage from improper handling (e.g., falling).
Do not insert or remove the battery by force. If it cannot be easily removed, it is likely that it has not been inserted correctly. Contact an authorized service centre.

Charge status check
The battery is fitted with a charge status indicator (3 LEDs). To check the charge status, press the button on the side (Fig. C). If all LEDs are lit, the charge level is high. When two LEDs are lit, the battery is partially discharged. If only one LED is lit, the battery is discharged and must be recharged.

OPERATION

Intended use
This blower is designed to blow air from the tube, which removes unwanted material (e.g. leaves or twigs). The blower is intended for domestic use only. It is not intended for commercial use or use in an industrial environment.

Switching On/Off
Before switching on the blower, make sure that:

• It is correctly assembled;
• The battery is inserted correctly;
• The battery is fully charged.

Slide the switch forwards to switch on the blower; slide the switch backwards to switch off the blower (Fig. D). You may hear a click inside the blower as you move the switch. This is a normal occurrence.

Note: If you use the blower until the battery is discharged, let the blower cool down for at least 15 minutes before using it again with a second battery.

Use
Hold the blower firmly by the handle with one hand and switch it on.
Stand upright and stable when handling the blower. Move the blower slowly from side to side (Fig. E). Do not lean, lean forward or stand on one leg. Always be confident when standing on slopes and walking. Never run.
If you use the blower near buildings, cars, large stones, etc., always point the blower tube away from them.
If using the blower in a corner, point the blower tube directly into the corner, and then move back from the corner.
Warning: Do not place the blower on the ground while it is in operation. Dust or dirt can enter and damage the blower and result in injury.
Warning: Do not cover the ventilation holes (Fig. F). There is a risk of the motor unit overheating and irreversible damage.

Overload protection
If you use the blower or battery in a way that draws an abnormally high current, the blower will stop automatically without any indication. If this happens, slide the switch back to turn off the blower and stop the operation that caused it to overload. Then turn on the blower again.

Overheating protection
If the blower or battery overheats, the blower will stop automatically. If this happens, slide the switch back to turn off the blower and let the blower and battery cool down. Then turn on the blower again.

Protection against excessive discharge
If the charge level drops excessively, the blower will stop automatically. If this happens, slide the switch back to turn off the blower. Remove the battery and charge it.
Note: Overload, overheating and over-discharge protection are safety systems for the blower and battery, which protect them from damage. Do not attempt to bypass or modify these security fea-tures. There is a risk of serious injury or death.

MAINTENANCE AND STORAGE

Warning: Before any maintenance or cleaning of the blower, always make sure that it is switched off and the battery is removed.
The user must only carry out the maintenance and cleaning described in this manual. In the case of other maintenance, cleaning or adjustment, contact an authorized service centre.

• Clean the blower after each use. This will ensure its long life.
• Disassemble the blower and remove leaves, twigs, etc. from the tube. Make sure that the tube is clean.
• Wipe the motor unit with a clean, slightly damp cloth.
  Warning: Do not immerse any part of the blower in water or other liquids. Do not use a hose or pres-sure washer to clean the blower. Do not expose the blower to dripping or splashing water.

Remove any dirt from the ventilation holes. Use a dry cloth. Do not let any water enter the ventila-tion holes. There is a risk of damage to the motor unit.
Warning: Do not use petrol, thinner, alcohol or other similar substances for cleaning. There is a risk of damage to the surface finish, deformation or cracking.

Storage
Before storing, make sure that the blower is switched off, clean (especially the tube), and that the battery is removed from the motor unit.
Keep the blower in a dry, well-ventilated area out of the reach of children, pets and people who have not been instructed in the safe use of this product. Only store the blower inside a building.
Fully charge the battery and store it in a dry and well-ventilated area where the temperature will not fall below freezing for a long period of time. When stored for a long time, recharge the battery every three months to extend its life.

TROUBLESHOOTING

centre.
The blower switches  off  after a short time.| Low charge.| Charge the battery. Replace if necessary.
The blower is overheated| Let the blower cool down.
The blower does not reach the maximum speed.| The battery is not inserted cor- rectly.| Insert the battery correctly as described in this manual.
Low charge.| Charge the battery. Replace if necessary.
The drive system is not working properly.| Contact an authorized service centre.
Abnormal vibrations – stop us- ing the blower immediately.| The drive system is not working properly.| Contact an authorized service centre.
Problem| Cause| Solution
---|---|---
The blower cannot be switched off – remove the battery imme- diately.| Electrical or electronic fault.| Remove the battery and con- tact an authorized service cen- tre.

If the problem is not listed in the table above or if the problem persists, turn off the blower, remove the battery, and contact an authorized service centre.

EC DECLARATION OF CONFORMITY

Identification of the manufacturer / importer’s authorised representative:
Manufacturer: Alza.cz,a.s.
Registered office: Jankovcova 1522/53, Holešovice, 170 00 Prague 7
Company ID: 27082440
Subject of the declaration:
Name: Cordless blower
Model/Type: AT-CB20V
The above product has been tested in accordance with the standard (s) used to demonstrate compliance with the essential requirements set out in the Directive (s):
Machine directive 2006/42/EC
Electromagnetic compatibility (EMC) directive 2014/30/EU
ROHS directives 2011/65/EU and (EU) 2015/863

Reference to harmonised standards:

• EN60335-1:2012/A13:2017
• EN50636-2-100:2014
• EN ISO 12100:2100
• EN 62233:2008
• EN55014-1:2017
• EN55014-2:2015

EC type-examination was carried out on:
No. 0123 TÜV SÜD Product Service GmbH, Certification Body, Ridlerstraße 65, 80339 Munich, Ger-many
Certificate number: M8A 063263 0037

Technical documentation is stored at:
Alza.cz,a.s.
Jankovcova 1522/53, Holešovice, 170 00 Prague 7
The year of manufacture of the machine and the serial number are indicated on the machine.
Ing. Jan Melena
Business Development Manager
Sales and Purchasing; Private Labels

WEEE

This product meets all of the related basic EU regulation requirements. The EU declaration of conformity is available on www.alzashop.com/doc.
This product sold in the European Union meet the requirements of Directive 2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic equip-ment (RoHS).
The use of the WEEE Symbol indicates that this product should not be treated as household waste. By ensuring this product is disposed of correctly, you will help protect the environment.

Co. Reg. No. 27082440
Alza.cz,a.s., Jankovcova 1522/53, 170 00 Prague 7, Czech Republic © 2022 Alza.cz,a.s. All Rights Reserved.

References

• Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
• Alza | Alzashop.com
• Alza.cz

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>