cell2 ES3 3-LED Narrow Profile Lighthead Instruction Manual

cell2 ES3 3-LED Narrow Profile Lighthead

Surface Mount

Connect YELLOW wires of all heads together for synchronization (All heads should be set to the same pattern)

For Simultaneous or Alternating Flash:

1. Apply +VDC to RED and YELLOW wires simultaneously to enter
   Grouping mode; lighthead will display short (single or double) flashes:

   • Single flash = Group1

2. Remove the YELLOW wire from +VDC and momentarily apply to + VDC to change Groups:
   Heads in the same Group flash together.

3. Group1 Heads alternate with Group2 Heads

4. Double flash = Group2 Heads

For Flash Patterns: Momentarily apply +VDC to

YELLOW wire: once for next pattern quick three times to reset to FP#1

NOTE: This unit may not be factory-set at FP#1.

 | Double [2Hz]| 9| Double [SAE]
2| Single [2Hz]| 10| Triple [SAE]
3| Triple [2Hz]| 11| Quad [SAE]
4| Quad [2Hz]| 12| Quint [SAE]
5| Random| 13| Ultra [SAE]
6| Steady| 14| Single-Quad
7| Single [SAE, CA13]| 15| Single H/L
8| Mega| 16| Single-Triple-Quint

Universal Bracket (Angle-Adjustable)

L-Bracket (Front)

L-Bracket (Rear)

Documents / Resources

| cell2 ES3 3-LED Narrow Profile Lighthead [pdf] Instruction Manual
ES3 3-LED Narrow Profile Lighthead, ES3, 3-LED Narrow Profile Lighthead, Narrow Profile Lighthead, Profile Lighthead, Lighthead
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>