cell2 OE9 Surface Mount User Manual
- June 9, 2024
- Cell2
Table of Contents
cell2 OE9 Surface Mount
Surface Mount
- Decide mounting location.
- Use mounting foam pad as guideline and drill holes.
- Secure lightheaded with supplied screws.
Note: Suggested mounting is with LEDs facing down.
Momentarily apply + VDC to YELLOW wire:
- once for next pattern
- quickly three times for FP#1
Note: This unit may not be factory set at pattern 1.
| FP# | Flash Patterns |
|---|---|
| 1 | Single (2Hz) |
| 2 | Double (R65) |
| 3 | Triple (2Hz) |
| 4 | Quad (2Hz) |
| 5 | Random |
| 6 | Steady |
| 7 | Single |
| 8 | Mega |
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>