Proscenic M7 Pro Robot Vacuum Cleaner User Guide

Proscenic M7 Pro Robot Vacuum Cleaner

Packing List

Product Description

Host

Host And Sensor

Charging base

Front of the Charging base

The back of the Charging base

Dust box assembly

water tank

Installation Notes

Installing the charging base

Connect the power cord and the charging base is placed against a wall on a flat surface.

• Make sure that there is more than 1 .2 meters in front of the charging base and more than 0.5 meters in the left and right sides to ensure a smooth backfill.
• Do not place the cradle in direct sunlight.

Instructions for use

• Power on/ off
  Press and hold the “ ” button to power on, and the host enters the standby state. After booting, press and hold the “ ” button to shut down.
  Note: When the host is charging on the charging stand, it will automatically turn on, and it cannot be turned off during charging.

• Start/pause
  Under the power-on state, short press the “ ” button to start the whole house cleaning. Press any key to pause while cleaning.
  Note: It is recommended that the sweeping robot start cleaning from the charging stand; When the battery is too low, the cleaning will not start. Please charge and then start cleaning. When the power is insufficient during the cleaning process, the host will automatically return to the charging base for charging. After the battery is fully charged, it will automatically return to the interruption to continue cleaning.

• Charging
  Automatic recharge: The host will automatically return to the charging base to charge after the cleaning is completed or when the battery is insufficient. Manual charging: Press the “ ” button to start recharging; after the host is powered off, you can manually put the host back into the charging base to charge.
  Note: Please make sure the charging pole piece is in good contact.

• Sleep
  If there is no operation for more than 20 minutes, the host will automatically enter into sleep state.
  Note: The host will not enter the sleep state when charging; Automatically shuts down after sleeping to no power.

Connect to the mobile client

1. The phone is connected to WiFi;

2. Scan the QR code below, or search for “ProscenicHome” in the mobile app store to download the app, register and login to the account;
   

3. Add the device on the home page and choose sweeping robot”M7 PRO”;

4. Press and hold the “ ” and “ ” keys for 5 seconds to enter the network configuration;

5. Select the connected WiFi of the phone and enter the WiFi password;

6. Go to the mobile phone WLAN list and select and connect the “Proscenic-XXXX” device hotspot;

7. Return to the APP and wait for the distribution network to complete.

Remote control

Note:

1. To ensure remote control effectively, it is recommended to use it in the front area of the host;
2. The effective distance of the remote control is 8 meters.
   

Water tank

If you need to mop the floor, you can use the water tank. Note: Do not mop the floor on the carpet to avoid wet carpet.

1. Wet the mop with water, attach the mop cloth to the Velcro and tighten it, fill in the water through the water inlet, and close the rubber cover;
   

2. Put the water tank into the host;

3. Short press the host “ ” button or start mopping in the app.

Routine maintenance

Dust box and niter assembly (recommended weekly)

1. Press the dust box release button to remove the dust box;

2. Open the dust box, and dump out the garbage;

3. Open the dust cover and remove the niter such as HEPA and sponge;

4. Shake off the trash on the niter net and use a cleaning brush to clean the dust box and niter;

5. After filling clean water into the dust box, shut off the dust box and shake it to the left and right, and pour out the dirty water. Repeat this step several times until the dust box is cleaned;

6. After drying the filter and dust box, replace the filter and dust box.

Water tank (recommended every time)

1. Press the release button to remove the water tank;

2. Remove the mop cloth, rinse with water and dry it; (If using a disposable mop, discard it directly after use)

3. Pour out the remaining water in the water tank and dry the water tank;

4. After the rag and water tank are dry, put it back for use;

5. Filter of Water tank
   If the amount of water is small or does not produce water, it is recommended to replace the tank filter.

6. Pull out two old filters;

7. Press the new filter element down firmly until it is fastened.

Main brush (recommended weekly)

1. Turn the main unit, press the left and right buckles, and remove the middle sweep cover;
2. Remove the roller brush upwards and clean the entangled hair and rubbish with a cleaning brush;
3. Replace the roller brush and insert the three legs of the middle sweep cover into the slot, press down and fix the buckle.
   Note: Depending on the application, it is recommended to replace the main brush for 6-12 months to ensure the cleaning effect.
   

Side brush (recommended weekly)

1. Use a screwdriver to unscrew the 2 side brush screws and remove the 2 side brushes;
2. After cleaning the wrap hair and rubbish on the side brush, replace the side brush.
   Note: Depending on the application, it is recommended to replace the side brush for 3-6 months to ensure the cleaning effect.
   

Host and sensor (recommended monthly)

Wipe the sensor on the main unit with a soft, dry cloth, including:

1. 4 cliff sensors at the bottom of the main unit
2. Wall sensor on the right side of the host
3. Infrared auxiliary recharge sensor
4. Charging pole at the bottom of the main unit
   

Charging base (recommended monthly)
Wipe the charging pole of the charging base with a soft, dry cloth.

Universal wheel (recommended monthly cleaning)

1. Flip the main unit and pull out the universal wheel upwards;
2. Clean the hair and dust on the wheel, axle and support;
3. Reinstall the universal wheel and press it tight.
   Note: Wash with water, dry it and put it back.

Basic parameters

Host

Charging base

Troubleshooting

Common problem

Security Information

Use limit

• This product is only used for floor cleaning in the home environment. Do not use it outdoors (such as open balconies), non­ground (such as sofas), commercial or industrial environments, such as non-ground (such as sofas), commercial or industrial environments.
• Do not use in environments where there is liquid or viscous material above 40 C, below 0 C.
• Do not use or operate this product for people with physical, mental or cognitive impairments, including children.
• Do not allow children to use the host as a toy. When working, please supervise children and pets to keep them as far away as possible.
• Please arrange all kinds of wires on the ground before cleaning to avoid the power failure or damage of the appliance caused by the main unit being dragged during cleaning.
• Do not use the lidar cover, main unit cover, and bumper as handling equipment.
• Do not use to clean any burning objects (such as cigarettes that are not extinguished).
• Do not allow the main unit to pick up hard objects or sharp objects (such as decoration waste, glass, nails, etc.).
• Do not wipe the product with a damp cloth or any liquid.
• Do not place heavy objects on the main unit.
• Do not place the cleaning brush in an area that children can touch (the brush head has a sharp blade).
• Do not place the main unit upside down (the laser radar cannot be placed on the ground).
• Do not spill any liquid into the product (the dust box can be cleaned and wiped dry).
• Do not place the hair, fingers, etc. of the body or pet close to the suction port of the main unit while the main unit is working.
• Please use this product according to the instructions of the manual. If any loss or damage is caused by improper use, the user will bear the responsibility.
• If you need to transport the product, please make sure that the main unit is turned off. It is recommended to use the original packaging.
• If it is not used for a long time, please turn off the main unit and put it in a cool and dry place after fully charging.
• Please clean the maintenance main unit and the charging stand during shutdown or power off.

Battery and charging

• Do not use any third-party batteries, power adapters, or charging docks.
• Do not disassemble, repair or modify the battery and charging stand.
• Do not place the cradle near a heat source (such as a radiator).
• Do not wipe the charger with a damp cloth or any liquid.
• Do not discard batteries at will. It is recommended to be disposed of by professional agencies.
• If the power cord is broken or damaged, please stop using it immediately and contact customer service.
• Charge at least once a month to avoid damage to the battery.
• It is forbidden to incinerate products, and the battery may cause explosion.

FCC Statement

1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
2. This device may not cause harmful interference, and
3. This device must accept any interference received, including interference that may cause undesired operation.
4. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body

FAQs

How to clean the dust box?****

The dust box is easy to clean. Just take it out, and you can use a brush or soft cloth to wipe it.

How to clean the water tank?****

The water tank is easy to clean. Just take it out, and you can use a brush or soft cloth to wipe it.

How long does the battery last?****

The battery lasts for about 2 hours.

When will the host return to the charging base automatically?****

When the battery power is too low, the host will return to the charging base automatically for charging. When the battery is fully charged, it will resume cleaning from where it left off. If you want to stop cleaning, press any key on the remote control or mobile phone APP, and then the host will return to the charging base for charging.

Why does my robot vacuum cleaner not start cleaning?****

Please make sure that your robot vacuum cleaner is fully charged before using; if not, please charge your robot vacuum cleaner for at least 3 hours before using. If you still cannot get your robot vacuum cleaner started after charging for 3 hours, please contact our customer service center (http://www .proscenic-robot-vacuum.com/en/support/contact-us/) for assistance.

How much time does robot vacuum save?****

The majority of robot vacuum manufacturers advise emptying the dustbins of their machines after each cleaning session. With their Roomba and Botvac models, iRobot and Neato both advise doing this.

Why do we need robotic vacuum cleaner?****

Robotic vacuum cleaners are reasonably priced and effective. Compared to pricey housekeepers, they are far less expensive. The equipment requires little maintenance and may be programmed to clean precisely as needed. The only thing you have to do is occasionally empty the container or replace the bag.

Do you need WiFi for a robot vacuum cleaner?****

Your DEEBOT robot vacuum can still function without WiFi. You cannot, however, schedule through the ECOVACS Home app or remotely purchase and manage your cleaner.

What sensor does robot vacuum use?****

Both infrared and photocell sensors are found in a Roomba, and they operate together to clean a room. Even when cleaning after dark and with little natural light, the Roomba vacuum can identify an object’s presence by reflecting light off it. This is made possible by the infrared sensor located in the very front of the machine.

How long do robot vacuums battery last?****

The number of cycles varies depending on the climate and how frequently you use your robot vacuum. According to our research, a lithium battery can withstand 1,500–2,000 cycles or up to five years, compared to a nickel battery’s 400–400 cycles or up to two years.

Video

Download PDF Link;Proscenic Robot Vacuum Cleaner pdf

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>