PROSCENIC F20 Cordless Wet Dry Vacuum Cleaner User Guide
- June 8, 2024
- Proscenic
Table of Contents
F20 Cordless Wet Dry Vacuum Cleaner
User Guide
APP DOWNLOAD AND CONNECTION GUIDE
Search for Proscenic APP on App Store (IOS devices) or Google Play (Android devices). Or you could scan the QR Code below to download the APP.http://www.utenic.com/qr/support/ProscenicAPP/
Step 1:
Once the unit has been assembled, ensure that it is fully charged and press
the power button to switch it on.
Note: The device can be connected to the internet when it’s charging.
Step 2:
Press and hold the power button for 5 seconds to enter pairing mode or reset
WiFi. 
BLUETOOTH CONNECTION
Step 1: Open the app, turn on Bluetooth and WiFi on your phone, search
for the nearby devices.
Step 2: Select a network to connect your
device to. (Only 2.4G Wi-Fi networks are supported)
Step 3: Connecting. (The Wi-Fi light flashes fast in white four
times/sec.)
Step 4: Connection is completed, start using
the device. (The Wi-Fi light is always on in white.)
MANUAL CONNECTION
Step 1: Select a network to connect your device to. (Only 2.4G Wi-Fi
networks are supported)
Step 2: Go to Settings – WLAN list to
connect to the device’s hotspot “Proscenic-XXX”.
Step 3: Connecting. (The Wi-Fi light flashes fast in white four
times/sec.)
Step 4:
Connection is completed, start using the device. (The Wi-Fi light is always on
in white.)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>