Cell2 WLK 8-inch Round Interior Light User Manual
- June 9, 2024
- Cell2
Table of Contents
WLK 8-inch Round Interior Light
User Manual
WLK 8-inch Round Interior Light
To properly install this light, you must have a good understanding of
automotive electrical procedures and systems, along with proficiency in the
installation and use of safety warning equipment.
WIRING
OPERATION
Each unit may be operated in one of the two modes:
Operating in Bright Mode:
With the black wire connected to chassis ground, connect the red wire to
+12VDC to illuminate the light at full intensity (Bright mode).
Operating in Dim Mode:
With the black wire connected to chassis ground, connect the white wire to
+12VDC to illuminate the light in Dim Mode.
NOTE: Bright Mode has priority over Dim Mode.
INSTALLATION
- Create a Ø7.00″ (178mm) cut-out on the selected mounting surface.
- Make all wiring connections.
- A Push the 4 snap-springs inward B, and insert the light into cut-out; the snap-springs will fix the light into the position.
- Test for proper operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>