eufy RoboVac X8 Hybrid Smart Robot Vacuum or Mop Cleaner User Guide
- June 9, 2024
- Eufy
Table of Contents
RoboVac X8 Hybrid Smart Robot Vacuum or Mop Cleaner
Using Your RoboVac
1
2
— .____
If you cannot remove the objects surrounding the Charging Base, check whether
RoboVac can return without assistance; if not, contact eufy customer service
for help.
…
3
– Always keep the Charging Base plugged in, otherwise RoboVac will not automatically return. – When the Charging Base is connected to AC power, the LED indicator on the Charging Base is SOLID WHITE.
4
5
Fully charge RoboVac before use. The LED indicator on RoboVac pulses orange while charging, and is solid blue when fully charged.
EufyHome
0
~
GETITON
~· Google Play
Download the EufyHome app and follow the in-app instructions to complete the Wi-Fi connection. You then will be able to control RoboVac via this app. Refer to the Owner’s Manual for details.
Using Mopping System
1
2
–~ –
~
,,,
– , – Attach the waterproof pad to the charging base. Wet the cloth before
mopping.
4
Cleaning and Maintenance
6
7
Important Tips
ly.· When using for the first time, follow RoboVac to observe
Ll.l and resolve any problems that may occur.
A
B
C
D
E
A Remove power cords and small objects from the floor that may entangle
RoboVac.
B Fold tasseled edges of area rugs underneath to prevent tangling RoboVac.
Avoid cleaning very dark-colored high-pile rugs or rugs thicker than 1.02 in /
26 mm as they may cause RoboVac to malfunction.
C The “No-Go” zones that you set may be ineffective in some cases. It is
strongly recommended to place boundary strips (sold separately) in front of
fireplaces and certain areas (i.e. air vents) that may cause damage to RoboVac
if entered.
D Keep RoboVac away from wet areas during cleaning.
E RoboVac may climb on top of objects less than 0.67 in / 17 mm in height.
Remove these objects if possible.
F Anti-drop sensors will prevent RoboVac from tumbling downstairs and steep
drops in most cases. Sensors are less effective if dirty or used on carpeted /
reflective / very dark-colored floors. It is recommended to place physical
barriers to block off areas where RoboVac may fall.
Consejos importantes
Cuando lo use par primera vez, siga al RoboVac para observar y resolver cualquier problema que pueda surgir.
B
C
D
E
A Retire los cables de alimentaci6n y los objetos pequenos del suelo que
puedan enredarse en el RoboVac.
B Doble los bordes con borlas de las alfombras para evitar que el RoboVac se
atasque. Evite limpiar alfombras de pelo alto y colores muy oscuros o
alfombras de mas de 26 mm, ya que pueden hacer que el RoboVac no funcione
correctamente.
C Las zonas de acceso restringido que establezca pueden no ser efectivas en
algunos casos. Se recomienda encarecidamente colocar tiras de delimitaci6n (se
venden por separado) frente a las chimeneas y ciertas areas (por ejemplo,
salidas de aire) que pueden danar el RoboVac si entra en ellas.
D Mantenga el RoboVac alejado de las areas humedas durante la limpieza. E El
RoboVac puede trepar encima de objetos de menos de 17 mm de altura. Retire
estos
objetos si es posible.
F Los sensores anticaida evitaran que el RoboVac se caiga escaleras abajo yen
desniveles abruptos en la mayoria de los casos. Los sensores son menos
efectivos si estan sucios o se usan en suelos alfombrados/reflectantes/de
colores muy oscuros. Se recomienda colocar barreras fisicas para bloquear las
areas por donde el RoboVac podria caerse.
For FAQs and more information, please visit:
http://suppo rt.eufylife.com
0u fy
T2261 51005002930 V01
Owner’s Manual
RoboVac XS Hybrid
Table of Contents
02 Important Safety Instructions
17 AboutYourRoboVac -What’s in the Box RoboVac Anatomy Map Navjgation and
Management
23 Get Started
Important Tips Before Use Preparation Charge Your RoboVac Auto Recharge and
Resume
26 Using Your RoboVac
Turn On/ Off Start Cleaning Use Your RoboVac with the EufyHome App Select a
Cleaning Mode Use Your RoboVac with Amazon Alexa/
the Google Assistant Set Up Virtual Wall/ Boundary Strip
35 Cleaning and Maintenance
Clean the Dust Collector and Filter Clean the Rolling Brush Clean the Side
Brush Clean the Swivel Wheel Clean the Mopping Cloth and Water Tank 41
Troubleshooting Voice Alert 47 Customer Service
Thank you for purchasing RoboVac. Carefully read all the instructions below
before using this device, and keep this manual for future reference.
01
English
Important Safety Instructions
To reduce the risk of injury or damage, keep these instructions at hand when
setting up, using, and maintaining this device.
WARNING SYMBOLS USED
~
This is the safety alert symbol. This symbol alerts you to
i l l potential hazards that could result in property damage
and/or serious bodily harm or death.
.. ——————————–.. ———————.. — —————————————————….
· This device can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning use of this device in a safe way
and understand the hazards involved.
· Children should be supervised to ensure they do not play with this device.
· Cleaning and maintenance shall not be performed by children without adult supervision.
· This device is only to be used with the power supply unit provided.
· Before cleaning or maintaining this device, the plug must
be removed from the outlet.
·
· The battery in this device should only be replaced by a skilled professional.
· When removing the battery, disconnect the device from the supply mains.
· To recharge the battery, only use the detachable adapter (US/CA: GSCU1000S024V24T; UK: GSCB1000S024V24T; AU: GSCS1000S024V24T; EU: GSCV1000S024V24T) provided with this device.
· The battery must be removed before this device is disposed of. To remove the battery, first unscrew
02
I I
English
the screws on the bottom, then remove the back cover. Remove the battery by
disconnecting the quick connector. · The used battery should be placed in a
sealed plastic bag and disposed of safely according to local environmental
regulations. · The external flexible cable or cord of the power supply unit
cannot be replaced; if the cord is damaged, the power supply unit should be
disposed of. · This device is for indoor use only. · This device is not a toy.
Do not sit or stand on this device. Small children and pets should be
supervised when this device is operating. · Store and operate this device in
room temperature environments only. · Do not use this device to pick up
anything that is burning or smoking. · Do not use this device to clean up
spills of bleach, paint, chemicals, or anything wet. · Before using this
device, pick up objects like clothing and loose paper. Lift up cords for
blinds or curtains. Move power cords, sharp-pointed and fragile objects out of
the way. If this device passes over a power cord and drags it, an object could
be pulled off a table or shelf. · If the room to be cleaned has a balcony, a
physical barrier should be used to prevent access to the balcony and to ensure
safe operation. · Do not place anything on top of this device.
· Be aware that this device moves around on its own . Take care when walking
in the area where this device is operating to avoid stepping on it.
· Do not operate this device in areas with exposed electrical outlets on the
floor.
03
English
· Do not expose the electronics of this device, its battery, or the integrated
Charging Base. There are no userserviceable parts inside.
· Do not use this device on an unfinished, unsealed, waxed or rough floor. It
may result in damage to the floor and this device. Use only on hard floor
surfaces or low-pile carpets, and not on carpets with tasseled edges or loose
threads.
· This device has been designed to be used on floors without scratching them.
We still recommend that you test this device on a small area of the room to be
cleaned to ensure no scratches are made before cleaning the whole room.
· Only use attachments recommended or described in this manual.
· Do not handle the appliance or plug with wet hands. · Ensure that the dust
collector and/or filters are correctly
in-place before usage. · Do not use a battery pack or appliance that is
damaged
or modified. Damaged or modified batteries may exhibit unpredictable behavior
resulting in fire, explosion, or risk of injury. · Do not expose the battery
pack or appliance to fire or excessive temperature. Exposure to fire or
temperature above 130°C may cause an explosion. · Do not modify or attempt to
repair the appliance or the battery pack (as applicable), except as indicated
in the instructions for use and care. · Follow all charging instructions and
do not charge the battery pack or appliance outside of the temperature range
specified in the instructions. Charging improperly or at temperatures outside
of the specified range may damage the battery and increase the risk of fire. ·
The laser distance sensor of this device meets the standards for Class I Laser
Products in IEC 60825-1:2014 and will not generate hazardous laser radiation.
04
English
Notice
–
This symbol on the device or its packaging indicates:
Do not dispose of electrical appliances as unsorted municipal waste; use
separate collection facilities.
Contact your local authority for information
regarding the collection systems available. If
electrical appliances are disposed of in landfills or
dumps, hazardous substances can leak into the
groundwater and get into the food chain, damaging
your health and well-being. When replacing old
appliances w.ith new ones, the retailer is legally
obliged to take back your old appliance for disposal
at least free of charge.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
05
English
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures: (1) Reorient or relocate the receiving antenna. (2)
Increase the separation between the equipment and receiver. (3) Connect the
equipment into an outlet on a circuit different from that to which the
receiver is connected. (4) Consult the dealer or an experienced radio/ TV
technician for help.
ISED Compliance Statement
This device contains licence-exempt transmitter(s)/ receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions:
1. This device may not cause interference.
2. This device must accept any interference, including interference that may
cause undesired operation of the device.
RF Exposure Compliance Statement
This equipment complies with FCC/IC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator and your body.
Declaration of Conformity
This product complies with the radio interference requirements of the European
Community. Hereby, Anker Innovations Limited declares that the radio equipment
type T2261 is in compliance with Directive 2014/53/EU. The full text of the EU
declaration of conformity is available at the following internet address:
https://www.eufylife.com/.
06
English
Maximum output power: 18 dBm (For EU) Frequency band: 2.4G band (2.4000GHz –
2.4835GHz)
GB Declaration of Conformity
Hereby, Anker Innovations Limited declares that the product type T2261 is in
compliance with Radio Equipment Regulations 2017 and The Restriction of the
Use of Certain Hazardous Substances in Electrical and Electronic Equipment
Regulations 2012. The full text of the GB declaration of conformity is
available at the following internet address: https://www.eufy.com.
Trademark Notice
· Amazon, Echo, Alexa and all related logos are trademarks of Amazon.com, Inc.
or its affiliates.
· Apple and the Apple logo are trademarks of Apple Inc., registered in the
U.S. and other countries. App Store is a service mark of Apple Inc.,
registered in the U.S. and other countries.
· Google Play and the Google Play logo are trademarks of Google Inc.
· Google Home is a trademark of Google Inc.
07
English
AUSTRALIA & NEW ZEALAND WARRANTY
This document details the terms and conditions of the warranty provided with
this product. Please disregard any other representations contained on this
product’s packaging or provided with this product, which constitute or appear
to constitute a warranty.
Subject to the exclusions and limitations set out below, we warrant to you
that if you purchase a product directly from us, or, from any of our
authorized resellers, that it will not contain defects which are a result of
faulty manufacturer workmanship or materials. This warranty subsists for 15
months from the date of purchase. This warranty is
provided in addition to your rights under the Australian &
New Zealand Consumer Law.
Subject to any rights you have under the Australian &
New Zealand Consumer Law, we will not be liable for defects which are a result
of damage or loss caused by factors beyond our control, any product which has
not been maintained according to any care or maintenance instructions provided
with the product, any alterations to a product which are not performed by us,
or damage or defects caused to the product due to unusual or nonrecommended
use. We will not be liable for any special, indirect, consequential or
economic loss or damage or loss of profits whatsoever suffered by you or any
other person resulting from any act or omission by us. Our total liability in
respect of this Warranty against Defects is limited to the replacement of the
goods.
This Warranty against Defects is provided in addition to other rights and
remedies that you may have at law. Our goods come with guarantees that cannot
be excluded under the Australian Consumer Law. You are entitled to a
replacement or refund for a major failure and for compensation for any
reasonably foreseeable loss or
08
English
damage. You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount to a
major failure. In order to claim the warranty, you must return the product to
the retailer from which it was purchased or if that retailer is part of a
National network, a store within that chain, along with satisfactory proof of
purchase. The retailer will then return the goods to Directed Electronics
Australia authorized by Anker Innovations Limited. Directed Electronics
Australia will repair, replace or refurbish the product at its discretion. The
retailer will contact you when the product is ready for collection. All costs
involved in claiming this warranty, including the cost of the retailer sending
the product to Directed Electronics Australia, will be borne by you. This
warranty is offered by Directed Electronics Australia. Customer service
support number ( +61) 3 8331 4800 Mon-Fri 8:30am – 5:00pm (AEST) and customer
service email address service@myeufy.com.au.
09
AboutYourRoboVac
What’s in the Box
English
RoboVac
Charging Base
Power Adapter
11111 11111
0
Additional Filter
Additional Side Brush
Cable Ties (xS)
Water Tank
Washable Mopping Cloth
Disposable Mopping Cloths (xS)
Waterproof Pad
Owner’s Manual & Other Documents
17
English
RoboVac Anatomy
A. Top & Side
Bumper ——-:;:;.~:§~~;;;;;…:_
Wi-Fi status light
Laser distance sensor —-+-i’+—(LDS)
¥ Recharge button
· Press to return RoboVac to the Charging Base; press again to pause
<.!.> Auto cleaning Start/ Pause button · Press and hold for 3 seconds to turn
on or off (when not in Charging status) · Press to start Auto cleaning · Press
to pause the current task when working
C!I Spot cleaning button
· Press to start Spot cleaning
c.J &¥ · Press and hold both buttons
for 5 seconds to restore factory settings
Dust collector release button Water tank
Washable Dust collector Ventilation holes cleaning cloth
B. Bottom
Drop sensors
Front infrared sensor
Rolling brush Brush guard Water tank
18
C. Dust Collector
Cleaning tool
~
D. Suction Inlet
Dust collector
..
[ J
Suction inlet
E. Charging Base
Status light
Charging contact pins
English
Filter
Suction inlet Wire slot exit Power cord storage compartment Slot winding
19
English
F. Water Tank
Washable cleaning cloth
Water tank filter Cloth attachment area
Snap joints
Water inlet cover Water inlet
Snap joints
20
I
English
Buttons & Indicators
~, (· I © I
(!)
..
¥
ul
Turn on/ off (Press and hold for 3 seconds)
Start I Paused Cleaning
· Solid blue: standby, cleaning, paused cleaning, returning to charging base
or fully charged
· Solid orange: working in low battery status · Pulsing orange (when docked to
Charging Base): charging · Flashing red: error
- Refer to the “Troubleshooting> Voice Alert” section in this manual for solutions.
Returning to Charging Base · Flashing blue slowly: returning to Charging Base · Solid blue: standby or paused
Start/ Paused Spot Cleaning · Flashing blue slowly: Spot Mode · Solid blue: standby or paused
.··················································-···························–··························.
· When you use the Find My Robot function via the EufyHome app, all three LED
indicators are solid blue and a voice prompt is heard.
· To conserve power, the blue light on the buttons becomes dim when:
· RoboVac is not docked to the Charging Base and has been inactive for 10
minutes;
. · RoboVac is fully charged for 1 minute.
··…………..·………………………………………·…………………….·…..··…..·····
~ (Wi-Fi Status Light) Slowly flashing blue Rapidly flashing blue Solid blue
Status Waiting for connection Connecting with your wireless router Connected to your wireless router
21
English
Map Navigation and Management
Navigation
Once Auto cleaning starts, RoboVac moves from the Charging Base, automatically scans to generate maps, intelligently determines its cleaning route, and divides the space into zones. The cleaning paths are planned along the walls, following a Z-shaped cleaning method to complete the cleaning of each zone one by one.
__ _____ —————r————–,
__,)
)
_____ (
(
__,)
)
_____ (
(
__,)
)
(
(——–
·~—–––––—––—-~–)~1I -~ ––––—––––—-~–)~-
Real-time Mapping & Floor plan
Real-time mapping helps RoboVac to learn the correct cleaning path and the
environment of your home easily. A floor plan will be built after cleaning.
The map will be updated in real-time during each cleaning session to ensure
normal navigation. To create a complete floor plan:
1. Open your doors so that RoboVac can map each room. 2. Remove any objects
that may be in the way or that might entangle RoboVac.
Repositioning & Remapping
If the position of RoboVac / Charging Base is adjusted or the surroundings are
changed significantly, RoboVac will try to reposition and remap to match the
surroundings. · If the repositioning is successful, RoboVac will resume
cleaning. · If the repositioning fails, RoboVac will remap to ensure normal
navigation with a new
cleaning.
22
English
·………·……………………········..·.····.·…………………….·.···…………·………·
. … · When using for the first time, make sure RoboVac starts cleaning from
the
-t- … Charging Base.
· During cleaning, do not move RoboVac frequently. If moved, place RoboVac :
. back to the original position.
j
·…………………………………………………………………………………………..·
Get Started
Important Tips Before Use
X
X
X
CD
0
Q Remove power cords and small objects from the floor that may entangle
RoboVac.
Use the supplied cable ties to organize your wires and power cords.
G) Fold tasseled edges of area rugs underneath to prevent tangling RoboVac.
Avoid
cleaning very dark-colored high-pile rugs or rugs thicker than 1.02 in/ 26 mm
as
they may cause RoboVac to malfunction.
8 The “No-Go” zones that you set may be ineffective in some cases. It is
strongly
recommended to place boundary strips (sold separately) in front of fireplaces
and certain areas (i.e. air vents) that may cause damage to RoboVac if
entered.
G) Keep RoboVac away from wet areas during cleaning..
0 RoboVac may climb on top of objects less than 0.67 in/ 17 mm in height.
Remove
these objects if possible.
0 Anti-drop sensors will prevent RoboVac from tumbling downstairs and steep
drops
in most cases. Sensors are less effective if dirty or used on
carpeted/reflective/very dark-colored floors. It is recommended to place
physical barriers to block off areas where RoboVac may fall.
23
English
Preparation
0 Remove the foam blocks beside the bumper before use.
f ) Place the Charging Base on a level surface and against a wall.
l
l
0 Remove objects within 3 ft/ 1 m of the left and right side and within 6 ft/
2 m of
the front of the Charging Base. If you cannot remove the objects, move RoboVac
to a new place and check whether RoboVac can return to the Charging Base
normally; if not, contact eufy customer service for help.
..
0 Connect the adapter to the Charging Base and a wa ll outlet.
When the Charging Base connects to AC power, the LED indicator on the Charging
Base 1s SOLID WHITE.
24
‘
English
. …. ·…………………………………………………………………………………………..· ~ · Install the Charging Base in a location that RoboVac can easily access. It is recommended to place the Charging Base against a wall, and on a hard-level surface rather than on rugs or carpets.
· Always keep the Charging Base plugged in, otherwise RoboVac will not
automatically return to it.
· To ensure proper charging, do not frequently move the Charging Base
When its location is changed, RoboVac may remap due to repositioning
failure (see About Your RoboVac > Map Navigation and Management
.
for details).
.
·-······-·················-························——–·–············································
Charge Your RoboVac
· Make sure RoboVac is fully charged before use.
· RoboVac will return to the Charging Base at the end of a cleaning cycle or
when its battery is running low.
Method 1: Attach RoboVac to the Charging Base by aligning its charging pins
with the charging pins on the base.
f f Method 2: Press on the main unit or tap the icon in the EufyHome app to
send
RoboVac to the Charging Base.
25
English
. .
·······················································································-··················
· If RoboVac is not used for a long time, to preserve the battery’s lifespan,
recharge at least once every 6 months.
· When RoboVac is being charged, to enter Reduced Power Standby mode
for power-saving, simultaneously press and hold the t hree buttons ( <!)
& · & Ci) ) on RoboVac for 10 seconds until the lights turn off. Wi-Fi
is disabled while this mode is active. Press <!) to exit Reduced Power
. . Standby mode.
· . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . ·.· .· . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . ·
Auto Recharge and Resume
RoboVac returns to the Charging Base automatically to recharge when:
· RoboVac has finished cleaning; · Cleaning is not complete and the battery
level becomes low; once recharged to
80% battery capacity, RoboVac will resume and finish the remaining cleaning.
.·
····················································-····················································.
Do not move t he Charging Base during cleani ng, otherwise RoboVac may fail to
return for recharge. If failed, you have to manually attach it t o the
Charging Base. If the Charging Base is moved, start cleaning from the new
location. RoboVac will automatically return when it has finished clean ing.
. ·………..····………….. ..·..·…………….·…········……… .··········.··..·..·.··.·········
Using Your RoboVac
Turn On/ Off
..
· RoboVac turns on automatically when attached to the Charging Base and
connected to power.
· When RoboVac is not on the Charging Base, press and hold <!) for 3 seconds
to
turn on the main unit. Wait until the Power Status Light turns solid blue.
· When RoboVac is not on the Charging Base, press and hold <!) for 3 seconds
again
to turn off the main unit.
Start Cleaning
:··········………………………………………………………………………………………..··············:
j _,,,’- RoboVac cannot start cleaning if the bat tery level is low. In this case,
.
. .j…………..r.e..c..h..a..r.g.e…R…o.b..o.V…a..c…f.i.r.s.t…b.e..f.o..r.e..c..l.e.a..n..i.n..g…………………………………………………..
26
0 Press <.!) to start cleaning in Auto cleaning mode.
RoboVac moves around to scan the environment and builds a map automatically.
English
f ) Press <.!) again to pause cleaning.
Press <.!) to resume cleaning.
When cleaning is paused, docking RoboVac onto the Charging Base will stop the
cleaning.
If cleaning is paused for 10 minutes, RoboVac automatically stops cleaning and
switches to sleep mode.
0 f Press to stop current cleaning and return to the Charging Base.
. … ·…………………………………………………………………………………………..·
; _,,,’- Before cleaning, tidy cables and cords to avoid power interruption or
any
.
.:…………d..a.m..a..g.e…c.a.u..s.e..d..b..y..p..u.l.l.in..g..t.h.e…c.o..r.d..d..u.r.i.n.g..c..l.e.a..n.i.n.g…………………………….
Use Your RoboVac with the EufyHome App
To fully enjoy all the available features, it is recommended to control your
RoboVac via the EufyHome app. Before you start, make sure that: · Your
smartphone or tablet is running iOS 9.0 (or above) or Android 5.0 (or above).
· The 2.4GHz band wireless signal is enabled on your wireless router. · The
Wi-Fi status light on RoboVac is slowly flashing blue. · Your smartphone or
tablet has enabled Bluetooth to ensure a better connection. · RoboVac has
enough power during setup.
27
English
=
‘
El
EufyHome
0
..
_/
·
GETITON
p· Google Play
1. Download the EufyHome app from t he App Store (iOS devices) or Google Play
(And roid devices).
2. Open t he app and create a user account.
3. Tap t he”+” icon to add “RoboVac X8 Hybrid” to your EufyHome account.
4. Fol low the instructions in the app to set up the Wi-Fi connection.
After con necting successfully, you can control RoboVac via the app. With the
app, you can select cleaning at your desired suction level, schedule
cleaning, view the cleaning map, set up “No-Go” zones, check the network
connection status, and access additional features.
Wi-Fi Status Light
~ ~
Slowly flashing blue Rapidly flashing blue
Waiti ng for connection Connecting with your w ireless router
Solid blue
Connectedrwith your wireless router
.········································································-··········-·····················-.
. ·
I
l ,,~ . If RoboVac gets stuck in any space, tap Find My Robot in t he app to find
l. … the machine. This function is available in t he app only.
·······································-································-·································
Reset the Wi-Fi connection
f To reset the Wi-Fi connection, press and hold the two buttons ( and [!I )
simultaneously for 5 seconds until you hear a voice prompt. At the same time,
RoboVac wil l restore the factory default settings.
You will hear a voice prompt when the Wi-Fi connection has been reset, and the
Wi-Fi status light wi ll slowly flash blue. Now you can follow the Wi-Fi
instructions in the eufyHome app to set up the Wi-Fi connection.
28
English
Schedule Cleaning
Wit h the EufyHome app, you can schedule RoboVac to start clean ing at a particular time .
! ,,, .···………—……………………………..—………………………………………..······. You can set the time and cust omize the clean ing schedules from Sunday to j
.:.
Satu rday on the EufyHome app. This funct ion is available in the app only.
..:
···················································································–·····················
Select a Cleaning Mode
·······…….·…·……….····…··……········………···..··……………………………….·
.l g · . You can press (!) at~ny time to pause the current cleaning cycle.
. . ;
· You can also select a cleaning mode via the EufyHome app.
·……………………..·…………………………………………………..··…………….·
Auto Cleaning Mode 1. Press <.!.) to start cleaning in Auto cleaning mode.
2. Press (!) again to pause cleaning.
:··
·
·
··· ‘I
·· ,
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
–
–
–
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
-~
·
l -,- By default, RoboVac starts in Auto cleaning mode w hen it is turned on.
·
. . ·…………………………………………………………………………… ……………..·
29
English
Spot Cleaning Mode
RoboVac int ensively cleans a specific area with a size of 4.9 ft x 4.9 ft/
1.5 m x 1.5 m, useful if there is a concentrated area of dust or debris. When
t he cleaning of a certain zone is finished, it automatica lly returns to t he
Charging Base.
– – – – 4 9 1 1/ 1.S m – – —
Press [iJ to start Spot cleaning.
Room Cleaning Mode (avai~able via the EufyHome app only)
In this mode, your house is automatically divided into several rooms for cleaning in the EufyHome app. You can also customize your room settings in the app. RoboVac will clean the selected rooms only and return t o the Charging Base after cleaning.
.· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ··,
: , ‘, · Start Room cleaning only after RoboVac has created the map.
:
j – , – · It is recommended t hat RoboVac moves from the Charging Base to st art
. . ·
········
·
·
Room clea ning.
··························
·
·
·······
·
·
·
·······
·
·
·······
·
·
·
······
·
··········
·
·
·
·
·
·
·
·
·
··········-·
‘
30
English
Zone Cleaning Mode (available via the EufyHome app only)
In this mode, you can set up a cleaning zone in the EufyHome app. RoboVac will
clean the selected zone only.
Select a Suction Power Level
In the EufyHome app, select a suction power level according to your needs:
· Quiet · Standard (Default) · Turbo · Max
Select BoostlQTM feature
In the EufyHome app, select the BoostlQTM feature according to your needs. RoboVac will automatically increase the suction power if it detects that stronger power is needed to ensure the best clean. BoostlQTM is ideal for cleaning thicker carpets and hard-to-sweep messes, which will reduce the total cleaning time, but increase the noise level. If the vacuuming noise caused by BoostlQTM disturbs you, you can disable this feature.
Use Mopping System
.. ~····—-· · · · · · · ·· ·····—···· ·· · · · · · · · –··· · · · · · · · · · · · – · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·-·- ·· · · · · · · · ····–· The mopping mode is only intended for a clean floor without stubborn stains or liquids. To avoid staining floors, do not use the mopping function when dust is mixed with liquids such as coffee or ink.
· Mopping System cleans best on smooth hard surfaces and may not perform so well on uneven tiles, heavily waxed floors or rough surfaces like slate or brick, which may snag the cleaning pad.
· The mopping mode is not recommended when no one is at home.
· Do not use the mopping mode on a carpeted floor. It is recommended
to set a “No-Mop” zone in the EufyHome app to avoid cleaning the
.
carpeted area.
.
·-·· ······-·······························································································
1. Before mopping, install the waterproof pad under the Charging Base to protect the floor.
31
English
2. Wet the mopping cloth and wring it until it does not drip. Insert the
cloth along t he bracket slot and stick it firmly. · Use either the washable
mopping cloth or the disposable cloth for mopping.
3. Open the water inlet cover to fi ll the water, then close the cover.
. ..
··········································································································
j ,,, · Do not use any cleaning solution other than those specified by eufy,
as it
.:.
may damage RoboVac.
.
·—·-··-·················································–·——————-··························
4 . Install the water tank into the bottom of RoboVac until a click is heard.
,,
. .
.-·········································································································.
: ,,, · The mopping mode is only intended for a clean floor without stubborn
j
stains. To achieve a better mopping effect, it is recommended to clean
. :
the floor with RoboVac three times before installing the mopping
:
.. . module.
:
·………………………………….·..············……….·……………….··.····.·······.·.··
32
English
5. Select a cleani ng mode to start cleaning. RoboVac automatical ly sweeps
and mops in the selected mode.
6. When RoboVac f inishes working and returns to the Charging Base, remove
the wat er tank, empty any remaining water, and clean the mopping clot h to
prevent mi ldew or unpleasant smells. The disposable mopping cloth is for
single-use only. For how to clean and maintain the water t ank, refer to the
“Cleaning and Maintenance” section in this manual.
Use Your RoboVac with Amazon Alexa/ the Google Assistant
Amazon Alexa and the Google Assistant are smart voice assistants that enable
you to control RoboVac with your voice.
Before you start, make sure that:
· RoboVac is attached to the Charging Base to ensure there is enough power.
· RoboVac is connected with the EufyHome app.
· You have an Alexa-enabled device (i.e. Amazon Echo, Echo Dot and Amazon Tap,
Echo Show, Echo Spot) or a device enabled with the Google Assistant (i.e.
Google Home, Google Home Mini). These devices are sold separately.
· The Amazon Alexa app or Google Home app is already installed on your smart
device, and you have created an account.
To control RoboVac with Amazon Alexa or the Google Assistant
1. Open the EufyHome app and tap “Smart Integrations” in the top left.
2. Follow the on-screen instructions to comolete the setup.
. . ······················-············
-······································································
.. j ,,, Currently this feature only supports English, German, French, and
. :
Spanish. You can check regu larly if more languages are supported at
.. ·
https://www.eufylife.com/support/.
. . ·………………………………..·………………………………………………………..·
33
English
Set Up Virtual Wall/ Boundary Strip
Virtual Wall (Available on the App Only)
In the EufyHome app, you can set up a “No-Go Zone” or “Virtual Wall” as a
restricted area. This eliminates the need to use physical barriers, including
Boundary Strips. This feature is only designed for dividing the cleaning
zones, not for isolating hazardous areas.
· No-Go Zone: RoboVac will not enter the zone to vacuum.
. .
·.·…V.i.r.t.u..a.l·W…a.l.l.:.R..o..b.o.V.·a.c..w..i.l.l.n..o.t..c.r.o..s·s..th..e..v.i.r.t.u.a..l.w..a..ll……………………………………·
· To set a virtual wall, RoboVac must initially perform a cleaning run to
create a floor plan. · Although a virtual wall is set, RoboVac may still enter
the restricted zone due to repositioning failure or abnormal sensors. · Moving
the device or changing the environment may lose the virtual wall . and cause
mapping to fail and rebuild.
·……………….·…………..····………..·..·………….····………·······…….····..···..·
Boundary Strips
Boundary strips (sold separately) can keep RoboVac away from hazardous areas.
RoboVac will recognize the barriers and will not cross into the blocked-off
area.
1. Identify the area or item you do not want RoboVac to get close to.
2. Place the boundary strips FLAT on the floor or under a rug. · Do not place
the boundary strips under a THICK rug as RoboVac may fail to recognize the
boundary strip.
J
C)
X
-t-.—·-············—-············——-························——–··································. · Make sure the boundary strips are placed on the same surface plane RoboVac is used on.
· If the boundary strips roll up, remove and then re-apply to the floor with
.
adhesive tape. Otherwise the boundary strips may not work well.
.
······················–············——–······························································
34
‘ English
Cleaning and Maintenance
Before cleaning and maintaining, turn off the device and unplug the adapter.
For optimal performance, follow the instructions below to clean and maintain
RoboVac regularly. The cleaning/ replacement frequency will depend on your
RoboVac usage habits.
Recommended Cleaning/ Replacement Frequency
RoboVac Part Cleaning Frequency
Dust Collector After each use
Filter Rolling Brush
.. Once every week
Once every week
Side Brush
Once every month
.
Brush Guard
Once every month
Sensors
Once every month
Charging Pins Once every month
Swivel Wheel Once every month
Water Tank
After each use
Washable Mopping Cloth
Water Tank Filters
After each use
–
Replacement Frequency
–
Every 3 months Every 6-12 months Every 3-6 months (or when visibly worn) Every
3-6 months (or when the silicone rubber strip on t he brush guard becomes
visibly worn)
–
–
–
–
Every 6 months (or when they become yellow)
35
English
Clean the Dust Collector and Filter
0 Press the dust collector release button to pull the dust collector out.
f ) Open and empty the dust collector.
@ Remove the filter.
0 Clean the dust collector and filter with the cleaning brush.
..
0 Rinse the dust collector and filter thoroughly with water.
u1min~
36
0 Air-dry the dust collector and filter completely before next use. You may use another filter if the original one is not dry.
English
..
f ) Place the filter back into the dust collector.
e Push the dust collector back into the main unit.
Clean the Rolling Brush
0 Pull on the release tabs to unlock the brush guard as shown.
f ) Lift the rolling brush to remove.
0 Clean the rolling brush with the cleaning tool. 0 Reinstall the rolling
brush by inserting the fixed protruding end first and then
clicking into place.
0 Press down to snap the brush guard into place.
37
English
0
Clean the Side Brush
Foreign substances, such as hair, can easily get tangled in the side brush,
and dirt may adhere to it. Be sure to clean it regularly
0 Use a Phillips screwdriver to unscrew the screw on the side brush.
f ) Remove the side brush.
38
English
e Carefully unwind and pull off any hair or string that is wrapped between the
main unit and the side brush.
0 Clean the side brush with water.
-·
· ·.
l -,- : ‘ I, Only use the side brush when it is completely dry.
.
. ! :
~——······-···–··········–·····-···············································-·····················
Replace the Side Brush
The side brushes may become bent or damaged after being used for a period of
time. Follow the instructions below to replace it.
0 Use a Phillips screwdriver to unscrew the screw on the side brush. 8 Pull
off the old side brush and snap the new one into place.
9 Screw down the screw to fasten the side brush.
39
English
Clean the Sensors and Charging Pins
To maintain the best performance, clean the drop sensors and charging pins
regularly. · Dust off the sensors and charging contact pins using a cloth or
cleaning brush.
Clean the Swivel Wheel
Hair or dust particles can easily get entangled in the swivel wheel. Be sure
to clean the swivel wheel periodically and as needed.
0 Pull out the swivel wheel.
..
40
English
f ) Clean any hair or debris wrapped around the wheel or entangled inside the
wheel
cavity.
8 Reinstall the wheel and push in until it clicks into place.
. .
:···’··I·,···············································································-··——············:
l -,- j Do not clean the swivel wheel with water.
·……………………….·….··……………………………………………………………·
Clean the Mopping Cloth and Water Tank
It is recommended to clean the washable mopping cloth and water tank after
each use.
-·-I , I’
0 After each use, remove the mopping cloth from the water tank.
f ) Rinse the mopping cloth and water tank thoroughly with water.
@ Air-dry the mopping cloth and water tank completely to prevent mildew or
unpleasant smells.
0 To discard your single-use mopping cloth, remove and drop it into a trash
container.
Troubleshooting
The solutions below are for general questions. If your problem persists, visit www. eufylife.com, go to EufyHome app, or contact support@eufylife.com for help.
Problems
Solutions
RoboVac suddenly produces a loud noise.
· Adjust the suction power level in the EufyHome app.
· Check if the rolling brush, filter, dust collector, suction inlet, or wheels
are stuck.
· Make sure the filter and the brush guard have been properly installed.
41
English
Problems
The map is lost or rebuilt even after a floor plan is created.
Solutions
· If the position of RoboVac / Charging Base is adjusted or the surroundings
are changed, RoboVac will try to reposition and remap to match the
surroundings.
· Place RoboVac back on the Charging Base and start a new cleaning session.
RoboVac cannot be activated.
RoboVac suddenly stops working.
· Make sure RoboVac is connected to a power source. · Make sure the battery is
fully charged.
· Press and hold the (!) button for 3 seconds to turn on
RoboVac.
· Check if RoboVac is trapped or stuck on an obstacle. · Check if the battery
level is too low. · Check if RoboVac has alerted you with any voice prompts
or LED indicators. Refer to the “Voice Alert” section in this manual. · If you
still have trouble, turn off RoboVac, wait for 3 seconds, and then turn it
back on.
You cannot schedule cleanings.
· Make sure RoboVac is turned on. · You can set the time of day and scheduled
cleaning time
via the EufyHome app. · Make sure the scheduled time has been set correctly. ·
Check if RoboVac’s power is too low to start cleaning. · RoboVac will not
start a scheduled cleaning while already
performing a cleaning task.
· Check if any obstructions are bloc.k, ing the suction inlet.
· Empty the dust collector
· Clean the filter with water. Suction power is weak.
· Select the max suction power level in the EufyHome app.
· Check if the filter is wet due to watE;r or other liquid on the floor. Air-
dry the filter completely before use.
RoboVac cannot be charged.
· Check if the LED indicator on the Charging Base lights up (when RoboVac is
not on the Charging Base). If not, reconnect the adapter with the Charging
Base and try a new power outlet. If the problem still persists, contact the
eufy service center to repair or replace the Charging Base.
· Dust off the charging contact pins with a dry cloth.
42
English
@ Clean any hair or debris wrapped around the wheel or entangled inside the wheel
cavity.
0 Reinstall the wheel and push in until it clicks into place.
. . t -,- :···’··’·,························-····················-······················································:
Do not clean the swivel wheel with water.
:
·…….·…·…..·.···……………………………………………………………………….·
Clean the Mopping Cloth and Water Tank
It is recommended to clean the washable mopping cloth and water tank after
each use.
-·-I , I’
0 After each use, remove the mopping cloth from the water tank.
@ Rinse the mopping cloth and water tank thoroughly with water.
0 Air-dry the mopping cloth and water tank completely to prevent mildew or
unpleasant smells.
0 To discard your single-use mopping cloth, remove and drop it into a trash
container.
Troubleshooting
The solutions below are for general questions. If your problem persists, visit www. eufylife.com, go to EufyHome app, or contact support@eufylife.com for help.
Problems
Solutions
RoboVac suddenly produces a loud noise.
· Adjust the suction power level in the EufyHome app.
· Check if the rolling brush, filter, dust collector, suction inlet, or wheels
are stuck.
· Make sure the filter and the brush guard have been properly installed.
41
English
Problems
Solutions
· Remove objects within 3 ft/ 1 m to the left and right side and within 6 ft/
2 m of the front of the Charging Base.
RoboVac cannot return · Check if RoboVac is stuck by any objects. to the
Charging Base. · Make sure RoboVac started cleaning from the Charging
Base and was not moved during cleaning.
· Clean the charging contact pins.
The rolling brush does not rotate.
,.
· Clean the rolling brush. Remove the hair wrapped around the rolling brush or
entangled in the two ends of the brush.
· Check if the rolling brush and brush guard have been installed properly.
RoboVac’s movements or travel path are abnormal.
· Check if there is any relevant voice prompt. Follow the voice prompt to
solve the problem.
· Clean the sensors carefully with a dry cloth. · Restart RoboVac by turning
RoboVac off and on.
Water does not come out during mopping.
· Make sure there is enough water in the water tank. · Check if the mopping
module is correctly installed. · Check if the water outlets are blocked. If
yes, replace the
water tank filters.
Too much water comes out during mopping.
· Make sure the water tank has been installed properly. · Make sure the water
tank filters are correctly installed in
place.
RoboVac cannot connect to a Wi- Fi network.
· Make sure your Wi-Fi router supports the 2.4GHz and 802.11 b / g / n bands; the 5GHz band is not supported.
· Check if there are any Internet connection problems.
You cannot control RoboVac with Amazon Alexa.
· Check whether you have installed the Amazon Alexa app onto your smart device
and enabled “EufyHome RoboVac” Skill in the Amazon Alexa app. For details,
refer to the “Smart Integrations” page in the EufyHome App.
· Make sure you have a EufyHome account and that it is connected to RoboVac.
· Make sure you are using correct Alexa voice-commands.
43
English
Problems
You cannot control RobeVac with the Google Assistant.
Voice Alert
Solutions
· Check if there are any Internet connection problems. · Check if you have
installed the Google Home app onto
your smart device and initiated the “EufyHome” action in the Google Home app.
For details, refer to the “Smart Integrations” page in the EufyHome App. ·
Check if you are using the proper commands when talking to the Google
Assistant. When making your request, first say the wake words “Ok Google”. ·
Repeat your question. Speak clearly to the Google Assistant.
When RoboVac encounters a problem, the red indicator on RoboVac will flash and
you will hear the relevant voice prompts.
The voice prompts below are only for reference and may be changed slightly
after voice pack updates. Please follow the voice prompts you have heard to
find the cause and solution below.
Voice Prompt
Cause and Solution
Error 1: Front bumper stuck
If the front bumper is stuck, gently push the bumper in repeatedly to dislodge anything trapped inside. If there is nothing there, try moving the device to a new area and restart.
Error 2: Wheel stuck. Check the wheel and move it to a new position
Wheel may be stuck or trapped. Clear any obstacles in the surrounding area and check the wheel for any trapped dust. Move the device to a new position and try again.
Error 3: Side brush stuck
Side brush may be stuck. Please clean it and try again.
Error 4: Rolling brush stuck. Remove the rolling brush, roller joint, roller brush cover,
Remove and clean the
and suction inlet to clean it. Once cleaned, place the
rolling brush
items back into the device and try again.
Error 5: Device trapped.
Device is trapped. Clear any obstacles in the
Clear the surrounding area surrounding area and try again.
Error 6: Device trapped. Reposition the device near the area where the problem occurred
Device may be suspended in air. Move it to a new position close to the original position and try again. If the device is still unable to start, clean the edge sensor and try again.
44
English
Voice Prompt
Cause and Solution
Error 7: Wheel suspended. Wheels may be suspended in air. Move the device to
Please move the device to a a flat surface and a new position close to the original
new position
position then try again.
Error 8: Low battery, shutting down device. Please charge your device
Low Battery; system will shut down. Charge the device and try again.
Error 9: Magnetic Boundary Strip detected. Move device
Device is too close to a strong magnetic field or strip. Move the device to a different area and try again.
to a different area
Error 12: Right wall sensor- Clean the right side wall sensor since it’s covered in
needs cleaning
dust.
Error 13: Device tilted. Please put the device on a flat surface to start
Device may be tilted. Put the device on a flat surface and try again.
Error 14: Please insert dust Put the dust collector and filter back in and confirm
collector and filter.
that they are in place. Then restart the device.
Error 17: Virtual Boundary detected. Move device to a different area
Device is too close to the virtual boundary. Move the device to a new position and try again.
Error 18: Laser cover may be stuck
Pressure sensor for laser cover is stuck. Move the device to a new position and try again.
Error 19: Laser sensor may Laser ranging sensor is covered in dust. Clean it and
be stuck
try again.
Laser sensor is blocked by:
· An empty environment
Error 20: Laser sensor may · Metal mirrors
be blocked
· Or other multi-reflection devices
IRemove any obstacles and move the device to a
I different area.
Error 21: Charging Base blocked by surrounding obstacles
Charging base is blocked by obstacles, clear any obstacles around the charging base and try again.
45
English
Voice Prompt
Cause and Solution
– Open the battery compartment and check whether the battery is connected and restart the device.
Error S1: Battery Error. Refer – Battery Temperature may be too high or low; wait
to Owner’s Manual or App until the battery falls to normal temperatures before
for help
using (0 ° – 40 ° C / 32 ° F -104 ° F)
– If the issue persists, contact customer support for help.
Error S2: Wheel Module Error. Refer to Owner’s Manual or App for help
– Check whether the wheels are stuck or dust is trapped inside before
restarting the device.
– If the issue persists, contact customer support for help.
Error S4: Suction Fan Error. Refer to Owner’s Manual or App for help
– Check whether the fan blades are stuck in an unknown object before
restarting the device.
– Clean the dust collector and filter before restarting the device.
– If the issue persists, contact customer support for help.
Error S5: Rolling Brush Error. Refer to Owner’s Manual or App for help
– Remove and clean the roller brush, roller brush connection, roller brush
cover and suction inlet before restarting the device.
– If the issue persists, contact customer support for help.
Specifications
®
Input Battery Voltage Power Consumption
Battery Type
Dust Collector Capacity Water Tank Capacity Cleaning Time Charging Time
24 V==1 A 14.4 V == 60W 14.4 V == Li-ion 5,200 mAh (Typical) 400ml 250 ml Max. 150 mins 240 – 300 mins
r ‘ j ~lnput 24V_—A1 __
I. ~
. Output
24 V==1 A
46
Customer Service
For tutoria l videos, FAQs, manuals, and more information, please visit:
http://support.eufylife.com.
Contact Us
121 support@eufylife.com
Q www.eufylife.com
..
~ (US) +1 (800) 988 7973 Mon-Fri 6:15 – 17:00 (PT); Sat-Sun 6:30-16:30 (PT)
(UK) +44 (0) 1604 936200 Mon-Sun 6:00 – 17:00; Sat-Sun 6:00-14:00
(DE) +49 (0) 69 9579 7960 Mo-Fr 8:00 – 16:00
*) (B 03 4455 7823 F.l-~ 9:00 – 17:00
For more support phone numbers, please visit:
http://support.eufylife.com/s/phonecontactus Or scan the QR code below:
English
0 O @ @ @EufyOfficial
@Eufy O f f ic ial
@EufyOffic ial
@EufyOfficial
Anke r Innovations Limited Roo m 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong
47
0ufy
For FAQs and more information, please visit:
www. eufyl ife.com
51005002929 T2261 V01
eufy RoboVac – Limited Warranty
NOTE: This limited warranty provided by the manufacturer in no way affects a
potential statutory warranty provided by law.
This One-Year Limited Warranty applies to purchases made from authorized
retailers of Anker Innovations Limited, and implied warranties will be limited
to the duration of this limited warranty. Warranty coverage applies to the
original owner and to the original product only and is not transferable. For
eufy-Certified Refurbished products, a Warranty Period of three (3) months
shall apply and ‘Warranty Period’ shall be read accordingly throughout this
document.
Anker Innovations warrants that the unit shall be free from defects in
material and workmanship for a period of one year from the date of purchase
when it is used under norma l household conditions and maintained accord ing
to the requirements outlined in this instruction manual, subject to the
following conditions and exclusions.
REMEDY
1. The original unit and/or non-wearable components deemed defective,
according to Anker Innovations’ sole discretion, will be repaired or rep laced
for up to one year from the original purchase date.
2. In the rare event that a replacement unit is issued, the warranty coverage
ends ninety (90) days following the receipt date of the replacement unit or
the remainder of the existing warranty, whichever is greater. If the unit is
replaced, Anker Innovations reserves the right to replace the unit with one of
equal or greater value.
EXCLUSION
Unless agreed in writing, the Limited Warranty will not apply if the defect(s)
relate to: 1. Consumable parts such as filters, or brushes etc., that are
subject to normal wear and tear, and
require regular maintenance and/or replacement to ensure the proper
functioning of your unit. 2. Defects caused by rough or inappropriate handling
or use or damage caused by accident, misuse,
neglect, fire, water, lightning or other acts of nature, external sources such
as weather, electrical outages or power surges. 3. Improper operation or
maintenance, use not in accordance with the Product instructions or connection
to improper voltage supply. 4. Negligent use or care, neglect, or careless
operation or misuse of the Product. 5. Accident, abuse, misappl ication, or
any unauthorized repair, modification, or disassembly or opening of the
chassis of the Product. 6. Any failure by Buyer or a third party to comply
with environmental and storage requirements for the Product specified by
Seller. 7. Any failure to adequately package the Product for transportation.
8. If the battery has been short-circuited, if the seals of the battery
enclosure or the cells are broken or show evidence of tampering, or if the
battery has been used in equipment other than that for which it has been
specified. 9 Use of parts not in accordance with the Product instructions. 10.
Use of parts and accessories other than those produced or recommended by eufy
11. Use in a commercial environment as the Product is designed for residential
use only. 12. Consequential and incidental damages.
13. Extreme or external causes beyond our reasonable control including, but
not limited to,
breakdowns, fluctuations, or interruptions in electric power, ISP (internet
service provider)
01
El
service, or wireless networks. 14. Weak and/or inconsistent wireless signal
strength in your home.
15. Any product(s) purchased from unauthorized dealers/resellers.
16. Products used outside the country of purchase.
17. Free products.
18. Lost and/or stolen products.
DISCLAIMER
This Limited Warranty is your sole and exclusive remedy against Anker
Innovations and Anker Innovations’ sole and exclusive liability in respect of
defects in your Product. This Limited Warranty replaces all other Anker
Innovations warranties and liabilities, whether oral, written, (non-mandatory)
statutory, contractual, in tort or otherwise, including, without limitation,
and where permitted by applicable law, any implied conditions, warranties or
other terms as to satisfactory quality or fitness for purpose. However, this
Limited Warranty shall neither exclude nor limit i) any of your legal
(statutory) rights under the applicable national, and state, laws or ii) any
of your rights against the seller of the Product.
TO THE EXTENT PERMITTED BY APPLICABLE LAWS, ANKER INNOVATIONS DOES NOT ASSUME
ANY LIABILITY FOR LOSS OF OR DAMAGE TO OR CORRUPTION OF DATA, FOR ANY LOSS OF
PROFIT, LOSS OF USE OF PRODUCTS OR FUNCTIONALITY, LOSS OF BUSINESS, LOSS OF
CONTRACTS, LOSS OF REVENUES OR LOSS OF ANTICIPATED SAVINGS, INCREASED COSTS OR
EXPENSES OR FOR ANY INDIRECT LOSS OR DAMAGE, CONSEQUENTIAL LOSS OR DAMAGE OR
SPECIAL LOSS OR DAMAGE.
TO THE EXTENT PERMITTED BY APPLICABLE LAWS, ANKER INNOVATIONS’ LIABILITY WILL
BE LIMITED TO THE PURCHASE VALUE OF THE PRODUCT. The above limitations will
not apply in the case of gross negligence or intentional misconduct of Anker
Innovations or in the case of death or personal injury resulting from Anker
Innovations’ proven negligence.
WARRANTY SERVICE
For Retailer Store purchasing If you wish to make a warranty claim, please
contact your local distributor. Upon contacting your distributor, please have
the serial number of your Product ready and the original proof of purchase
from an authorized reseller, showing the date of purchase and full details of
the Product. For Online Store purchasing please reach us by this channel
~ support@eufylife.com
Q www.eufylife.com
~
(US) +1 (800) 988 7973 Mon-Fri 9:00 – 17:00 (PT)
(UK) +44 (0) 1604 936200 Mon-Sun 6:00 – 14:00
(DE) +49 (0) 69 9579 7960
Mo-Fr 6:00 – 11 :00
(t:jJOO) +86 400 0550 036 (B:zl!.l 03 4455 7823
Ja.1-¥:Ja.lli 9:00 – 17:30
,EJ-;t£ 9:00 – 17:00
When calling the customer support center, please have the Amazon order number or eBay username for the purchase of the eufy product from the authorized retailer.
02
(fournisseur de services Internet) ou des reseaux sans fil. 14. Une force de signal sans fil faible et/ou irreguliere dans votre maison. 15. Tout produit achete aupres de fournisseurs/revendeurs non agrees 16. Des produits utilises hors du pays d’achat. 17. Des produits gratuits. 18. Des produits perdus et/ou voles.
AVIS DE NON-RESPONSABILITE
a Cette garantie limitee est votre seul et unique recours l’encontre d’Anker
Innovations, et la seule
et unique responsabilite d’Anker Innovations en ce qui concerne les defauts de
votre produit. Cette garantie limitee remplace toutes les autres garanties et
obligations d’Anker Innovations, qu’elles soient orales, ecrites, legales (non
obligatoires), contractuelles, en responsabilite civile ou autre, y compris,
sans s’y limiter, et lorsque la loi applicable l’autorise, toute condition
implicite,
a a a toute garantie ou toute autre disposition relative la qualite
satisfaisante ou l’adequation
l’usage. Toutefois, cette garantie limitee ne doit ni exclure, ni limiter i)
l’un de vos droits legaux
a (statutaires) en vertu de la legislation locale et nationale en vigueur, ou
ii) vos droits l’encontre
du vendeur du produit.
DANS LA MESURE PERMISE PAR LES LOIS APPLICABLES, ANKER INNOVATIONS N’ACCEPTE
AUCUNE RESPONSABILITE AL’EGARD DE LA PERTE, L’ENDOMMAGEMENT OU LA
CORRUPTION DE DON NEES, TOUTE PERTE DE PROFIT, DE JOUISSANCE DE PRODUITS OU DE
FONCTIONNALITES, TOUTE PERTE COMMERCIALE, TOUTE PERTE DE CONTRATS, DE REVENUS
OU D’ECONOMIES PREVUES, TOUTE AUGMENTATION DES COUTS OU DES DEPENSES, TOUTE
PERTE OU TOUT DOMMAGE INDIRECTS, CONSECUTIFS OU PARTICULIERS. DANS LA MESURE
PERMISE PAR LES LOIS APPLICABLES, LA RESPONSABILITE
D’ANKER INNOVATIONS SERA LIMITEE A LA VALEUR D’ACHAT DU PRODUIT.
Les limitations ci-dessus ne s’appliquent pas en cas de negligence grave ou de
faute intentionnelle d’Anker Innovations ou en cas de deces ou de blessure
resultant d’une negligence averee d’Anker Innovations.
SERVICE DE GARANTIE
Pour l’achat en magasin de detail Si vous souhaitez faire une reclamation de
garantie, veuillez contacter votre distributeur local.
Pour contacter votre distributeur, veuillez vous munir du numero de serie de
votre produit et de la preuve d’achat d’origine aupres d’un revendeur agree,
indiquant la date d’achat et les details complets du produit.
Pour l’achat en ligne veuillez nous contacter par ce canal
~ support@eufylife.com
Q www.eufylife.com
~
(US) +1 (800) 988 7973 Mon-Fri 9:00 – 17:00 (PT)
(UK) +44 (0) 1604 936200 Mon-Sun 6:00 – 14:00
(DE) +49 (0) 69 9579 7960
Mo-Fr 6:00 – 11 :00
(c:p@l]) +86 400 0550 036 (El :zl’;:) 03 4455 7823
ffl]-~/a.lli 9:00 · 17:30
J=l-~ 9:00 – 17:00
Lorsque vous appelez le centre d’assistance clientele, veuillez vous munir du
numero de
a commande Amazon ou du nom d’utilisateur eBay associe l’achat du produit eufy
aupres du
detaillant agree.
NA – 51005001027 V03 04
References
- . Spend less. Smile more.
- eufy | Built with Care | eufy US
- eufy | Built with Care | Up to 54% Off | eufy US
- eufy Support
- eufy | Built with Care | eufy US
- eufy | Built with Care | eufy US
- eufy Support
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>