LUCIDE 45494-06-65 JOANET Hanging Lamp 6xE27 Instruction Manual

LUCIDE 45494-06-65 JOANET Hanging Lamp 6xE27

Thank you

Thank you for purchasing a Lucide original!
This manual will hopefully guide you easily through the installation process. We aim to inspire and illuminate our clients by offering trendy, high-quality and affordable lighting.
Welcome to the community of #illuminates your world

DISCOVER OUR COLLECTION!

Visit our website and discover our entire collection
CURIOUS ABOUT OUR BRAND?

Our brand video gives you a glimpse behind the scenes at Lucide
#ILLUMINATESYOURWORLD

Take a look at how others around the world use Lucide products

Follow us for the latest lighting trends!

Item number: 45494/06/65
EAN code: 5411212451446

RECOMMENDED LUCIDE LIGHT SOURCE

49035/05/62
Dimmable: Yes
Included: No

General

Dimensions L x W x H: 132cm x 41,5cm x 218cm
Height minimum: 50cm
Height maximum: 218cm
Main material: Glass
Ceiling rose material: Metal
Color: Smoke Grey and Matt Gold / Brass
Style: Modern
Shape: Rectangle
Weight: 11,80kg

Installation advise: Take the biggest glass and determine the desired height above your table. According this example you take the same length of the cable between the glass and the canopy

General Specifications

Dimmable: Yes
Light direction: Around (Diffuse)
Adjustable in height : Adjustable In Height (Before Installation)
Directional : Not Directional
Cable : Yes, Cable On Product
Cable length: 160cm
Sensor: Without Sensor
Control: Light Switch Control
Power supply: Adapter/Power Grid
IP-Class : 20
Electric Class : 1 Number of light sources: 6
Lamp socket: E27
Maximum wattage: 40W
Power requirements: 220-240V~50Hz Warranty 2 Years

For more specifications of this product please visit www.lucide.com

TECHNICAL DRAWING & DIMENSIONS

Item number: 45494/06/65
EAN code: 5411212451446

INSTALLATION DRAWING SPECIFICATIONS

Safety Instructions

Please read this notice carefully and keep it during the lifetime of this product. Follow the instructions for a safe and correct installation and functioning of the light fixture. The manufacturer does not accept any responsibility for damage caused by improper installation and service. Installation should always be done by a qualified electrician. Always isolate the power before commencing installation, maintenance or repair. In case of doubts, please contact a qualified electrician. Please pay attention to locations where the item can be installed (indoor, outdoor, bathroom (for outdoor and bathroom installation, please see further). Indoor items cannot be used in humid places. Do not put the item in contact with water or any liquids or inflammable products. Always respect the minimal distance (indicated on the light) to inflammable products.
During installation, make sure that the cables will not be squeezed or damaged by sharp edges. If the external flexible cable is damaged, it needs to be replaced exclusively by the manufacturer, his service agent, or a qualified electrician. This is to avoid all risks.
Because the temperature of the item and the bulbs can get very high, they must cool down before being touched. Always use the correct bulb (respect type and maximal wattage as indicated on the product).

Explanation of the symbols which can appear on the fixture

This item is only suitable for indoor use, exclusive bathroom
(except if a higher IP degree permits that the item can be used in the bathroom).
Legislation requires that all electrical and electronic equipment must be collected for reuse and recycling.
Electrical and electronic equipment marked with this symbol indicating separate collection of such equipment must be returned to a municipal waste collection point.
Class I: The item has an earth connection. The earth wire (green-yellow) needs to be connected to the earth connection (marked with this symbol).
Class II: The item is double insulated and must not be connected to the earth wire.
Class III: The item is only suitable for lower voltage supply and must not be connected to the earth wire.
IP 20: Protection against contact with a finger
If the protection glass is damaged or broken, it needs to be replaced immediately.
Please respect the minimum distance from the bulb to inflammable objects.

Warranty declaration

Lucide NV warrants that the products supplied will be free from defects in material and workmanship for a period of 2 years from the date of purchase by the end user, if the item is installed and maintained properly as mentioned in the user manual.
Exclusions for the warranty:

1. Broken glass parts of the fixture will only be replaced within 14 days after purchasing by the end user.
2. Normal wear and tear, discoloring as a result from normal use.
3. Damage caused by external causes like fire, water, wrong use/ installation or maintenance of the product. For warranty claims the customer needs to hand over defective fixture/part and the original purchase tick

Further explanations can be found on our website.

www.lucide.com

Customer Service

LUCIDE NV
LUCIDE NV BISSCHOPPENHOFLAAN 145, 2100 DEURNE, BELGIUM
info@lucide.com  tel: +32(0)3 366 22 04
www.lucide.com

References

• Lucide lighting - Illuminates your world.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>