Eletorot ‎Q6120 Mini Smart Shower Instruction Manual

Eletorot ‎Q6120 Mini Smart Shower

Specifications

• Voltage: 3.7V
• Max. Electric Flow: 2.6A
• Water flow: 2.5L/min
• Battery Capacity: 2200mAH
• Using time: 45-60min

Frequently Asked Questions

• Q: Can I use the Mini Smart Shower with hot water?
  • A: It is recommended to avoid using hot water with the Mini Smart Shower as it may damage the motor and cord.
• Q: How long does it take to fully charge the battery?
  • A: The charging time can vary depending on the charger used, but typically it takes between 2-5 hours to fully charge the battery.

IMPORTANT SAFETY INSTRUCTIONS

1. PLEASE READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.
2. KNOW HOW TO STOP THE PRODUCT AND BLEED PRESSURES QUICKLY.
3. FOLLOW THE MAINTENANCE INSTRUCTIONS SPECIFIED IN THE MANUAL.
4. OPERATE ONLY WITH WATER WITHIN THE TEMPERATURE RANGE 10°C to 50°C.
5. SHOWER ASSEMBLY INCLUDES SMALL PARTS THAT COULD BE A CHOKING HAZARD.

WARNING: TO REDUCE THE RISK OF INJURY:

1. Do not leave appliance unattended when in use. Switch the unit off and remove from water when not in use.
2. Use only as described in this manual with manufacturers recommended attachments and replacement parts.
3. Do not use the shower with water from the sea, pool or river or with any liquid other than water.
4. Ensure that the base of the pump is fully submerged in water before operation.
5. When the shower is operated by children, proper instruction and attention should be given.
6. Do not use damaged power cord or plug and charge only with correct voltage as listed on the shower plate. Using improper voltage may result in damage to the motor and possible injury to the user.
7. Before use, ensure that that there are no broken or worn parts and that all screws are fully tightened.
8. Keep the shower away from heating or fire.
9. Keep the shower away from freezing. Freezing will damage the motor and cord.
10. Do not remove cover plate or attempt to disassemble your machine. This will void all warranties.

CONTACTS

UK/REP

• COMPANY NAME: GSG CONSULTING GROUP LIMITED
• ADDRESS: Montague houses unit 3 Matthew street Manchester m12 5bb
• EMAIL: GSG–GROUP@outlook.com
• Tel: +44 7850 387628

EC/REP

• COMPANY NAME: MARWAY
• ADDRESS: Am Maibusch 108-110, 45883, Gelsenkirchen, Germany
• EMAIL: MARWAY.UG@outlook.com
• Tel: 004917645084650

IMPORTER

• COMPANY NAME: shenzhenshi ruijiyao E- Commerce Co., Ltd
• ADDRESS: CN,518000, Guangdong, shenzhen, Nanshan Qu xilijiedao xinweishequ IiiuxianQlinQcun iinQweidasha A602
• Trademark: Eletorot
• Model No.: GFS-1701
• Product name: Rechargeable Portable Camp Shower

MANUFACTURER

• COMPANY NAME: Shenzhen Daijiali ELECTRONIC&TECHNOLOGY CO., LTD
• ADDRESS: 5#YanUk village Dalingshan Town DongGuan City Guangdong Province

FEATURES

1. Filter cover
2. Filter
3. Pump
4. O-ring
5. Outlet connector
6. Battery Supply
7. Shower Head
8. Holder
9. Hook
10. Suction cup
11. USB Charging Cord

HOW TO ASSEMBLE AND OPERATE

HOW TO ASSEMBLE

• Insert O-ring (4) into outlet connector (5)
• Attach outlet connector (5) to shower head (7) and tighten by turning anti-clockwise.
• Plug in the power cord to the socket of batter supply (6)

HOW TO OPERATE

1. Immerse pump (3) into water.
2. Push on/off switch on battery supply (6) to start.
3. Position shower head using supplied hook (9) or holder (8). The battery(6) can be attached on the hose.

IMPORTANT：

1. Do not remove the pump from water when operating. Power off the pump before removing.
2. Ensure the shower head is securely mounted before use.

HOW TO RECHARGE

• Remove the battery supply (6) from main device
• Recharge it with the USB cord (11) provided in the package, plug the USB cord (11) into the socket of battery supply (6).
  • Note: charging indication
  • LED flashing: in charging
  • LED stays on: fully charged
• Plug USB charging cord (11) into:
  • Mobile phone charger (2.5h)
  • USB output from car (2.5h)
  • USB output from laptop (5h)
    (approximate charging time)

GENERAL MAINTENANCE

FOR SHOWER DEVICE

1. Unattached the shower device

1. Stop the device by pressing the on/off switch on battery supply (6).
2. Take out the pump (3) from water and detach shower head (7). Drain any water from hose.
3. Remove O-ring (4) from outlet connector (5) and store safely.

IMPORTANT

• Please store the pump away from high temperature, freezing, flammable & explosive goods.

Filter Cleaning

• Remove filter cover (1)
• Clean the filter (2) and filter cover (1)
• Replace filter (2) and filter cover (1)

BATTERY USAGE

1. Keep the stiffener of the power cord and the triangle mark of the charging port in line, plug power cord into charging port and turn left or right to lock it.
2. Press the switch 3 seconds to turn on the battery and the light turns on. Press again to turn off the battery and the light turns off.
3. The light shines to show the remaining battery capacity when press the switch lightly. once means 25% battery left, twice means 50% battery left, 3 times means 75% battery left,4 times means the battery is full.
4. The two LED lights keep flashing alternately to indicate that the battery level is less than 25%, charge it in time.
5. The LED lights keep flashing quickly to indicate that charging voltage is too high (beyond 6.5V).

FOR BATTERY SUPPLY

1. We recommend charging the battery to SOC 40%-50% after each use to ensure the maximum battery life. Please charge before using for the first time.
2. Please recharge the battery at least every three months to ensure it remains in a SOC 40%-50% – the battery will deplete when stored for long periods.
3. Do not charge the battery beyond output specification the products required (Output: 5V / 0.5-2A.).
4. Store away from high temperatures or flammable & explosive goods.

SPECIFICATION

Supply included
Battery Capacity:| 2200mAH| Charging way:| Any USB output of 5V, 0.5-2A
Using time:| 45-60min| Charging time:| 2-5H (Depend on spec. of different charger)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>