Cell2 R0 Surface Mount Scene Lamp User Manual
- June 9, 2024
- Cell2
Table of Contents
R0 Surface Mount Scene Lamp
User Manual
R0 Surface Mount Scene Lamp
WIRING:
To +VDC(fuse rating @ 0.5A)……………………………………………… RED
To Vehicle Chassis Ground: ……………………………………………….. ..BLACK
(For steady-bum models, external flasher may be used for waming purpose.)
INSTALLATION
(Actual mounting kit will be based on the ordered model) Surface mount Standard Flange
45° Angled Flange
- Place the lighthead on to the selected surface and mark the two screws mounting position.
- Drill a wire access cut-out (suggested diameter @ 0.23″ [6.0mm]) on the selected mounting surface between the two screw marks.
- Lead the wires through the foam pad and the cut-out.
- Make all necessary connections.
- Align mounting holes with the foam pad and tighten both screws.
Read User Manual Online (PDF format)
Loading......