icp PCIE-Q470 Full-size PICMG 1.3 CPU Card Installation Guide

icp PCIE-Q470 Full-size PICMG 1.3 CPU Card

Package List

PCIE-Q470 package includes the following items

• 1 x PCIE-Q470 single board computer
• 1 x SATA cable
• 1 x Mini jumper pack
• 1 x QIG

Specifications

• CPU:
  10th/11th Generation LGA1200 Intel® Core™ i9/i7/i5/i3, Pentium® and Celeron® processors

• Chipset:
  Intel® Q470

• Memory :
  Four 288-pin 2933 MHz dual-channel DDR4 DIMM slots supporting up to 128 GB memory

• BIOS :
  AMI UEFI BIOS

• Graphics Engine :

  • 10th Generation CML-S: up to Intel® UHD Graphics 630, Intel® HD 9th Generation Display Engine based on 16 low power execution units supporting DX2015, OpenGL 5.X and OpenCL2.x, ES 2.0
  • 11th Generation RKL-SXe: 12th Generation Graphics Architecture, Intel® UHD Graphics 750, supporting 12-bit end-to-end, AV1, VP9, HEVC 12b, HDR10, FP16

• Display Output:
  1 x HDMI 1.4 (up to 4096 x 2160 @ 30 Hz)

• Ethernet:

  • LAN1: Intel® I225V 2.5GbE controller (Colay with I225-LM)
  • LAN2: Intel® I225V 2.5GbE controller (Colay with I225-LM)

• External I/O Interface:

  • 2 x USB 3.2 Gen 1 (5Gb/s) (Type-A)
  • 1 x USB 3.2 Gen 2 (10Gb/s) (Type-C)

• Internal I/O Interface:

  • 4 x SATA 6Gb/s (RAID 0/1/5/10 supported)
  • 6 x USB 2.0 (2×4 pin, p=2.54)
  • 2 x USB 3.2 Gen 1 (5Gb/s) (2×10 pin, p=2.0)
  • 1 x USB 3.2 Gen 1 (Type-A, 180°)
  • 2 x RS-232 (2×5 pin, p=2.0)
  • 2 x RS-422/485 (1×4 pin, p=2.0)

• Audio:
  1 x IAUDIO connector supporting IEI AC-KIT-888S audio module (2×5 pin, p=2.0)

• Front Panel:
  1 x Front panel (2×7 pin, p=2.54; power LED, HDD LED, power button, reset button, speaker)

• LAN LED:
  2 x LAN LED (1×2 pin, p=2.54)

• Expansions:

  • 1 x PCIe x16 signal via golden finger (supporting x16, or x8 + x8, or x4 + x4 + x8)
  • 4 x PCIe x1 signal from PCH via golden finger (supporting one x4, or four x1)
  • 4 x PCI signal via golden finger
  • 1 x M.2 2230 A Key (PCIe x2 & USB 2.0)
  • 1 x M.2 3042/3052 B Key w/ SIM holder (PCIe Gen3 x2)
  • 1 x M.2 2280/2242 M Key on solder side (PCIe x4)

• Digital I/O:
  1 x 12-bit digital I/O (2×7 pin, p=2.0)

• SM Bus:
  1 x SM Bus (1×4 pin, p=1.25)

• I2C:
  1 x I2C (1×4 pin, p=1.25)

• Fan Connector:
  1 x CPU fan connector (1×4 pin)
  1 x System fan connector (1×4 pin)

• Chassis Intrusion:
  1 x Chassis intrusion connector (1×2 pin, p=2.54)

• TPM:
  Intel® PTT (TPM 2.0)

• Power Supply:

  • ATX/AT power supply
  • Support AT/ATX mode
  • ErP/EuP compliant

• Power Consumption:

  • 3.3V@1.04A, 5V@8.61A, 12V@12.33A
  • (Intel® Core™ i9-11900K CPU with 4 GB 3200 MHz DDR4 memory)

• Watchdog Timer:
  Software programmable support 1–255 sec. system reset

• Operation Temperature : 0°C – 60°C

• Storage Temperature : -30°C – 70°C

• Operation Humidity: 5% – 95%, non-condensing

• Dimensions: 338 mm x 126 mm

• Weight : GW:1000 g / NW:500 g

• Safety: CE/FCC compliant

All the drivers and utility for the PCIE-Q470 are available on IEI Resource Download Center. Type PCIE-Q470 and press Enter to find all the relevant software, utilities, and documentation. To install software from the downloaded ISO file, mount the file as a virtual drive to view its content.
IEI Resource Download Center
https://download.ieiworld.com

Ordering Information

• PCIE-Q470-R10:
  Full-size PICMG 1.3 CPU card supports 10th/11th Gen. LGA1200 Intel® Core™ i9/i7/i5/i3, Pentium® and Celeron® processors, Intel® Q470, DDR4 DIMM, HDMI, dual Intel® 2.5GbE, USB 3.2 Gen 2, SATA 6Gb/s, M.2, iAudio and RoHS

• CB-USB02-RS:
  Dual port USB cable with bracket, 300mm, p=2.54

• 32102-000100-200-RS:
  SATA power cable, MOLEX 8981-4M to SATA15P, 150mm

• 32205-002700-200-RS:
  RS-232/422/485 cable, 200mm, p=2.0

• AC-KIT-888S-R10:
  Realtek ALC888S 7.1 Channel HD Audio peripheral board, RoHS

• CF-1150SA-R10
  Special cooler kit for LGA1150, high-performance compatible, 95W

• CF-1150SB-R11
  Special cooler kit for LGA1150, high-performance compatible, 65W

• CF-1150SC-R20
  Special cooler kit for LGA1150, 1U chassis compatible, 65W

• CF-1150SE-R11
  Special cooler kit for LGA1150, high-performance compatible, 95W

Jumpers Setting and Connectors

CHA_DIMM0, CHA_DIMM1
CHB_DIMM0, CHB_DIMM1| DDR4 DIMM slots
DIO1| Digital I/O connector
DBG_SPI1| EC debug connector
CPU_FAN1, SYS_FAN1| Fan connectors
JSPI1| Flash SPI ROM connector
JEC1| Flash EC ROM connector
F_PANEL1| Front panel connector
I2C1| I2C connector
LED_LAN1| LAN1 link LED connector
LED_LAN2| LAN2 link LED connector
M2_A1| M.2 A-key slot
M2_B1| M.2 B-key slot
M2_M1| M.2 M-key slot (on solder side)
PWR_SW1| On-board power switch
COM1, COM2| RS-232 serial port connectors
COM3, COM4| RS-422/485 serial port connectors
S_ATA3, S_ATA4, S_ATA5, S_ATA6| SATA 6Gb/s connectors
SMB1| SMBus connector
SIM1| SIM card slot
JUSB3, JUSB4, JUSB5| Internal USB 2.0 connectors
USB1| Internal USB 3.2 Gen 1 connector (Type-A)
---|---
JUSB3-1| Internal USB 3.2 Gen 1 connector
LAN1, LAN2| External 2.5GbE RJ-45 connectors
HDMI1| External HDMI connector
CN1, CN2| External USB 3.2 Gen 1 connectors
CON1| External USB 3.2 Gen 2 connector

J_ATX_AT1: AT/ATX Power Mode Setting

PIN NO.| DESCRIPTION
Short 1 – 2| ATX Power Mode (default)
Short 2 – 3| AT Power Mode
SW_BIOS1_1: BIOS Selection Switch

PIN NO.| DESCRIPTION
Short A – B| BIOS1: four PCIe x1 slots (default)
Short B – C| BIOS2: one PCIe x4 slot
J_CMOS1: Clear CMOS Jumper

Status| DESCRIPTION
NC| Keep CMOS Setup (Normal Operation)
Press| Clear CMOS Setup
J_FLASH1: Flash Descriptor Security Override Jumper

PIN NO.| DESCRIPTION
Short 1-2| Disabled (default)
Short 2-3| Enabled
USB Power SW: USB Power Setting

USB Power SW| DESCRIPTION
+5V DUAL| Power is provided in S3/S4 sleep state (default)
+5V| Power is not provided in S3/S4 sleep state
Use the USB Power SW BIOS options to configure whether to provide power to the corresponding USB connector(s) when the system is in S3/S4 sleep state. This option is valid only when the above Power Saving Function (ERP) BIOS option is disabled.
CPU12V1: ATX CPU 12V Power Connector

PIN NO.| DESCRIPTION| PIN NO.| DESCRIPTION
1| GND| 5| +12V
2| GND| 6| +12V
3| GND| 7| +12V
4| GND| 8| +12V
J_AUDIO1 : Internal Audio Connector for IEI Audio Module

PIN NO.| DESCRIPTION| PIN NO.| DESCRIPTION
1| HDA_SYNC| 2| HDA_BIT_CLK
3| HDA_SDOUT| 4| HDA_SPKR
5| HDA_SDIN| 6| HDA_RST#
7| HDA_VCC| 8| HDAGND
9| HDA+12V| 10| HDA_GND
BAT1: RTC Battery Connector

PIN NO.| DESCRIPTION| PIN NO.| DESCRIPTION
1| VBATT| 2| GND
CHASSIS1: Chassis Intrusion Connector

PIN NO.| DESCRIPTION| PIN NO.| DESCRIPTION
1| +3.3VSB| 2| CHASSIS_OPEN
DIO1 : Digital Input/Output Connector

PIN NO.| DESCRIPTION| PIN NO.| DESCRIPTION
1| GND| 2| VCC
3| Output 5| 4| Output 4
5| Output 3| 6| Output 2
7| Output 1| 8| Output 0
9| Input 5| 10| Input 4
11| Input 3| 12| Input 2
13| Input 1| 14| Input 0
DBG_SPI1: EC Debug Connector

PIN NO.| DESCRIPTION| PIN NO.| DESCRIPTION
1| NC| 4| EDICLK
2| EDICS| 5| EDIDI
3| EDIDO| 6| GND
CPU_FAN1, SYS_FAN: CPU/System Fan Connector

PIN NO.| DESCRIPTION| PIN NO.| DESCRIPTION
1| GND| 3| FANIO
2| +12V| 4| PWM
JSPI1: Flash SPI ROM Connector

PIN NO.| DESCRIPTION| PIN NO.| DESCRIPTION
1| +V3.3M_SPI_CON| 4| SPI_CLK_SW
2| SPI_CS| 5| SPI_SI_SW
3| SPI_SO_SW| 6| GND
JEC1: Flash EC ROM Connector

PIN NO.| DESCRIPTION| PIN NO.| DESCRIPTION
1| FSCE#| 2| VCC
3| FMISO| 4| NC
5| EC_DET_FLASH| 6| FSCK
7| GND| 8| FMOSI
F_PANEL1: Front Panel Connector

| PIN| DESCRIPTION| PIN| DESCRIPTION|
PWR LED| 1| PWR_LED+| 2| BEEP_PWR| SPKR
3| NC| 4| NC
5| PWR_LED-| 6| NC
PWR BTN| 7| PWR_BTN+| 8| PC_BEEP
9| PWR_BTN-| 10| NC|
HDD LED| 11| HDD_LED+| 12| Reset+| RESET
13| HDD_LED-| 14| Reset-
I2C1: I 2C Connector

PIN NO.| DESCRIPTION| PIN NO.| DESCRIPTION
1| GND| 3| I2C_CLK
2| I2C_DATA| 4| +5V
LED_LAN1: LAN1 Link LED Connector

PIN| DESCRIPTION| PIN| DESCRIPTION
1| +3.3V| 2| LAN1_LED_LNK#_ACT
LED_LAN2: LAN2 Link LED Connector

PIN| DESCRIPTION| PIN| DESCRIPTION
1| +3.3V| 2| LAN2_LED_LNK#_ACT
COM1, COM2: RS-232 Serial Port Connectors

PIN NO.| DESCRIPTION| PIN NO.| DESCRIPTION
1| DCD| 2| DSR
3| RXD| 4| RTS
5| TXD| 6| CTS
7| DTR| 8| RI
9| GND| 10| GND
COM3, COM4: RS-422/428 Serial Port Connectors

PIN NO.| DESCRIPTION| PIN NO.| DESCRIPTION
1| RXD422-| 3| TXD422+/TXD485+
2| RXD422+| 4| TXD422-/TXD485-

S_ATA3, S_ATA4, S_ATA5, S_ATA6: SATA 6Gb/s Connectors

PIN NO.| DESCRIPTION| PIN NO.| DESCRIPTION
1| GND| 5| SATA_RX‐
2| SATA_TX+| 6| SATA RX+
3| SATA_TX‐| 7| GND
4| GND| 8| N/C
SMB1: SM Bus Connector

PIN NO.| DESCRIPTION| PIN NO.| DESCRIPTION
1| GND| 3| SMB_CLK
2| SMB_DATA| 4| +5V
JUSB3, JUSB4, JUSB5: Internal USB 2.0 Connectors

PIN NO.| DESCRIPTION| PIN NO.| DESCRIPTION
1| VCC| 2| GND
3| USB_DATA-| 4| USB_DATA+
5| USB_DATA+| 6| USB_DATA-
7| GND| 8| VCC
USB1: Internal USB 3.2 Gen 1 Connector (Type-A)

PIN NO.| DESCRIPTION| PIN NO.| DESCRIPTION
1| VCC| 6| USB3_RX+
2| USB_DATA-| 7| GND
3| USB_DATA+| 8| USB3_TX-
4| GND| 9| USB3_TX+
5| USB3_RX-|
JUSB3-1: Internal USB 3.2 Gen 1 Connector

PIN NO.| DESCRIPTION| PIN NO.| DESCRIPTION
1| VCC| 11| USB_DATA+
2| USBRX-| 12| USB DATA-
3| USB_RX+| 13| GND
4| GND| 14| USB3_TX+
5| USB3TX-| 15| USB3 TX-
6| USB3_TX+| 16| GND
7| GND| 17| USB3_RX+
8| USB3_DATA-| 18| USB3_RX-
9| USB3_DATA+| 19| VCC
10| NC|
M2_A1: M.2 A-key Slot

PIN NO.| DESCRIPTION| PIN NO.| DESCRIPTION
1| GND| 2| +3.3V
3| USB+| 4| +3.3V
5| USB-| 6| NC
7| GND| 8| Module Key
---|---|---|---
9| Module Key| 10| Module Key
11| Module Key| 12| Module Key
13| Module Key| 14| Module Key
15| Module Key| 16| NC
17| NC| 18| GND
19| NC| 20| NC
21| NC| 22| NC
23| GND| 24| GND
25| NC| 26| NC
27| NC| 28| NC
29| GND| 30| GND
31| NC| 32| NC
33| GND| 34| NC
35| PCIE_TXP1| 36| GND
37| PCIE_TXN1| 38| NC
39| GND| 40| NC
41| PCIE_RXP1| 42| NC
43| PCIE_RXN1| 44| NC
45| GND| 46| NC
47| PCIE_CLKP0| 48| NC
49| PCIE_CLKN0| 50| NC
51| GND| 52| PLT_RST
53| CLKREQ0#| 54| Pull up +3.3V
55| PCIE_WAKE| 56| Pull up +3.3V
57| GND| 58| M2_DAT
59| PCIE_TXP2| 60| M2_CLK
61| PCIE_TXN2| 62| NC
63| GND| 64| NC
65| PCIE_RXP2| 66| M2_RST
67| PCIE_RXN2| 68| CLKREQ0#
69| GND| 70| PCIE_WAKE
71| PCIE_CLKP1| 72| +3.3V
73| PCIE_CLKN1| 74| +3.3V
75| GND|
M2_M1: M.2 M-key Slot

PIN NO.| DESCRIPTION| PIN NO.| DESCRIPTION
1| GND| 2| +3.3V
3| GND| 4| +3.3V
5| PCIE_RXN3| 6| N/C
7| PCIE_RXP3| 8| N/C
9| GND| 10| DAS/DSS#
11| PCIE_TXN3| 12| +3.3V
13| PCIE_TXP3| 14| +3.3V
15| GND| 16| +3.3V
17| PCIE_RXN2| 18| +3.3V
19| PCIE_RXP2| 20| N/C
21| GND| 22| N/C
23| PCIE_TXN2| 24| N/C
25| PCIE_TXP2| 26| N/C
27| GND| 28| N/C
29| PCIE_RXN1| 30| N/C
31| PCIE_RXP1| 32| N/C
33| GND| 34| N/C
35| PCIE_TXN1| 36| N/C
37| PCIE_TXP1| 38| DEVSLP
39| GND| 40| N/C
41| PCIE_RXN0| 42| N/C
43| PCIE_RXP0| 44| N/C
45| GND| 46| N/C
47| PCIE_TXN0| 48| N/C
49| PCIE_TXP0| 50| PERST#
51| GND| 52| CLKREQ#
53| REFCLKN| 54| PEWAKE
55| REFCLKP| 56| N/C
57| GND| 58| N/C
59| Module Key| 60| Module Key
61| Module Key| 62| Module Key
63| Module Key| 64| Module Key
65| Module Key| 66| Module Key
---|---|---|---
67| NC| 68| SUSCLK
69| PEDET| 70| +3.3V
71| GND| 72| +3.3V
73| GND| 74| +3.3V
75| GND|
M2_B1: M.2 B-key Slot

PIN NO.| DESCRIPTION| PIN NO.| DESCRIPTION
1| CONFIG_3| 2| +3.3V
3| GND| 4| +3.3V
5| GND| 6| NC
7| USB+| 8| NC
9| USB-| 10| NC
11| GND| 12| Module Key
13| Module Key| 14| Module Key
15| Module Key| 16| Module Key
17| Module Key| 18| Module Key
19| Module Key| 20| NC
21| CONFIG_0| 22| NC
23| PCH_WAKE_N| 24| NC
25| NC| 26| NC
27| GND| 28| NC
29| PCIE_RXN1| 30| SIM_RST
31| PCIE_RXP1| 32| SIM_CLK
33| GND| 34| SIM_IO
35| PCIE_TXN1| 36| SIM_VCC
37| PCIE_TXP1| 38| NC
39| GND| 40| NC
41| PCIE_RXP0| 42| NC
43| PCIE_RXN0| 44| NC
45| GND| 46| NC
47| PCIE_TXN0| 48| NC
49| PCIE_TXP0| 50| M2_RST
51| GND| 52| CLKREQ0#
---|---|---|---
53| PCIE_CLKN0| 54| PCH_WAKE_N
55| PCIE_CLKP0| 56| NC
57| GND| 58| NC
59| NC| 60| NC
61| NC| 62| NC
63| NC| 64| NC
65| NC| 66| NC
67| M2_RST| 68| NC
69| M2BCONF| 70| +3.3V
71| GND| 72| +3.3V
73| GND| 74| +3.3V
75| GND|
SIM1: SIM Card Slot

PIN NO.| DESCRIPTION| PIN NO.| DESCRIPTION
C1| SIM_VCC| C5| GND
C2| SIM_RST| C6| NC
C3| SIM_CLOCK| C7| SIM_IO
LAN1, LAN2: External 2.5GbE RJ-45 Connectors

PIN NO.| DESCRIPTION| PIN NO.| DESCRIPTION
1| MDIA3-| 5| MDIA1+
2| MDIA3+| 6| MDIA2+
3.| MDIA2-| 7| MDIA0-
4.| MDIA1-| 8| MDIA0+
HDMI1: External HDMI Connector

PIN NO.| DESCRIPTION| PIN NO.| DESCRIPTION
21| HDMI_DATA2| 31| GND
22| GND| 32| HDMI_CLK#
23| HDMI_DATA2#| 33| N/C
24| HDMI_DATA1| 34| N/C
25| GND| 35| HDMI_SCL
26| HDMI_DATA1#| 36| HDMI_SDA
27| HDMI_DATA0| 37| GND
28| GND| 38| +5V
29| HDMI_DATA0#| 39| HDMI_HPD
30| HDMI_CLK|
CN1, CN2: External USB 3.2 Gen 1 Connectors (Type-A)

PIN NO.| DESCRIPTION| PIN NO.| DESCRIPTION
1| VCC| 6| USB3_RX+
2| USB_DATA-| 7| GND
3| USB_DATA+| 8| USB3_TX-
4| GND| 9| USB3_TX+
5| USB3_RX-|
CON1: External USB 3.2 Gen 2 Connector (Type-C)

PIN NO.| DESCRIPTION| PIN NO.| DESCRIPTION
A1| GND| B12| GND
A2| TX1+| B11| RX1+
A3| TX1-| B10| RX1-
A4| VBUS| B9| VBUS
A5| CC1| B8| SBU2
A6| D+| B7| NC
A7| D-| B6| NC
A8| SBU1| B5| VCONN
A9| VBUS| B4| VBUS
A10| RX2-| B3| TX2-
A11| RX2+| B2| TX2+
A12| GND| B1| GND

Board Layout: Jumper and Connector Locations

Documents / Resources

| icp PCIE-Q470 Full-size PICMG 1.3 CPU Card [pdf] Installation Guide
PCIE-Q470 Full-size PICMG 1.3 CPU Card, PCIE-Q470, Full-size PICMG 1.3 CPU Card, CPU Card, Card
---|---

References

• IEI Resource Download - IEI
• IEI Resource Download - IEI

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>