novolink LS-101B-WLVCTL Smart Wireless Controller for Low-Voltage Landscape Transformers User Guide
- June 5, 2024
- NOVOLINK
Table of Contents
Novolin LS-101B-WLVCTL Smart Wireless Controller for Low-Voltage
Landscape Transformers
Download the App
Controller Position
Inside the Connector
Setup
-
Download the Novolink Lightscape™ App from Google Play (Android) or the App Store (iOS).
-
Turn OFF power to the Low-Voltage Transformer at the circuit breaker or fuse. Test to ensure the power is OFF.
-
Assemble the Controller.
-
Locate the Controller’s Connector, and pull the tabs up to remove the caps.
-
Choose a section of the low-voltage line between the transformer and the first light fixture, with enough slack in the line. Cut it here with wire-cutters.
-
Take each end of the cut low-voltage line and lead it through its corresponding channel, marked either From the Transformer or marked To Lights, respectively. Snap the caps back in place.
-
Plant the stake into the ground and settle the connector above or below the ground.
-
Reconnect power to the transformer and turn it ON. IMPORTANT: Any timers or photo sensors must
be turned OFF, and the transformer must remain continuously ON. -
Open the Novolink Lightscape™ App, and add the Controller. Assign it a zone.
Need more help? Visit: novolinkinc.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>