Chwfio B0CH812FGR Wireless HDMI Transmitter and Receiver User Guide
- June 1, 2024
- Chwfio
Table of Contents
**Chwfio B0CH812FGR Wireless HDMI Transmitter and Receiver User Guide
**
Charger Instructions
Power on the TX and RX with original 5V/2A adapter&USB-C cable.
Connect the HDMI IN on TX and HDMI OUT 1 Port on RX with HDMI Cable within
1.5m,
During pairing, the RX connection LED blinks green rapidly and then stays on,
and the TX link LED stays on green. That means the pairing is successful.
- After paining successfully, it is necessary to disconnect the TX/RX power supply and re-power it when you need use
- If you find that TX/RX can’t be connected properly or need to add additional RX, please refer to the pairing steps.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>