winco SCAL-D22 Digital Portion Control Scale Instruction Manual

: June 9, 2024
: WINCO

Table of Contents

Care and Use
Specifications
Features
Safety
Service and Repair
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SCAL-D22 Digital Portion Control Scale
Instruction Manual

Care and Use

Read and understand all operating instructions before using this product. Keep this manual for future reference.
Exceeding the scale’s capacity or dropping items on the scale can damage the weigh-ing mechanism and/or affect the accuracy of the scale. Avoid shaking, dropping, or otherwise shocking the scale. Gently apply all items to be weighed on tray top. This is a precision instruction and must be handled with extreme care.
Do not use or store the scale in high temperature, high humidity or high vibration conditions. The scale works better when operated at a normal room temperature. Always allow the scale to acclimate to a normal room temperature for at least one hour before use.
Remove batteries from the scale when it will not be used for an extended period of time.
Using a mild soap solution, dampen a cloth to clean the scale. Do not use any harsh chemical cleaners. Do not wash down or immerse the scale. Any liquid inside the scale can cause permanent damage.
Keep your scale in a clean environment. Dust, dirt, moisture, vibration, air currents, and a close distance to other electronic equipment can all cause an adverse effect on the reliability and accuracy of your scale.

Specifications

Model	SCAL-D22
Max Capacity	LB unit: 22Ib x 0.001Ib

OZ unit: 352oz x 0.01oz
LB:OZ unit: 22Ib x 0.1oz
KG unit: 10kg x 0.001kg
G unit: 10000g x 0.5g
Weighing Modes| lb:oz, lb, oz, kg, g
Display| 60x23mm (2.3″ x .9″) LCD display with backlight
Operating Temp.| 41° – 104°F (5° – 40°C)
Power| Alkaline Batteries: 3 x “AAA” size cells
Adapter: 6V adapter
Functions| Weighing, Tare, Hold, Unit switching, Part counting, Light, Low battery and Overload indication, Auto-off function
Tare Range| Up to full capacity
Platform Size| 150 x 150mm (L x W) – 5.9″ x 5.9″ (L x W)
Scale Dimensions| 151.3 x 214.7 x 49 mm (L x W x H) – 5.95″ x 8.45″ x 1.93″ (L x W x H)

Features

Battery Installation and Power Supply
Install 3 x AAA batteries into battery compartment at the back of the scale. Or power the scale by using an external power supply.
NOTE: Battery and power supply can be used at the same time. If being used simultaneously, the scale will use the power supply as the priority. The power supply will not charge the battery.
Power ON
Place the scale on a hard, flat and level surface. Press ON/OFF key to power it on, a few seconds later it displays zero weight and wait for weighing mode.
Power OFF
When the scale is powered by batteries, it turns off automatically after (3) minutes of inactivity. When the scale is powered by an adapter, press ON/OFF key to power it off.

Unit Change
You can choose the display weight as lb, oz, lb:oz, kg, or g. When in weigh- ing mode, press the UNIT key to toggle between the units of measure.
Normal Weighing
Place the object on the center of the platform, the scale will display the weight of the object when reading is stable.
TARE Function
When the weight reading is stable and reading 0.0, you can place and item on scale and wait for a stable weight, then press TARE key to tare the weight off the scale.
COUNT Function

Put the relevant amount of goods that you are going to count as the sample (25, 50, 75, 100)
Press and hold COUNT key for two seconds, then you will see “25”.
Press UNIT key to toggle from 25, 50, 75 to 100. Please select the number that you are willing to put as the sample quantity.
Press COUNT key to confirm.
Now you can put the goods that you want to count on the center of the platform and the LCD will show the actual quantities of the goods on the platform.
To exit COUNT function, press UNIT key.

LIGHT Function
In normal weighing mode, you can press LIGHT key to turn the backlight ON or OFF.
Calibration (Must have a calibrated 5kg or 10kg weight)

When the scale is powered on, press and hold UNIT key for more than three seconds until it displays a flashing number 5000 g, indicating the weights you need to place on the platform.
Place 5kg weight on the center of the platform. When stable, the scale will automatically display 10000 g.
Place the 10kg weight on the platform, when stable, the display will show PASS. 4. Calibration is finished and the scale is ready for weighing.

Safety

A WINCO” approved service technician should carry out repairs if necessary. Do not remove any components or service panels on this product.
If the power cord is damaged, it must be replaced by a WINCO” approved service technician in order to avoid a hazard.

| WARNING
---|---
Electrical Shock Hazard
Keep water and other liquids from entering the inside of the unit. liquid inside the unit could cause an electrical shock.
Do not spray water or cleaning products. Liquid could contact the electrical components and cause a short circuit or an electrical shock. Do not use unit if power cord is damaged or has been modified.

Service and Repair

There are no user serviceable parts within this appliance.
To avoid seriosus injury or damage, NEVER attempt to repair the unit yourself.
To initiate warranty service contact:
Email: support@wincous.com
Or call: 973-295-3899
DO NOT send the unit to WINCO until you’ve contacted our customer service department first.

Thank you for purchasing this digital portion scale. Winco’ takes pride in the quality of our products. When used as intended and with proper care and maintenance, you will experience years of reliable operation. To ensure the best results, please read and follow the instructions in this manual carefully. Save these instructions for future reference.