Cell2 SceneMax Warning Modules User Manual
- June 9, 2024
- Cell2
Table of Contents
SceneMax Warning Modules
User Manual
SceneMax Warning Modules
WIRING
MOUNTING DIMENSIONS
OPERATION
For Flash Pattern Selection:
Each Warning Memory may select and save one flash pattern. While activating a
warning mode, momentarily apply YELLOW wire to +VDC:
- Once to next pattern
- Quick three times to Default (refer to Flash Pattern Chart)
For Synchronization & Scene-to-Cruise Setting:
1. Apply +VDC to RED or GREEN and YELLOW wires simultaneously to enter
SETTING MODE; the lighthead will display short flashes:
- Single flash in left = Group 1 (Sim.)
- Double flash in left = Group 2 (Alt.)
- Single flash in right = Group 1 (Sim.) with Scene-to-Cruise enabled*.
- Double flash in right = Group 2 (Alt.) with Scene-to-Cruise enabled.
Scene-to-Cruise enabled : While Scene-to-Cruise enabled for the warningwire, upper warning light will turn into cruise mode automatically when the warning wire and scene light wire are activated together. Deactivate scene light wire, upper warning light will revert to warning mode.
2. Remove YELLOW wire from +VDC then momentarily apply to +VDC to change
setting.
3. Save and exit SETTING MODE by disconnecting all power.
NOTE1: Same Group will flash simultaneously; different Group will flash
alternately.
NOTE2: Group setting for each wire must be set independently.
Reset to Factory Default Settings:
- Apply +VDC to RED or GREEN and YELLOW wires simultaneously to enter SETTING MODE.
- Remove YELLOW wire from +VDC then apply to +VDC again for more than 5 seconds. The lighthead will display fast short flashes to signify restoring successfully.
- Save and exit SETTING MODE by disconnecting all power.
Flash Pattern
| 1 | Double [2Hz] | 16 | Single H/L |
|---|---|---|---|
| 2 | Single [2Hz] | 17 | Single-Triple-Quint |
| 3 | Triple [2Hz] | 18 | Steady Scene |
| 4 | Quad [2Hz] | 19 | Single [Split] |
| 5 | Random | 20 | Double [Split] |
| 6 | Steady EF** | 21 | Quad [Split] |
| 7 | Single [SAE/CA13] | 22 | Quint [Split] |
| 8 | Double [SAE] | 23 | Mega [Split] |
| 9 | Triple [SAE] | 24 | Ultra [Split] |
| 10 | Quad [SAE] | 25 | Single-Quad [Split] |
| 11 | Quint [SAE] | 26 | Single H/L [Split] |
| 12 | Mega | 27 | Cruise L |
| 13 | Giga | 28 | Cruise M |
| 14 | Ultra [SAE] | 29 | Cruise H |
| 15 | Single-Quad |
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>