Marshall Stockwell II BT Portable Stereo Loudspeaker User Guide

June 9, 2024
Marshall

Marshall-logo

Marshall Stockwell II BT Portable Stereo Loudspeaker

Marshall-Stockwell-II-BT-Portable-Stereo-Loudspeaker-
PRODUCT

INSTALLATION INSTRUCTIONS

Marshall-Stockwell-II-BT-Portable-Stereo-Loudspeaker-
FIG-1 Marshall-Stockwell-II-BT-Portable-Stereo-Loudspeaker-
FIG-3

LEGAL NOTICE

Design of device and packaging are intellectual properties of Zound Industries International AB and Marshall Amplification Plc. © All Rights Reserved. Zound Industries International AB is hereinafter referred to as “Zound Industries” or “manufacturer”. MARSHALL, Marshall Amps, their respective logos, “Marshall” and “Marshall” trade dress are trademarks and intellectual property of Marshall Amplification Plc and may not be used without permission. Permission granted to Zound Industries International AB. Qualcomm aptX is a product of Qualcomm Technologies International, Ltd. Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries, used with permission. aptX is a trademark of Qualcomm Technologies International, Ltd., registered in the United States and other countries, used with permission. The Bluetooth® wordmark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Zound Industries is under license. All other trademarks are the property of their respective owners and may not be used without permission. For more legal information related to this product and to its use in your specific region, and for more detailed information about Zound Industries and partner & license information, please visit the website: www.marshallheadphones.com The user is recommended to visit the Website regularly for up-to-date information. Zound Industries International AB, Centralplan 15, 111 20 Stockholm, Sweden

FCC STATEMENT

Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device complies with the FCC radiation exposure limits set forth for an uncontrolled environment. This device must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

U.S. responsible party, contact information:
Zound Industries USA, Inc. 260 W 39th Street Suite 1101, New York NY 10018, USA Telephone number: 646-214-1003

IC STATEMENT
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Exposure of humans to RF fields (RSS-102)
The radiated energy from the antennas connected to the wireless adapters conforms to the IC limit of the RF exposure requirement regarding IC RSS-102, Issue 5 clause 4. SAR tests are conducted using recommended operating positions accepted by the RSS with the device transmitting at its highest certified power level in all tested frequency band without distance attaching away from the body.  This Class B digital device complies with Canadian ICES-003.

IMPORTANT SAFETY INSTRUCTIONS

  1. Read these instructions.
  2. Keep these instructions.
  3. Heed all warnings.
  4. Follow all instructions.
  5. Do not use this apparatus near water.
  6. Clean only with a dry cloth.
  7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
  8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
  9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
  10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
  11. Only use attachments/accessories specified by the manufacturer.
  12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart or rack is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
  13. Unplug this apparatus during lightning storms or when unused for long periods of time.
  14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

WARNING

  • This is not a toy. Keep this product and its accessories away from young children.
  • Follow the electrical and safety information on the underside of the product before installing or operating it.
  • Additional country-specific certification markings can be found under the protective silicone sleeve.
  • To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Do not expose to dripping or splashing. Objects filled with liquids, such as vases, shall not be placed on apparatus.
  • Do not drop the product.
  • Do not cover the product, as this may cause overheating.
  • Placing your ears too close to the speaker could damage your hearing.
  • Do not listen for an extended period of time at a high sound pressure level.
  • Do not insert body parts or other objects into the bass port as this may result in injury.
  • Do not install the product in an area that impedes access to the power source.
  • The internal battery is not end-user replaceable. Do not attempt to remove the battery from this product.
  • Do not expose the battery to excessive heat such as direct sunlight, naked flame or similar.

INSTALLATION & CONNECTION

  • Connect the product only to the correct mains voltage as shown on the equipment.
  • Use only standard USB-C cables connected to a USB power source to charge this product.
  • Do not install this equipment in a confined or enclosed space. Maintain well-ventilated conditions during operation. The ventilation should not be impeded by covering openings with items such as newspaper, table-cloths, curtains etc.
  • Install this speaker on a stable and level surface.
  • No naked flame sources, such as lighted candles, should be placed on or near the apparatus.

DISPOSAL & RECYCLING INFORMATION

The crossed-out wheeled bin symbol on your product (and any internal batteries and other electronic accessories) indicates that they should not be disposed of as unsorted household waste. Your product, batteries and electronic accessories should be handed over to a certified collection point for recycling or proper disposal at the end of their life. For more information related to disposal and recycling, visit the website: www.marshallheadphones.com

DISCLAIMER
For use with mobile devices using 3.5 mm plugjack unprotected two-way standard. Stated play time is calculated using a random selection of music, played at medium volume.

DECLARATION OF CONFORMITY

Hereby, Zound Industries International AB, declares that this product is in compliance with 2014/53/EU. Maximum RF transmit power: < 20 dBm For the declaration of conformity, please visit the following website: www.marshallheadphones.com/doc MARSHALLHEADPHONES.COM

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Marshall User Manuals

Related Manuals