ESL VISION 860 SERIES Strip Retrofit Instruction Manual
- June 9, 2024
- ESL VISION
Table of Contents
ESL VISION 860 SERIES Strip Retrofit Instruction Manual
WARNING
- To avoid electric shock, disconnect power at source prior to installation.
- The installation should be performed by qualified electricians or lighting technicians.
- Before conducting any installation, maintenance, or removal, disable all power.
- Do not touch the fixture while it is in service.
- If there is any problem with the fixture, turn off power and DO NOT attempt repair unless you are a qualified technician or the customer service member.
Retrofit Installation
-
Disconnect and remove the existing ballast cover, ballast, socket bars, and wiring.
-
Cut apart and install the included brackets as shown. For the 8ft fixture, use the larger center bracket to join the fixture halves.
-
Make electrical connections as shown in Wiring Diagrams 1 and 2.
Install the LED retrofit assembly.
-
Install optional lens. Restore power and turn on.
Wiring Diagram 1
Wiring Diagram 2
Field Adjustable Wattage and CCT
- Kelvin and wattage can be adjusted using the dip switches located on the driver.
- Select the desired kelvin and wattage by sliding the dip switch.
Support
Copyright © 2022 ESL Vision, LLC. All rights reserved. Rev: 07/26/22
888.493.5559
info.eslvision.com
www.eslvision.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>