anko IM 2023 OL Metal Gate Instruction Manual
- June 17, 2024
- Anko
Table of Contents
Metal Gate With Extensions
» fits openings:
75cm – 83cm (no extensions)
85cm – 93cm (1x 10cm extension)
95cm -103cm (2 x 10cm extensions)
Instruction Manual
IM 2023 OL Metal Gate
SCAN HERE FOR MORE INFORMATION ON INSTALLATION OR SPARE PARTS. OR VISIT:
CHILDSAFETYHELP.COM.AU
IMPORTANT! READ AND FOLLOW THESE INSTRUCTIONS CAREFULLY AND KEEP FOR FUTURE
REFERENCE.
THIS PRODUCT CONFORMS TO EN1930:2011
WARNINGS
WARNING To prevent serious injury or death, securely install gate or
enclosure and use according to manufacturer’s instructions.
WARNING Never leave child unattended when using this product.
WARNING Incorrect installation can be dangerous.
WARNING Do not use the safety barrier if any components are damaged,
missing or disassembled.
WARNING The safety barrier must not be fitted across windows.
WARNING Never use with a child able to climb over or dislodge/open the
safety barrier which may cause danger.
WARNING Never install this product on glass doors. Install this product
against reliable doors or walls.
WARNING To prevent falls, never use this product at the top of stairs.
WARNING If the safety barrier is used at the bottom of the stairs, it
should be positioned at the front of the lowest tread possible.
WARNING To prevent injury, do not put any goods which can be grabbed by
children or pets near this product.
WARNING Before using this product, carefully inspect for any loose parts
and whether any parts need to be tightened.
WARNING Ensure the product to be installed is horizontal and flat on the
floor.
WARNING This product is intended for use with children from 6 to 24
months or small to medium pets.
WARNING Safety barrier should be checked regularly to ensure that it is
secure and functioning in accordance with these instructions.
WARNING Any additional or replacement parts should be obtained from the
Customer Service Centre of the entity you purchased this product.
WARNING Barrier must be fitted between rigid surfaces such as plaster
board, timber or hardwall.
WARNING Always check that the safety barrier is correctly closed.
WARNING Use only with the locking/latching mechanism securely engaged.
WARNING This safety barrier is for domestic use only.
WARNING Never use without Wall Cups.
WARNING This safety barrier must be fitted between a rigid surface such
as doorways, walls and stair posts along with Wall Cups secured with screws.
WARNING This safety barrier has a manual closing system.
PARTS
INCLUDES
INSTALLATION
NOTE
Once the gate has been unpacked, you may notice a gap at the door opening.
This is normal with pressure mounted gates and the gap will disappear when it
is installed correctly.
GATE PLACEMENT
Gate must be installed in a structurally sound opening. Ensure mounting
surface (wall, door frame, stair etc.) is strong, rigid and has an even
surface.
If using gate on a stairway, it must be placed on the lowest step.
EXTENSIONS
- Measure the space to be enclosed. You may need to use extensions.
| Gate with no extensions fits: | 75cm – 83cm |
|---|---|
| Gate with 1x 10cm extension fits: | 85cm – 93cm |
| Gate with 2 x 10cm extensions fits: | 95cm -103cm |
Note: Only use one extension on each side of gate. If no extensions are required, substitute the Extension Pins with the Adjuster Bolts.
OPENING OR DOORWAY
-
Screw Adjuster Bolts and Adjuster Screws together and then place into mounting holes in each corner of gate.
-
Place gate in the opening and ensure the bottom rail is completely flat on the floor and Wall Cups are directly above each other. Mark the position of each Wall Cup on the wall and/or stair post.
-
Stick the Wall Cups in position using the Adhesive Pads and then place gate into position.
For added security, fix each cup to the wall using a small Phillips head screwdriver (not included) and the Screws provided.
-
Align gate with Wall Cups and tighten Adjuster Screws by turning clockwise, starting with the bottom Adjuster Screws, then tighten the top Adjuster Screws. Tighten equally until there is only a 1.5mm gap in the locking mechanism. Regularly check tension of all Adjuster Bolts and ensure the gate is secure.
Note: Do not extend Adjuster Bolts more than 57mm.
Note: Do not overtighten.
Allow 1.5mm gap in the locking mechanism.
OPERATION
HOW TO OPEN GATE
Using one
hand, place thumb on the button and grip Gate Panel with fingers. Slide button
across and lift Gate Panel simultaneously.
Open gate in either direction.
When released, gate will swing closed automatically.
To enable stay open feature, open gate to 90° angle.
Always check gate is properly closed when in use.
Note: If gate is open and excessive pressure is applied, (such as
standing or swinging on the gate) structural damage may occur.
MAINTENANCE
CARE INSTRUCTIONS
Simply use a soft damp cloth to wipe gate and dry thoroughly after cleaning.
Do not use chemicals or abrasive cleaners.
IMAGES/DRAWINGS IN THE MANUAL ARE FOR VISUAL PURPOSES ONLY. ACTUAL PRODUCT MAY
VARY SLIGHTLY. THE MANUFACTURER RESERVES THE RIGHT TO CHANGE ANY SPECIFICATION
OR FEATURE WITHOUT PRIOR NOTICE.
MADE IN CHINA
CUSTOMER SERVICE:
KMART AU: 1800 124 125
KMART NZ: 0800 945 995
TARGET AU: 1300 753 567
K: 43-363-872
T: 68-948-924
AFTER SALES SUPPORT:
AU: 03 9005 0127. NZ: 0800 945 995
WWW.CHILDSAFETYHELP.COM.AU
SCAN HERE FOR
MORE INFORMATION ON INSTALLATION OR SPARE PARTS
https://qrstud.io/zbxjqoz
Documents / Resources
| anko
IM 2023 OL Metal
Gate
[pdf] Instruction Manual
IM 2023 OL, IM 2023 OL Metal Gate, Metal Gate, Gate
---|---