CyberPower UT1500EG Backup UPS Systems User Guide

June 9, 2024
CyberPower

CyberPower UT1500EG Backup UPS Systems User Guide

SAFETY

  • CAUTION! DO NOT USE FOR MEDICAL OR LIFE SUPPORT EQUIPMENT!
  • CAUTION! To prevent the risk of fire or electric shock, install in a temperature and humidity controlled indoor area, free of conductive contaminants.
  • CAUTION! To avoid electrical shock, turn off the unit and unplug it from the AC power source before servicing the battery or installing a computer component.
  • CAUTION! DO NOT USE WITH OR NEAR AQUARIUMS!
  • CAUTION! DO NOT USE WITH LASER PRINTERS!
  • CAUTION! Servicing of batteries should be performed or supervised by personnel knowledgeable of batteries and the required precautions. Keep unauthorized personnel away from batteries.

UNPACKING

*PowerPanel® Personal software is available on our website. Please visit www.cyberpower.com and go to the Software Section for free download.

INSTALLATION

Recharging the battery for at least 8 hours is recommended to ensure that the battery’s maximum charge capacity is achieved. If you will use the software, connect the USB cable to the USB port on the UPS. To protect a fax, telephone, modem line or network cable, connect a telephone cable or network cable from the wall jack outlet to the IN jack of the UPS. Then connect a telephone cable or network cable from the OUT jack on the UPS to the modem, computer, telephone, fax machine, or network device.

DEFINITIONS OF THE LED INDICATORS

LED ON Flash
Green ECO Mode Charging
Yellow Battery Mode Low Battery
Red Fault Overload

DESCRIPTION

Product Overview
Product Overview

  1. Power Switch
  2. Power on LED
  3. USB Charger Port
  4. AC outlet
  5. Communication Protection Ports
  6. Circuit Breaker
  7. Input Power Cord
  8. USB Port to PC

PRODUCT REGISTRATION

Prompt product registration assures coverage under the Limited Warranty, and also allows the opportunity to be notified of product enhancements, upgrades, and other announcements. Registration is quick and easy. Go to Product Registration page at www.cyberpower.com/product_registration

Cyber Power Systems, Inc.
www.cyberpower.com

For technical support, contact CyberPower at www.cyberpower.com/contact Copyright © 2022 Cyber Power Systems, Inc. All rights reserved. 11F., No.26, Jinzhuang Rd., Neihu Dist., Taipei City 114, Taiwan

Logo

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals