ANKER 568 USB-C Docking Station User Manual
- June 9, 2024
- Anker
Table of Contents
ANKER 568 USB-C Docking Station
At a Glance
*The USB-C ports of host devices must support Power Delivery and DisplayPort Alt Mode.
- 1 USB-C Upstream Port
- HDMI 2.0 Port
- DisplayPort 1.4
- Ethernet Port
- USB-A 3.0 Port
- USB-A 2.0 Port
- DC-IN Port
- USB-C 3.2 Gen 2 Port
- LED Indicator
- Power Button
Connect the dock to a router or modem at 10/100/1000 Mbps via the Ethernet port.
Connect USB-C compatible devices such as SSDs (Solid-State Drive) to the USB-C 3.2 Gen 2 port (10 Gbps). You can also charge your phone or tablet at a maximum of 30W via this port.
Important Safety Instructions
- Avoid dropping.
- Do not disassemble.
- Do not expose to liquids.
- For the safest and fastest charge, use original or certified cables.
- This product is suitable for moderate climates only.
- The maximum ambient temperature when using this product must not exceed 95°F / 35°C.
- Open flame sources, such as candles, must not be placed near this product.
- Only use a dry cloth or brush to clean this product.
Using Your USB-C Docking Station
Power on Your Dock
- Plug one end of the included power adapter into the DC-IN port and the other into a power outlet.
- Press the power button. The LED indicator will turn green
Connect the Dock to Your Laptop
Connect your laptop to the dock’s USB-C upstream port using theprovided cable.
The LED indicator will turn blue, and your laptop will begin charging at a
maximum of 100W.
LED Indicator Guide
| Solid green | Powered on |
|---|---|
| Solid blue | Connected to a laptop |
| Off | Not connected to a laptop |
Video Ports
| Item | DisplayPort 1 | DisplayPort 2 | HDMI Port |
|---|
Single Monitor
| 8K@30Hz| /| /
/| 8K@30Hz| /
/| /| 4K@60Hz
Dual Monitors
| 4K@60Hz| 4K@60Hz| /
4K@60Hz| /| 4K@60Hz
/| 4K@60Hz| 4K@60Hz
Three Monitors| 4K@30Hz| 4K@30Hz| 4K@30Hz
The table above shows the maximum supported resolutions of this dock.
Actual display output will vary based upon the host device specifications.
Trademarks
The Adopted Trademarks HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countrie
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Consult the dealer or an experienced radio/TV technician for help.
The following importer is the responsible party：
Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
Telephone: 1-800-988-7973
IC statement
This device complies with Industry Canada license‐ICES-003.
Operation is subject to the following two conditions: (1) This device may not
cause interference, and (2) This device must accept any interference,
including interference that may cause undesired operation of the device..
This digital apparatus complies with CAN ICES-003(B)/NMB-003(B).
Declaration of Conformity
Hereby, Anker Technology Co., Limited declares that this product is in compliance with Directives 2014/30/EU & 2011/65/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.anker.com.
Declaration of Conformity
Hereby, Anker Innovations Limited declares that this product is in compliance with the following Directives: The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012 & Electromagnetic Compatibility Regulations 2016. The full text of the GB declaration of conformity is available at the following internet address: https://www.anker.com
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok,
Kowloon, Hong Kong
The following importer is the responsible party (for UK matters only):
Anker Technology (UK) Limited｜GNR8, 49 Clarendon Road, Watford, Hertfordshire,
WD17 1HP, United Kingdom The following importer is the responsible party (for
EU matters only): Anker Innovations Deutschland GmbH Georg-Muche-Strasse 3,
80807 Munich, Germany
This symbol indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
Customer Service
Lifetime Technical Support
support@anker.com
support.mea@anker.com (For Middle East and Africa
Only)
(US/CA) +1 (800)988 7973
(UK) +44 (0) 1604 936200
@anker_offcial
@anker_jp
@Anker Deutschland
@Anker Japan
@Anker
@AnkerOffcial
@Anker_JP
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>